ChinaDroneRequest a quote →
Dualsky CRS3500 MKIV contra rotating motor system with white spinner and exposed belt driveDualsky CRS3500 MKIV contra rotating motor system with white spinner and exposed belt drive

Dualsky CRS3500 MKIV

The Dualsky CRS3500 MKIV is a 3500W maximum contra rotating system for FAI F3A competition aircraft. Hollow shafts, CNC-made transmission components and upgraded motor magnetics combine with active motor cooling. Nearly zero propeller reverse torque supports straight flight, while supplied accessories include a white D82mm CRS Spinner Kit and Mount Kit.

DualskyMotors, ESCs & propellers

Get a free quote

Product overview

The Dualsky CRS3500 MKIV is a contra rotating system for FAI F3A competition, with maximum power of 3500W. Nearly zero propeller reverse torque helps improve model aircraft straightness, while the system offers about 20% higher thrust than DA4 uniaxial systems with lower power consumption. It provides a uniform speed effect during descent and dive routes, together with a wider range of torque variation and more uniform acceleration and deceleration. Both the CRS3500.11 MKIV, item 52411, and CRS3500.13 MKIV, item 52412, weigh 530g.

Construction combines a CNC-made pulley and inclined gears for quiet operation with a lightweight CNC-made gearbox bracket. The main shaft and motor shaft are hollow, and the gear/belt ratio eliminates the belt tensioner mechanism. The MKIV introduces redesigned shafts, gears, pulley, motors, screws and support rods. Its upgraded main shaft bearing increases rated dynamic load Cr by 105% (2100N), while a CNC motor shaft bracket carries a larger bearing. The new belt and gear system improves dynamic load stability and weighs less than the previous generation.

An upgraded magnet and magnetic circuit increase motor torque by about 10% without increasing current, supported by an active cooling motor back cover. Motor power rises by 500W with a whole-system weight increase of 40g. Both propellers have limiting functions, including a front propeller mount limit pin, and the lightweight propeller base increases installation distance by 2mm. The system supports after-firewall F3A installation with the Mount Kit and before-firewall installation for stunt aircraft. Supplied accessories include the white D82mm CRS Spinner Kit and Mount Kit. No added lubricating oil is required; belt replacement is due every 4,000 minutes, approximately 500 flights.

Motors & ESCs

Specifications

Dualsky CRS3500 MKIV specifications
SpecificationValue & conditions
Product type and applicationDualsky CRS3500 MKIV contra rotating system for FAI F3A competition
Maximum power3500W
Propeller reverse torqueNearly zero propeller reverse torque improves model aircraft straightness
Thrust and power consumptionAbout 20% higher thrust with lower power consumptionCompared with DA4 uniaxial systems.
Speed behaviorUniform speed effectDuring descent/dive routes.
Pulley and gearsCNC-made pulley and inclined gears for quiet operation
Gearbox bracketCNC-made lightweight gearbox bracket
Shaft constructionHollow main shaft and motor shaft
Belt tensioning designGear/belt ratio eliminates the belt tensioner mechanism
LubricationMaintenance-free design requiring no added lubricating oil
Belt replacement interval4,000 minutes (about 500 flights)
Installation arrangementsSupports after-firewall installation for F3A and before-firewall installation for stunt model aircraftWith Mount Kit for after-firewall installation.
Redesigned componentsRedesigned main shafts, gear and pulley, motors, screws and support rodsMKIV generation.
Bearing rated dynamic loadRated dynamic load Cr increased by 105% (2100N)Upgraded main shaft bearing.
Propeller limiting featuresFront propeller mount limit pin; limiting functions on both front and rear propellers
Motor shaft supportCNC motor shaft bracket with larger bearing
Belt and gear systemImproved dynamic load stability and lower weightCompared with the previous generation.
Propeller base and installation distanceLightweight propeller base with installation distance increased by 2mmNewly designed propeller base.
Motor magnetic design and torqueUpgraded magnet and magnetic circuit; torque increased by about 10%Without increasing current.
Motor coolingActive cooling motor back cover
Power and weight increasesMotor power increased by 500W; whole-system weight increased by 40gMKIV generation upgrade.
Torque and acceleration characteristicsWider torque variation range and more uniform acceleration and deceleration
Supplied equipmentCRS Spinner Kit (D82mm, white) and Mount KitIncluded accessories.
Item number and weightItem 52411; 530gCRS3500.11 MKIV variant.
Item number and weightItem 52412; 530gCRS3500.13 MKIV variant.

Related guides