Product overview
The CNHL Speedy Pizza Series 2200mAh 11.1V 3S 120C LiPo Battery with XT60 Plug supplies electrical power for compatible RC airplanes, fixed-wing models and FPV builds. Its cells occupy a long, flat package approximately 117 × 38 × 20mm, with a finished weight of approximately 176g. This low profile suits shallow battery compartments and limited hatch clearance. The pack combines 24.42Wh nominal energy with an XT60 output connector and 12AWG main wiring, defining its electrical connection and installation requirements.
Installation must accommodate the pack plus its main wires, balance lead, connector and retaining straps. In a suitable fixed-wing compartment, the long shape may allow fore-and-aft positioning for balance adjustment, while requiring full support, secure retention and the aircraft's specified center-of-gravity range. Compatibility also depends on capacity, weight and the complete power system. Charging requires a compatible balance charger set for standard 3S LiPo chemistry, reaching no more than 12.6V total; balanced 1C charging is preferred, and 4.35V-per-cell LiHV mode must not be used.
Specifications
| Specification | Value & conditions |
|---|---|
| Series | CNHL Speedy Pizza Series |
| Capacity | 2200mAh |
| Nominal voltage | 11.1V |
| Cell count | 3S |
| Nominal energy | 24.42Wh |
| Fully charged voltage | 12.6V / 4.20V per CellFully charged. |
| Discharge rating | 120C |
| Output connector | XT60 Plug |
| Dimensions | 117 × 38 × 20mm / 4.61 × 1.50 × 0.79inLength × width × height; approximately. |
| Weight | 176g / 0.39lbApproximate finished-pack weight. |
| Main wire | 12AWG |
| Stock number | 2201203PZ |
| Product type and purpose | CNHL 3S LiPo battery pack for RC airplanes, fixed-wing models and compatible FPV builds.Compatible aircraft and FPV builds. |
| Physical architecture | Cells arranged in a longer, flatter package. |
| Approximate gravimetric energy density | Approximately 139Wh/kgComplete pack, including cells, wiring, connector and outer construction; calculated from stated energy and weight. |
| Additional integration clearance | Additional room required for main wires, balance lead, XT60 connector and battery straps.Installed battery compartment. |
| Retention and balance requirements | Fully support and securely retain the pack; final balance must remain within the aircraft manufacturer's specified CG range.Compatible fixed-wing battery compartment. |
| Charging configuration | Use a compatible balance charger in LiPo 3S mode; balanced 1C charging is preferred for routine use. Do not use 4.35V-per-cell LiHV mode.Standard 3S LiPo charging. |
| Compatibility requirements | Compatibility requires matching dimensions, capacity, weight, retention and power-system requirements as well as voltage and connector.Aircraft installation. |
| Discharge-rating limitation | 120C denotes the discharge rating; actual current depends on motor, ESC, propeller, aircraft weight, throttle use and complete power-system setup.Operating power system. |
Request a quote for CNHL Speedy Pizza Series 2200mAh 11.1V 3S 120C LiPo Battery with XT60 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
