Product overview
The HEEWING T1 Ranger KIT is an EPP model aircraft intended for recreational flying and model-aircraft enthusiasts. Its compact, twin-motor layout measures 730mm across the wings, 645mm long and 140mm high. The kit weighs 205gram, with a specified takeoff-weight range of 350g to 500gram and minimum speed of 25km/h. Quick disassembly supports transport, while detachable main wings are intended to limit crash damage. The airframe is designed for stable low-speed flight, but the supplied kit requires assembly and separate electronics before operation.
The fuselage provides room to arrange batteries and electronics around the required center of gravity. Front and rear hatches give access to that installation space, and a dedicated front mount accommodates an FPV camera. A revised air intake supports cooling. White and gray foam versions use the same high-density foam construction. The integration provisions allow equipment placement within the airframe, while the kit format leaves propulsion, control electronics and battery installation to the purchaser. Components must be securely fastened and control directions checked before flight.
The supplied package contains one T1 Ranger KIT in the selected color and wheel configuration. Plastic wheel/landing gear is standard, with a red aluminum option. Completion requires a radio and receiver with at least four channels each, motors, speed controllers, propellers, servos, a battery, a suitable charger and the specified quick-release connector assembly. Recommended propulsion equipment comprises two FX-1406-3150KV brushless motors, two FX-20A controllers and FX-3830 propellers. The servo recommendation is three FX-5g units, with FX-7g offered as an alternative.
Specifications
| Specification | Value & conditions |
|---|---|
| Brand and model | HEEWING / Hee Wing RC T1 Ranger KIT |
| Supply format | Unassembled airframe kit without electronics.KIT configuration. |
| Material | EPP |
| Wingspan | 730mm |
| Length | 645mm |
| Height | 140mm |
| Kit weight | 205gramKIT configuration. |
| Takeoff weight | 350g to 500gram |
| Fuselage size | 245m(L) x 51mm(W) x 48mm(H) |
| Minimum speed | 25km/h |
| Package dimensions | 400mm x 230mm x 155mmm |
| Airframe architecture | Compact twin-motor design with disassembly for transport. |
| Assembly and disassembly | Quick-disassembly design; assembly and disassembly for transport in a minute. |
| Low-speed behavior | Designed for stability at low speed. |
| Battery and electronics integration | Internal space accommodates battery and electronics placement for center-of-gravity adjustment. |
| Equipment access | Front and rear hatches support electronics installation and organization. |
| FPV camera provision | Dedicated front FPV camera mount. |
| Foam density | White foam uses the same high-density version as gray foam.White and gray foam versions. |
| Cooling provision | Revised air intake for improved cooling. |
| Main-wing attachment | Easily detachable main wings intended to reduce crash damage. |
| Included airframe | 1x T1 Ranger KIT in the selected color and wheel configuration.Selected color and wheel option. |
| Landing gear | Standard plastic wheel/landing gear; optional red aluminum version.Plastic wheel/landing gear is standard; red aluminum version is optional. |
| Radio and receiver | Radio: minimum 4 channels. Receiver: minimum 4 channels.Required separately; not included. |
| Motors | 2pcs FX-1406-3150KV brushless motors.Recommended equipment; not included. |
| Electronic speed controllers | 2pcs FX-20A.Recommended equipment; not included. |
| Battery | 2-4S 1300mAh - 5000mAh or 450-500gram.Recommended equipment; not included. |
| Propeller | FX-3830.Recommended equipment; not included. |
| Servos | 3pcs FX-5g, or FX-7g.Recommended equipment; not included. |
| Charger | Charger supporting 2-4S LiPo charging.Required separately; not included. |
| Quick-release connector | Quick-release connector with RGB: PCB connector and wires.Required separately; not included. |