ChinaDroneRequest a quote →

EMAX RS2205

The EMAX RS2205 RaceSpec Cooling Series brushless motor is designed for multirotor FPV racing. It combines a ventilated bell, N52 neodymium magnets, Japanese NMB bearings and high-purity copper windings. The 2300kv motor supports 3S-4S input and includes lock nuts and mounting screws for 3mm and 4mm thick frames.

EMAXMotors, ESCs & propellers
KV
2300kv
Maximum thrust
1.024 kg
Weight
Approx. 30g
Input voltage
3S-4S (12.6 - 16.8v)

Get a free quote

Product overview

The EMAX RS2205 RaceSpec Cooling Series is a brushless motor for multirotor FPV racing. Its machined bell fins draw cooling air upward from the motor base and through the coils, increasing ventilation as rotational speed rises and reducing heat soak by at least 30%. The motor combines N52 neodymium magnets, genuine Japanese NMB bearings and high-purity copper windings. Each motor is dynamically balanced at the factory. With a 4S battery and GF5045BN propeller, it produces over 1,000g of thrust.

The 2300kv motor accepts 3S-4S input (12.6 - 16.8v) and weighs approximately 30g with wires. Its 12N14P configuration uses a 22mm-diameter, 5mm-high stator within a motor measuring 27.9mm in diameter and 31.7mm in height. The shaft diameter is 3mm, and the prop adapter has an M5 thread. A 15mm extended prop shaft accommodates virtually any propeller with a 5mm hole. Supplied hardware comprises three lock nuts and two sets of motor screws for 3mm and 4mm thick frames.

Motors & ESCs

Specifications

EMAX RS2205 specifications
SpecificationValue & conditions
Product code0101008001
ModelRS2205
Product type and applicationEMAX RS2205 RaceSpec Cooling Series brushless motor for multirotor FPV racing
KV2300kv
WeightApprox. 30gWith wires.
Wire gauge20AWG
Stator diameter22mm
Stator height5mm
Shaft diameter3mm
Configuration12N14P
Motor diameter27.9mm
Motor height31.7mm
Prop adapter shaft threadM5
Input voltage3S-4S (12.6 - 16.8v)
Maximum thrust1024gKV2300 with HQ5045 BN propeller.
Maximum thrust763gKV2600 with HQ4045 BN propeller.
ThrustOver 1,000g4S with GF5045BN propeller.
Cooling designMachined bell fins draw cool air from the motor base through the coils; airflow increases with rotational speed
Heat soak reductionAt least 30%
MagnetsN52 neodymium magnets
BearingsGenuine Japanese NMB bearings
BalancingEach motor is dynamically balanced at the factory
Extended prop shaft15mm extended prop shaft accommodates virtually any propeller with a 5mm hole
Supplied mounting hardware3 lock nuts and 2 sets of motor screwsFor 3mm and 4mm thick frames.
WindingsHigh-purity copper windings

Related guides