Product overview
The DolphinRC 500-560MHz Micro TX RX offers TX and RX options for an ExpressLRS-based RC link. Its hardware uses a newly selected RF chip with redesigned circuitry and firmware. The RX400 Nano receiver measures 12mm*19mm and weighs 0.7g for the receiver alone. It operates from 5V, provides 17dBm telemetry power and uses an IPEX MHF 1 antenna connector. Receiver-to-flight-controller communication uses CRSF. Optional telemetry uses transmission slots and reduces the stick update rate. The default frequency version covers 500-560MHz; customizable versions cover 370-560MHz with 20-60MHz bandwidth.
The Micro TX module fits radio transmitters with a micro module bay, also called JR or SLIM, and requires CRSF output from the radio. It provides D50Hz/25Hz/50Hz/100Hz/100Hz Full/200Hz packet refresh settings and 100mW/250mW/500mW/1000mW output settings. Connections include an SMA antenna connector, Type-C USB port and XT30 external power input. Input voltage is 7V~13V, while the XT30 supply range is 7-25V(2-4S). Consumption is 0.55A at 10V with 1000mW output, 200Hz and 1:128; fan voltage is 5V.
Install the transmitter antenna before power-on to prevent permanent PA chip damage. A 6S or higher battery permanently damages the module’s power supply chip. When the radio or external battery voltage is low, output settings of 500mW or above can cause rebooting, disconnection and loss of control. Receiver LEDs indicate connection, binding, connection failure and Wi-Fi upgrade status. Matching custom Binding Phrases enable automatic binding. The transmitter’s 5-D button adjusts parameters; after a Wi-Fi firmware upgrade, the module requires a power-off and restart.

