Product overview
The CNHL Speedy Pizza Series 2200mAh 22.2V 6S 120C LiPo Battery with XT60 Plug supplies energy for compatible performance FPV drones, electric RC helicopters and other weight-sensitive 6S aircraft. Its cells form a long, low-profile pack measuring 117 × 38 × 36mm, with an approximate finished weight of 315g. This layout provides an option for installations constrained by battery height or canopy clearance, while a suitable helicopter tray can allow fore-and-aft positioning to adjust the aircraft’s center of gravity.
The pack combines 48.84Wh nominal energy with an XT60 output connector and 12AWG main wiring. Installation requires sufficient tray or frame space, secure retention, suitable weight distribution and electronics that accept 25.2V at full charge. Its 120C discharge rating does not determine actual aircraft current, which depends on the complete propulsion system and operating load. Charging requires a compatible balance charger configured for standard 6S LiPo chemistry, with a maximum of 4.20V per cell; balanced 1C charging is preferred for routine use, and LiHV mode must not be used.
Specifications
| Specification | Value & conditions |
|---|---|
| Series | CNHL Speedy Pizza Series |
| Capacity | 2200mAh |
| Nominal voltage | 22.2V |
| Cell count | 6S |
| Nominal energy | 48.84Wh |
| Fully charged voltage | 25.2V / 4.20V per CellFully charged. |
| Discharge rating | 120C |
| Output connector | XT60 Plug |
| Dimensions (L × W × H) | 117 × 38 × 36mm / 4.61 × 1.50 × 1.42in |
| Approximate weight | 315g / 0.69lbFinished pack; approximate weight. |
| Main wire | 12AWG |
| Stock number | 2201206PZ |
| Product identity and intended use | CNHL Speedy Pizza Series 2200mAh 22.2V 6S 120C LiPo Battery with XT60 Plug; intended for performance FPV drones, RC helicopters and other weight-sensitive 6S aircraft. |
| Physical architecture and positioning | Long, low-profile cell arrangement retaining 2200mAh capacity.Where the battery tray permits fore-and-aft adjustment. |
| Integration requirements | Match voltage, connector, dimensions, weight, retention and power-system requirements; verify final center of gravity in the installed position.Aircraft installation. |
| Charging requirements | Use a compatible balance charger in 6S LiPo mode; balanced 1C preferred for routine charging; do not use 4.35V-per-cell LiHV mode.Standard 6S LiPo charging. |
| Current-demand limitation | Actual current depends on the motor, ESC, gearing, rotor or propeller load, aircraft weight and flying style.During aircraft operation. |
| Handling dependencies | Handling depends on frame geometry, motors, propellers, accessories and total takeoff weight.Installed in an FPV aircraft. |
Request a quote for CNHL Speedy Pizza Series 2200mAh 22.2V 6S 120C LiPo Battery with XT60 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
