Product overview
The CNHL Speedy Pizza Series V2.0 is a LiPo battery intended to power compatible FPV drones and RC models. Its four-cell 4S1P configuration provides 14.8V and 1200mAh capacity, with discharge ratings of 120C continuous and 240C burst. Charging is limited to 5C maximum. The supplied item is the battery with an XT60 plug, offered in quantities of two or four packs. Integration requires the installation’s voltage and plug to match the battery; those requirements apply when selecting it for an RC model.
For installation space and mass planning, the pack measures 32 × 34 × 78mm with a stated 1–5mm dimensional difference, and weighs approximately 152g with a ±5g tolerance. Its connections comprise an XT60 output connector, JST / XH balance connector and 12 AWG wire. Charging must stop immediately at 4.2V per cell, with normal cell voltage specified as 3.7V–4.2V. Before use, inspect the battery surface and check that voltage is normal. A new pack that fails to retain charge calls for several charging cycles with a balance charger.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | CNHL Speedy Pizza Series V2.0 1200mAh 14.8V 4S 120C LiPo Battery with XT60 Plug |
| Stock number | 1201204PZ |
| Capacity | 1200mAh |
| Voltage and cell configuration | 14.8V / 4-Cell / 4S1P |
| Continuous discharge rate | 120CContinuous discharge. |
| Burst discharge rate | 240CBurst discharge. |
| Maximum charge rate | 5C Max |
| Dimensions | 32 × 34 × 78mm1–5mm dimensional difference. |
| Approximate weight | Approximately 152g±5g. |
| Output connector | XT60 |
| Balance connector | JST / XH |
| Wire gauge | 12# AWG |
| Included equipment | CNHL 1200mAh 14.8V 4S 120C LiPo battery with XT60 plug |
| Pack quantity options | 2 packs or 4 packs |
| RC integration requirement | The RC installation must match the battery voltage and plug.Matching voltage and plug. |
| Charge stopping threshold | Stop charging immediately at 4.2V per cell.During charging. |
| Cell voltage range | 3.7V–4.2VNormal cell voltage. |
| Battery inspection | Check the battery surface and confirm normal voltage before use.Before use. |
| Initial charging guidance | Use a balance charger to charge and cycle the battery several times first.If a new battery will not hold a full charge or loses charge very quickly. |
Request a quote for CNHL Speedy Pizza Series V2.0 1200mAh 14.8V 4S 120C Lipo Battery with XT60 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
