Product overview
The DarwinFPV CineApe 25 FPV Kit RTF provides an analog FPV aircraft and its accompanying control, viewing and charging equipment for indoor and outdoor practice. Its ducted architecture incorporates a high-strength, one-piece injection-molded propeller guard intended to resist impacts during drops and shocks. A 1504-3600KV motor specification accompanies endurance of up to nine minutes. An external Type-C port provides access for parameter adjustment, while the guarded layout makes this a platform suited to learning and practice sessions.
The supplied configuration includes one CineApe 25 analog drone, a TX12 Mark II ELRS controller, VR009 dual-antenna 3-inch 5.8GHz 40-channel goggles, two 4S 850mAh 15.2V batteries and a Hotrc A400 balance charger. Battery straps, EVA protective foam, a bottom shock-absorbing pad, spare screws, a sticker and a manual round out the kit. GPS integration for rescue-mode use requires an available flight-controller serial port. A 3S 2200mAh battery is discouraged because its weight is excessive for this aircraft.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | DarwinFPV CineApe 25 FPV Kit RTF |
| Supplied flight platform | 1 × CineApe 25 Analog FPV Drone in an RTF kit |
| Intended use | Indoor and outdoor FPV practice for beginners and experienced pilots |
| Propeller guard construction | High-strength, one-piece injection-molded propeller guard |
| Aerodynamic architecture | Ducted aerodynamic design |
| Motor specification | 1504-3600KV |
| Flight endurance | Up to 9minsEquipped with the 1504-3600KV motor. |
| Parameter adjustment interface | External Type-C port for parameter adjustment |
| Included radio controller | 1 × TX12 Mark II ELRS Radio Controller |
| Included FPV goggles | 1 × Mini 3 Inches 5.8GHZ 40CH FPV Goggles |
| Goggles model and reception | VR009 with dual-antenna reception |
| Goggles latency | As low as 10msVR009 5.8G dual-antenna 40CH 3-inch goggles. |
| Included batteries | 2 × DarwinFPV 4S 850mAh 15.2V batteries |
| Included charger | 1 × Hotrc A400 Balance Charger |
| Included battery straps | 2 × battery straps, 10x170mm |
| Included protective foam | 1 × EVA crashproof foam |
| Included bottom pad | 1 × EVA bottom plate shock absorbing pad |
| Included spare hardware | 1 × spare screw kit |
| Included sticker | 1 × sticker |
| Included documentation | 1 × user manual |
| GPS integration | GPS can be added for rescue-mode useFlight controller must have an available serial port. |
| Battery configuration limitation | 3s 2200mah battery use is not recommended because of excessive weightUsing a 3s 2200mah battery. |