ChinaDrone.Request a quote ↗
COMMERCIAL AIRCRAFT

DAMODA L3

By DAMODA ↗

The DAMODA L3 is a drone-show system with modular aircraft, nest-based takeoff and landing, RTK positioning and optional firework mounting. It supports timecode synchronization and mixed-model flights. Its 3000mAh battery capacity can expand to 5000mAh, while recommended show duration depends on battery configuration and payload. Firework mounting accessories are purchased separately.

Request a quote ↗
Recommended show duration without payload15min; 5000mAh extended-endurance version: 22minWithout payload; 22min applies to the 5000mAh extended-endurance version.
Hover endurance≤32min; 5000mAh extended-endurance version: ≤42minSingle aircraft without payload; extended-endurance value applies to the 5000mAh version.
Aircraft dimensions320mm × 320mm × 115mm
Weight530g; 5000mAh extended-endurance version: 596g596g applies to the 5000mAh extended-endurance version.
Maximum wind resistanceLevel 5
Firework mountingSupported; payload approximately 80gMounting accessories must be purchased separately.

Product overview

The DAMODA L3 combines a modular aircraft design with nest-based takeoff and landing for drone shows. Each nest case accommodates 10 aircraft and can be carried by one person. Aircraft dimensions are 320mm × 320mm × 115mm, with weight listed as 530g or 596g for the 5000mAh extended-endurance version. Battery capacity is 3000mAh, expandable to 5000mAh. Batteries use manual press-in replacement and charge by insertion into a charger. Infrared remote control supports batch power-on.

Show integration includes RTK positioning with GPS, BDS and GLONASS support, plus timecode operation for millisecond-level synchronization of sound, visuals and lighting. The L3 supports mixed-model flights and takeoff and landing at different locations. Firework mounting supports horizontal, vertical and other angles; accessories require separate purchase, and the stated payload is approximately 80g. Recommended show duration is 15min without payload, increasing to 22min for the 5000mAh version, while an 80g firework payload has a recommended duration of 8min–12min. Operation below 0°C requires preheating.

Specifications

SpecificationValue & conditions
Aircraft dimensions320mm × 320mm × 115mm
Weight530g; 5000mAh extended-endurance version: 596g596g applies to the 5000mAh extended-endurance version.
Maximum wind resistanceLevel 5
Firework mountingSupported; payload approximately 80gMounting accessories must be purchased separately.
Positioning methodRTK, supporting GPS + BDS + GLONASS
Positioning accuracy8 mm horizontal; 15 mm vertical
Battery installationManual press-in battery replacement
Charging methodInsert into charger
Power-on methodBatch power-on using infrared remote control
Battery capacity3000mAh, expandable to 5000mAh
Aircraft nest capacity10 aircraftPer case.
Hover endurance≤32min; 5000mAh extended-endurance version: ≤42minSingle aircraft without payload; extended-endurance value applies to the 5000mAh version.
Recommended show duration without payload15min; 5000mAh extended-endurance version: 22minWithout payload; 22min applies to the 5000mAh extended-endurance version.
Recommended show duration with fireworks8min–12minWith an 80g firework payload.
Minimum flight spacing1.4m; 1.2m under extreme conditions1.2m is achievable under extreme conditions.
Show light24W supported; maximum power 40W
Site area requirement250m²/1000 aircraftFor 1000 aircraft.
Maximum show speed10m/sDuring a show.
Communication distanceRadio and remote controller: 1Km; Wi-Fi: 500m
Operating temperature-15°C to 45°CPreheating is required below 0°C.
Remote identification and safety requirementsBuilt-in Remote ID; conforms to Safety Requirements for Civil Unmanned Aircraft Systems
Firework mounting anglesHorizontal, vertical and other angles supportedWith a firework device mounted.
Show synchronizationMillisecond-level synchronization of sound, visuals and lightingMultiple systems connected through timecode.
Simultaneous fleet operationSupports simultaneous flight at a scale of ten thousand aircraft
Fleet arrangementsSupports takeoff and landing at different locations and mixed-model flights
Physical design and handlingModular design; nest-based takeoff and landing; nest can be carried by one person; quick battery replacement
SOURCE WITH CHINADRONE

Request a quote for DAMODA L3

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Drone shows

HighGreat HG-B03-2025

By HighGreat

The HighGreat EMO Plus (model HG-B03-2025) is a formation-show drone for coordinated light displays. It weighs 570 g, has a 232 mm wheelbase and uses dual-frequency multi-constellation RTK positioning. Its light has adjustable power from 0 to 20 W and reaches 840 lm. It also accepts flower-scatter, cold firework tube and strobe light mounts.

EFY AGILE BEE II white quadcopter with four propellers, landing skids, and an illuminated underside light.
Drone shows

EFY AGILE BEE II

By EFY

The EFY AGILE BEE II is a show drone for medium-scale performances and urban sites with limited launch space. It has a 350 mm wheelbase, weighs 1,450 g and supports KONGMING modules, with a maximum load of 300 g and maximum endurance of 36 min.

HighGreat TAKE formation quadcopter with an illuminated blue underside light.
Drone shows

HighGreat TAKE

By HighGreat

HighGreat TAKE is a foldable formation aircraft with adjustable full-color lighting and RTK positioning, offered in sets with configurable aircraft quantities. It accommodates modifications incorporating lamps, fireworks or decorations. Listed parameter values vary with external environment, usage and firmware version; actual experience governs.