ChinaDroneRequest a quote →

FlashHobby BLS3837MED

The FlashHobby BLS3837MED 37KG BLS Servo combines a brushless motor, steel gears and a 14-bit magnetic encoder for programmable digital control. Operating on 6.0–8.4 Volts DC, it features a CNC AL6061 aluminum case, a dual-ball-bearing-supported output shaft and compatibility with Sanwa SSR, NB4 and Futaba modes.

FlashHobbyDrone frame
Dimensions
40x20x38.00 mm
Weight
80 g
Operating voltage
6.0 ~ 8.4 Volts DC

Get a free quote

Product overview

The FlashHobby BLS3837MED 37KG BLS Servo provides programmable digital control through a PWM digital amplifier, a 32-bit MCU and a 14-bit magnetic encoder. It operates on 6.0–8.4 Volts DC and supports Sanwa SSR, NB4 and Futaba modes. Programmable functions cover end point adjustments, direction, fail safe, dead band, speed reduction, soft start rate and overload protection. Data save/load and program reset functions support configuration management. At 8.4V, the servo delivers 37.0kg-cm/514 oz-in stall torque and an operating speed of 0.07sec/60°.

A brushless motor drives high-precision steel gears, with dual ball bearings supporting the output shaft and a 25-tooth output spline providing the mechanical connection. The CNC AL6061 aluminum case incorporates a diamond-cut aluminum heat sink shell and is water-resistant and waterproof. The servo measures 40x20x38.00mm and weighs 80g without the servo horn, with a 300MM connector wire and JR plug. At 6.0V, operating speed is 0.10sec/60° with 26.0kg-cm/361 oz-in stall torque; at 7.4V, these figures are 0.08sec/60° and 31.0kg-cm/430 oz-in.

Propellers & airframes

Specifications

FlashHobby BLS3837MED specifications
SpecificationValue & conditions
ProductFlashHobby BLS3837MED 37KG BLS Servo
Dimensions40x20x38.00mm
Weight80gWithout servo horn.
GearsSteel gears
Operating speed0.10sec/60°At 6.0V.
Operating speed0.08sec/60°At 7.4V.
Operating speed0.07sec/60°At 8.4V.
Stall torque26.0kg-cm/361 oz-inAt 6.0V.
Stall torque31.0kg-cm/430 oz-inAt 7.4V.
Stall torque37.0kg-cm/514 oz-inAt 8.4V.
Motor typeBrushless motor
Signal typeDigital control
Case materialCNC AL6061 aluminum case
Connector lead300MM wire with JR plug
AmplifierProgrammable PWM digital amplifier
Controller and encoder32-bit MCU with 14-bit magnetic encoder
Gear precisionHigh-precision gear
Operating voltage6.0 ~ 8.4 Volts DC
Output shaft supportDual ball bearings
Output spline25-tooth output spline
Heat sink shellDiamond-cut aluminum heat sink shell
Case water protectionWater-resistant and waterproof case
Compatible modesSanwa SSR, NB4 and Futaba modes
Programmable travel and directionEnd point adjustments and direction
Programmable fail safe and dead bandFail safe and dead band
Programmable speed and startSpeed reduction and soft start rate
Programmable overload protectionOverload protection
Configuration managementData save/load and program reset

Related guides