ChinaDrone.Request a quote ↗
COMPONENT

CNHL Lightning LiHV 750mAh 15.2V 4S 120C HV LiPo Battery with XT30 Plug

By CNHL ↗

The CNHL Lightning LiHV 750mAh 15.2V 4S 120C HV LiPo Battery with XT30 Plug is a compact power pack for suitable FPV drones and cinewhoops. It combines a 4S1P architecture with XT30 output and a separate balance connector. Integration depends on electrical compatibility, mounting space, weight and frame balance.

Request a quote ↗
CNHL Lightning LiHV 750mAh 15.2V 4S 120C battery with red and black leads and a yellow XT30 plug
CNHL Lightning LiHV 750mAh 15.2V 4S 120C battery with red and black leads and a yellow XT30 plug
Listed configuration750mAh, 15.2V, 4S, 120C, XT30Lightning LiHV variant; drone-build compatibility must be checked before ordering
Capacity750mAh
Voltage and cell configuration15.2V / 4S / 4S1P LiHV
Discharge rate120C Continuous / 240C Burst
Output connectorXT30 Plug
Dimensions (L×W×H)79 × 20 × 29 mm (±1–5 mm)

Product overview

The CNHL Lightning LiHV 750mAh 15.2V 4S 120C HV LiPo Battery with XT30 Plug supplies power for compact FPV aircraft, including suitable 2.5-inch to 3-inch cinewhoops and small freestyle builds. Its 4S1P LiHV configuration combines a 750mAh capacity with discharge ratings of 120C continuous and 240C burst. The pack incorporates an XT30 output plug, a JST-XHP-5P balance connector and 16 AWG wiring. These interfaces and its electrical configuration define the principal requirements for integration into a drone.

The pack measures 79 × 20 × 29 mm in length, width and height, with a stated dimensional tolerance of ±1–5 mm, and weighs approximately 79 g (±5 g). Installation requires sufficient battery tray length and strap clearance, together with a suitable total flying weight and frame balance. Charging requires a charger supporting 4S LiHV batteries, with a maximum charge rate of 5C and charging stopped at 4.35V per cell. Typical operating voltage is 3.8V–4.35V per cell.

Specifications

SpecificationValue & conditions
Listed configuration750mAh, 15.2V, 4S, 120C, XT30Lightning LiHV variant; drone-build compatibility must be checked before ordering
Capacity750mAh
Voltage and cell configuration15.2V / 4S / 4S1P LiHV
Discharge rate120C Continuous / 240C Burst
Output connectorXT30 Plug
Dimensions (L×W×H)79 × 20 × 29 mm (±1–5 mm)
WeightApprox. 79 g (±5 g)
Maximum charge rate5C Max
Balance connectorJST-XHP-5P
Wire gauge16 AWG
Stock numberHV751204
Intended applicationsBattery power for compact FPV drones, including 2.5-inch to 3-inch cinewhoops and small freestyle builds.Compact FPV builds using a 4S XT30 setup.
Physical and electrical integration requirementsConnector type, battery tray length, strap clearance, all-up weight target and frame balance must suit the pack.Installation in a drone.
Cell charging limitStop charging at 4.35V per cell.During charging.
Typical operating cell voltageTypically 3.8V–4.35V per cell.Normal operation.
Charger requirementRequires a charger supporting 4S LiHV batteries.Charging this 4S LiHV battery.
SOURCE WITH CHINADRONE

Request a quote for CNHL Lightning LiHV 750mAh 15.2V 4S 120C HV LiPo Battery with XT30 Plug

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗