Product overview
The FlashHobby CLS4060RP 60KG CLS Servo combines a coreless motor with a programmable PWM digital amplifier and a 32-bit MCU for digitally controlled movement. It operates on 6.0–8.4 Volts DC and supports Sanwa SSR, NB4 and Futaba modes. At 6.0V, operating speed is 0.18sec/60° with 48.0kg-cm/666 oz-in stall torque. At 7.4V, these figures are 0.16sec/60° and 56.0kg-cm/777 oz-in; at 8.4V, they reach 0.14sec/60° and 60.0kg-cm/833 oz-in.
The 40x20x40.50mm servo uses steel gears, a CNC AL6061 aluminum case and a diamond cut aluminum heat sink shell. Its output shaft runs on dual ball bearings and has a 25-tooth spline. Helical gearing provides low backlash, strong engagement, low noise and smooth movement. Weight is 80g±10g without the servo horn, and the connector wire is 300MM long with a JR plug. The case is water resistant and waterproof. Programmable settings cover end points, direction, fail safe, dead band, speed reduction, soft start rate and overload protection, with data save/load and program reset.
