ChinaDroneRequest a quote →

Emax Tinyhawk Lite BNF

The EMAX Tinyhawk Lite BNF is a compact FPV racing drone for indoor flight training. Guarded propellers, three flight modes, a built-in ExpressLRS 2.4GHz receiver and an analog video system support learning and progression. A flight battery, USB charger, spare propellers and accessory packs are included.

EMAXFPV drones
Flight time
Up to about 8 minutes
Wheelbase
75 mm
Weight
About 37g
Video transmitter
5.8 GHz analog, 40 channels, 0 / 25 / 100 / 400mW
Dimensions
104 × 104 × 52 mm

Get a free quote

Product overview

The EMAX Tinyhawk Lite BNF FPV Racing Drone is built for learning indoor flight in living rooms, garages and other clear, open spaces. Its 75mm wheelbase and 104 × 104 × 52mm dimensions house ducted propellers with a guard around each propeller. Weight is about 37g without the battery. It ships in self-leveling Beginner Mode with limited tilt, while Intermediate and Advanced modes provide progression toward full manual control without angle limits. Do not fly in wind, rain or other bad weather.

The onboard electronics combine an STM32F411 F4 AIO flight controller, ICM42688 gyro, AT7456E OSD and built-in ExpressLRS 2.4GHz receiver. A RunCam Nano 3 analog camera supplies the FPV view through a 5.8GHz, 40-channel video transmitter that ships at 25mW. The package includes one 1S HV 750mAh EM2.0 battery, a USB charger, two CW and two CCW spare propellers, and two accessory packs. An ExpressLRS 2.4GHz radio and analog 5.8GHz goggles are required and are not included; digital-only goggles cannot display its video. Flight time is up to about 8 minutes per fully charged battery; land at an on-screen battery voltage of 3.2V.

Specifications

Emax Tinyhawk Lite BNF specifications
SpecificationValue & conditions
ProductEMAX Tinyhawk Lite BNF FPV Racing Drone
Wheelbase75mm
Dimensions104 × 104 × 52mm
WeightAbout 37gWithout battery.
PropellersHQ 40mm tri-blade
Flight controllerSTM32F411 F4 AIO, ICM42688 gyro, AT7456E OSD
ESC4-in-1 brushed, 10A1S.
ReceiverBuilt-in ExpressLRS 2.4GHz (SX1280, SPI)
CameraRunCam Nano 3 (analog)
Video transmitter5.8GHz analog, 40 channels, 0 / 25 / 100 / 400mWShips at 25mW.
Battery1S HV 750mAh LiPo, EM2.0 connector
Flight timeUp to about 8 minutesPer fully charged battery.
FirmwareBetaflight (EMAX_TINYHAWKF4SX1280), EMAX factory tune
Flight modesBeginner (Angle), Intermediate (Horizon), Advanced (Acro)
Required radioExpressLRS 2.4GHz transmitter; not included
Radio bindingBind using the flight-controller button or Betaflight
Required gogglesAnalog 5.8GHz FPV goggles; not included
Video compatibility limitationDigital-only goggles will not display the videoDigital-only goggles.
Included equipment1 Tinyhawk Lite FPV drone with built-in ELRS 2.4GHz receiver; 1 × 1S HV 750mAh EM2.0 flight battery; 1 USB battery charger; 2 CW + 2 CCW spare propellers; 2 accessory packs
Extra batteriesExtra 1S HV EM2.0 packs are sold separately
Product code0110001161
Propeller protectionA guard surrounds every propeller
Initial flight modeBeginner ModeAs shipped.
Initial video channelR4As shipped.
Operating environmentIndoor flying in clear, open spaces away from people and pets; do not fly in wind, rain or other bad weather
Landing voltageLand at 3.2VWhen the on-screen battery voltage reaches 3.2V.

Related guides