Product overview
The CNHL Speedy Pizza Series 2200mAh 14.8V 4S 120C LiPo Battery with XT60 Plug supplies power for compatible FPV drones, electric RC helicopters and fixed-wing aircraft. Its configuration combines 2200mAh capacity, 32.56Wh nominal energy, an XT60 output connector and 12AWG main wiring. The 120C discharge rating suits demanding 4S power-system applications, while actual current draw depends on the motor, speed controller, propeller or rotor load, gearing, aircraft weight and flying style. Aircraft selection therefore needs to account for the complete power system.
The cells form a long, low-profile pack measuring approximately 117 × 38 × 25mm in length, width and height, with an approximate finished weight of 221g. This geometry provides an integration option where vertical clearance is limited, including helicopter trays and installations beneath a canopy. On compatible FPV frames, its 25mm height can position top-mounted battery mass closer to the frame. Fore-and-aft positioning can help adjust balance where the tray permits movement; the mounting arrangement must accommodate the footprint, retain the pack securely and establish the required center of gravity.
Charging requires a compatible balance charger configured for standard LiPo chemistry and four cells. Maximum balanced charge voltage is 16.8V total, or 4.20V per cell; 4.35V-per-cell LiHV charging must not be used. A balanced 1C rate is preferred for routine charging. Integration also requires electronics that support the fully charged voltage, an XT60-compatible connection and suitable weight capacity. Use in an aircraft intended for 3S requires explicit manufacturer support for 4S operation. For helicopters, both tray fit and canopy clearance matter; fixed-wing installations must meet the aircraft's recommended voltage, capacity and weight range.
Specifications
| Specification | Value & conditions |
|---|---|
| Series | CNHL Speedy Pizza Series |
| Capacity | 2200mAh |
| Nominal Voltage | 14.8V |
| Cell Count | 4S |
| Nominal Energy | 32.56Wh |
| Fully Charged Voltage | 16.8V / 4.20V per CellFully charged. |
| Discharge Rating | 120C |
| Output Connector | XT60 Plug |
| Dimensions (L × W × H) | 117 × 38 × 25mm / 4.61 × 1.50 × 0.98inApproximate dimensions, in length × width × height order. |
| Approx. Weight | 221g / 0.49lbApproximate finished-pack weight. |
| Main Wire | 12AWG |
| Stock Number | 2201204PZ |
| Product Type and Purpose | LiPo battery pack for compatible FPV drones, RC helicopters and other 4S aircraft.Compatible 4S aircraft with suitable battery fit and power requirements. |
| Physical Architecture | Cells arranged in a long, low-profile package. |
| Pack-Level Energy Density | Roughly 147Wh/kgComplete finished battery; approximate weight of 221g. |
| Charging Requirements | Balanced 1C charging preferred; do not use 4.35V-per-cell LiHV mode.Routine balanced charging with a compatible charger set to LiPo chemistry and 4S. |
| Integration Requirements | Match dimensions, weight, retention and power-system requirements, and verify final center of gravity.Installed in the aircraft's actual flight position. |
| Higher-Voltage Compatibility Limitation | Permitted only when the aircraft manufacturer explicitly supports 4S operation.Use in an aircraft originally intended for 3S. |
| Current Draw Qualification | Actual current depends on the motor, ESC, propeller or rotor load, gearing, aircraft weight and flying style.Aircraft operation. |
Request a quote for CNHL Speedy Pizza Series 2200mAh 14.8V 4S 120C LiPo Battery with XT60 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
