Product overview
The EMAX Tinyhawk Lite Adventure BNF is a micro FPV drone for first-person flying in large indoor rooms and open outdoor spaces on calm days. Its fully covered body places a protective shell around the electronics and accepts a slide-in battery cartridge. A 115mm wheelbase, four 1020 coreless motors and 65mm three-blade propellers form the flight platform. Overall dimensions are 148 × 144 × 45mm, with a weight of about 59g without the battery cartridge. Do not fly in wind, rain or other bad weather.
The EMAX E02 analog camera pairs with a 32-bit open-source analog video transmitter offering 40 channels and 0 / 25 / 100 / 400mW settings; it ships at 25mW on R4. VTX power and channels must follow local rules; higher power levels may require an amateur radio license. The built-in ExpressLRS 2.4GHz SPI receiver requires an ELRS 3.x transmitter, and video requires analog 5.8GHz FPV goggles. Digital-only goggles will not display the video. The STM32F411 flight controller runs at 100MHz with 1S input and programmable RGB LEDs. Betaflight supplies the EMAX factory tune, two PID profiles and Angle, Horizon and Acro modes.
The package includes one drone, one 1S HV 850mAh EM2.0 battery cartridge, one charger, two clockwise and two counterclockwise spare propellers, screw and EM2.0 accessory packs, and card inserts. The radio controller, FPV goggles and USB wall adapter are not included; the charger requires a 5V USB power source. Extra battery cartridges are sold separately. The battery reaches 4.35V when fully charged and provides about 5 minutes of hovering and gentle cruising per full charge in EMAX testing. Start returning when the displayed battery voltage drops to about 3.5V and land by about 3.3V.