Product overview
The GEPRC Cinebot25 Analog Quadcopter is an aerial-filming platform built around a 115mm wheelbase and GEP-CT25 Grey frame. Its integrated structure combines a reinforced carbon plate with a one-piece injection-molded bottom made from modified material. A shock-absorbing camera protection cover supports footage stability. The O3 anti-shake design uses four silicone damping balls to reduce vibration and jello artifacts. Internal space accommodates video transmission systems including the O3 Air Unit, with an outlet providing access to the SD card slot and USB.
The analog configuration pairs a CADDX Ratel 2 camera with a RAD mini 5.8G 1W video transmitter and Peano 5.8G RHCP UFL antenna. Control electronics comprise a TAKER G4 45A AIO flight controller and 45A 8Bit ESC, with rear TYPE-C and BOOT access for adjustment. The regular version uses SPEEDX2 1404 4600KV motors; the S sport version uses SPEEDX2 1505 motors. Receiver configurations are PNP, ELRS 2.4G and TBS Nano RX. A dedicated receiver stand organizes the installation, while aluminum components and straps provide battery mounting.
The supplied flight platform includes the Cinebot25 quadcopter, a propeller pack, two battery anti-slip pads, two battery straps, a Naked GoPro base, spare hardware and tools. The Analog PNP version weighs 160g±1g. Recommended power is a LiHV 4S 660mAh-720mAh battery, and the power connector is XT30. Flight time is 5–8 minutes as a reference for low-speed flight; actual duration depends on individual flying methods. The accessory package also includes a 1.5mm L-shaped screwdriver, frequency-pairing pointer and damping ball puncher.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Cinebot25 Analog Quadcopter |
| Options | PNP, ELRS 2.4G, TBS Nano RX |
| Power versions | Regular: SPEEDX2 1404 motor; S (sport): SPEEDX2 1505 motor.Regular and S (sport) power versions. |
| Frame | GEP-CT25 Grey |
| Wheelbase | 115mm |
| Flight controller | TAKER G4 45A AIO |
| MCU | STM32G473CEU6 |
| Gyroscope | ICM 42688-P |
| Flight-controller firmware | TAKERG4AIO |
| ESC | 45A 8Bit ESC |
| Motor | SPEEDX2 1404 4600KVRegular power version. |
| Propellers | HQprop DT63mm x4 |
| Connector | XT30 |
| Video transmitter | RAD mini 5.8G 1W |
| Camera | CADDX Ratel 2 |
| Antenna | Peano 5.8G RHCP UFL |
| Receiver configurations | PNP/ ELRS2.4G / TBS NanoRX |
| Weight | 160g±1gCinebot25 Analog PNP version. |
| Recommended battery | LiHV 4S 660mAh-720mAh |
| Flight time | 5–8 minutesReference time based on low-speed flight; actual time depends on individuals’ flying methods. |
| Structural construction | Reinforced carbon plate and a one-piece injection-molded bottom using modified material. |
| Vibration damping | Four silicone damping balls to reduce vibration and jello artifacts.O3 anti-shake design. |
| Video-system integration space | Fuselage space accommodates video transmission systems including the O3 Air Unit, with an outlet for SD card slot and USB access. |
| Rear adjustment access | Rear TYPE-C connection and BOOT button for parameter adjustment. |
| Receiver and battery mounting | Dedicated receiver fixing stand; battery mounting uses aluminum components and straps. |
| Included platform and accessories | 1 Cinebot25 quadcopter; 1 HQprop DT63mmx4 propeller pack; 2 battery anti-slip pads; 1 15150mm battery strap; 1 15*180mm battery strap; 1 Naked GoPro base; 1 reserved screw pack; 1 L-shaped 1.5mm screwdriver; 1 frequency-pairing pointer; 1 damping ball puncher.Supplied package. |
| Spare hardware | 2 camera damping balls; 4 M2 nuts; 6 M2*6 button head screws; 4 M2*18 button head screws; 4 M1.6*8 round-head screws with collar; 4 M2*5 button head screws; 4 M1.6*10 Allen screws; 2 M2*12 button head screws; 2 M2 self-clinching nuts; 2 T-shaped silicone antenna fixings.Included reserved screw pack. |
Request a quote for GEPRC Cinebot25 Analog Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.