ChinaDroneRequest a quote →

Emax Tinyhawk Lite RTF

The EMAX Tinyhawk Lite RTF is an indoor FPV racing drone kit with guarded propellers, ExpressLRS control and analog video. Supplied with an E8 radio, Transporter II goggles, flight battery, charger and spares, it offers three flight modes from self-leveling Beginner to Advanced Acro.

EMAXFPV drones
Flight time
Up to about 8 minutes
Wheelbase
75 mm
Video transmitter
5.8 GHz analog, 40 channels, 0 / 25 / 100 / 400mW; ships at 25mW
Dimensions
104 × 104 × 52 mm

Get a free quote

Product overview

The EMAX Tinyhawk Lite RTF brings indoor FPV flying into a compact quadcopter with a 75mm wheelbase and guards around every propeller. Its HQ 40mm tri-blade propellers accompany an STM32F411 F4 AIO flight controller with an ICM42688 gyro and AT7456E on-screen display. A RunCam Nano 3 analog camera supplies the view through a 5.8GHz, 40-channel video transmitter that ships at 25mW. Betaflight firmware provides Beginner, Intermediate and Advanced flight modes, starting with self-leveling, tilt-limited control for learning.

The kit supplies one drone, an EMAX E8 ExpressLRS radio, Transporter II goggles, one 1S HV 750mAh EM2.0 flight battery and a USB battery charger, plus two CW and two CCW spare propellers and two accessory packs. Flight time reaches up to about 8 minutes per fully charged battery; land when the displayed voltage reaches 3.2V. Use the drone indoors in clear, open spaces away from people and pets, and do not fly in wind, rain or other bad weather. Extra flight batteries are sold separately.

Specifications

Emax Tinyhawk Lite RTF specifications
SpecificationValue & conditions
ProductEMAX Tinyhawk Lite RTF FPV racing drone
Wheelbase75mm
Dimensions104 × 104 × 52mm
Drone weightAbout 37gWithout battery.
PropellersHQ 40mm tri-blade
Flight controllerSTM32F411 F4 AIO, ICM42688 gyro, AT7456E OSD
ESC4-in-1 brushed, 10A, 1S1S.
ReceiverBuilt-in ExpressLRS 2.4GHz (SX1280, SPI)
CameraRunCam Nano 3 (analog)
Video transmitter5.8GHz analog, 40 channels, 0 / 25 / 100 / 400mW; ships at 25mWShips at 25mW.
Flight battery1S HV 750mAh LiPo, EM2.0 connector
Flight timeUp to about 8 minutesPer fully charged battery.
FirmwareBetaflight (EMAX_TINYHAWKF4SX1280), EMAX factory tune
Flight modesBeginner (Angle), Intermediate (Horizon), Advanced (Acro)
E8 radio protocolExpressLRS 2.4GHz (SX1280)
E8 radio channels8
E8 radio output power10 / 25 / 50 / 100mW
E8 radio powerTakes one 18650 Li-ion cell; USB charging
E8 radio portsUSB, 3.5mm trainer jack
E8 radio size and weight150 × 140 × 45mm, 260g without batteryWeight without battery.
E8 radio extrasSimulator support, left/right throttle modes
Transporter II screen4.3 inch, 480 × 272
Transporter II frequency5.8GHz (5658–5945MHz), bands A/B/E/F/R
Transporter II batteryBuilt-in 1300mAh
Transporter II featuresAuto channel search, adjustable brightness, auto power-off
Transporter II weightAbout 398gWith strap and antenna.
Product code0110001162
Kit contents1 Tinyhawk Lite FPV drone; 1 EMAX E8 ExpressLRS 2.4GHz radio controller; 1 EMAX Transporter II FPV goggles; 1 1S HV 750mAh EM2.0 flight battery; 1 USB battery charger; 2 CW and 2 CCW spare propellers; 2 accessory packsIncluded equipment.
Indoor design and propeller protectionDesigned for indoor flying with guarded, ducted propellers and a self-leveling Beginner Mode with limited tilt.
Flight restrictions and landing voltageFly indoors in a clear, open space away from people and pets. Do not fly in wind, rain or other bad weather. Land at a displayed battery voltage of 3.2V. Extra 1S HV 750mAh EM2.0 batteries are sold separately.During flight; battery voltage shown on screen.

Related guides