Product overview
The GEPRC Cinebot25 HD O3 Quadcopter is a flight platform for aerial video capture, supplied with propulsion, flight-control electronics and an O3 imaging system. Its GEP-CT25 Grey frame has a 115mm wheelbase and combines a reinforced carbon plate with a one-piece injection-molded bottom. Four silicone damping balls isolate the O3 camera to reduce vibration and jello effects. The regular power configuration uses SPEEDX2 1404 4600KV motors and HQprop DT63mm x4 propellers; a separate S sport version uses SPEEDX2 1505 motors.
The electronics combine a TAKER G4 45A AIO flight controller, STM32G473CEU6 MCU, ICM 42688-P gyro and 45A 8Bit ESC. Video equipment comprises the O3 Air Unit, O3 camera and original O3 antenna. Internal space accommodates video transmission equipment, while an access outlet supports SD card and USB use. Rear TYPE-C and BOOT controls support parameter adjustment. A dedicated receiver stand organizes the installation, and aluminum components with straps secure the battery. Receiver choices are PNP with the internal VTX receiver, ELRS 2.4G or TBS Nano RX.
The O3 PNP configuration weighs 182g±1g. Recommended power is a LiHV 4S 660mAh–720mAh battery through an XT30 connector. The stated 5–8-minute flight duration applies to low-speed flight and varies with flying method. The supplied package includes the quadcopter, a propeller pack, battery pads and straps, a Naked GoPro base, an O3 heat sink, spare hardware and installation tools. This is an equipped quadcopter rather than an airframe-only kit; the listed package does not include the recommended flight battery.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product | GEPRC Cinebot25 HD O3 Quadcopter |
| Options | PNP, ELRS 2.4G, TBS Nano RX |
| Power versions | Regular: SPEEDX2 1404 motor; S (sport): SPEEDX2 1505 motor.Regular and S (sport) power versions. |
| Model | Cinebot25 O3 Quadcopter |
| Frame | GEP-CT25 Grey |
| Wheelbase | 115mm |
| Flight controller | TAKER G4 45A AIO |
| MCU | STM32G473CEU6 |
| Gyro | ICM 42688-P |
| Flight controller firmware | TAKERG4AIO |
| ESC | 45A 8Bit ESC |
| Motor | SPEEDX2 1404 4600KVRegular power version. |
| Propellers | HQprop DT63mm x4 |
| Connector | XT30 |
| Video transmitter | O3 AIR Unit |
| Camera | O3 camera |
| Antenna | O3 original antenna |
| Receiver | PNP(internal VTX receiver) / ELRS2.4G / TBS NanoRXPNP uses the internal VTX receiver. |
| Weight | 182g±1gCinebot25 O3 PNP version. |
| Battery | LiHV 4S 660mAh-720mAhRecommended battery. |
| Flight time | 5–8 minutesReference time based on low-speed flight; actual time depends on flying method. |
| Physical construction | Reinforced carbon plate and a one-piece injection-molded bottom made from modified material. |
| Camera vibration isolation | Four silicone damping balls reduce vibration and jello effects.O3 camera installation. |
| Video-system integration and access | Fuselage space accommodates video transmission systems including the O3 Air Unit, with an outlet for SD card and USB access. |
| Adjustment access | Rear TYPE-C connection and BOOT button for parameter adjustment. |
| Receiver and battery mounting | Dedicated receiver fixing stand; battery mounting uses aluminum components and straps. |
| Included equipment | 1 Cinebot25 quadcopter; 1 HQprop DT63mmx4 propeller pack; 2 battery anti-slip pads; 1 battery strap listed as 15150mm; 1 15*180mm battery strap; 1 Naked GoPro base; 1 O3 heat sink; 1 spare screw pack; 1 1.5mm L-shaped screwdriver; 1 frequency-pairing pointer; 1 damping-ball puncher.Supplied configuration. |
| Spare hardware | 2 camera damping balls; 4 M2 nuts; 6 M2*6 button-head screws; 4 M2*18 button-head screws; 4 M1.6*8 round-head screws with collar; 4 M2*5 button-head screws; 4 M1.6*10 Allen screws; 2 M2*12 button-head screws; 2 M2 self-clinching nuts; 2 T-shaped silicone antenna fixings.Included spare screw pack. |
Request a quote for GEPRC Cinebot25 HD O3 Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.