Product overview
The CNHL Lightning LiHV 750mAh 11.4V 3S 120C Battery with XT30 Plug supplies power for compact CineWhoops, micro FPV aircraft and small freestyle builds. Its lithium-polymer construction uses a 3S1P cell arrangement, with 16AWG wiring, an XT30 output plug and a JST-XH 4-pin balance connector. The long, narrow 78 × 21 × 22mm case suits constrained battery channels and forward-loading compartments. At approximately 61g, installation depends on sufficient mounting space, secure retention and acceptable aircraft balance.
Electrical integration requires a power system that accepts the selected charging voltage. Full LiHV charging reaches 13.05V, or 4.35V per cell; the standard LiPo limit is 12.60V, or 4.20V per cell, with less available energy. Discharge ratings are 120C continuous and 240C burst, while 5C is the maximum charge rate. The case dimensions may vary by approximately 1–5mm and weight by approximately ±5g, so mounting allowances matter. Power and balance leads must remain clear of moving parts.
Specifications
| Specification | Value & conditions |
|---|---|
| Battery configuration and intended use | 750mAh, 11.4V, 3S, XT30 plug; compact 3S CineWhoops.Lightning LiHV 750mAh XT30 variant described in the collection listing. |
| Charger requirement | LiHV-capable chargerFor the collection's 11.4V 3S LiHV batteries. |
| Capacity | 750mAh |
| Nominal voltage | 11.4V |
| Battery chemistry | LiHV Lithium Polymer |
| Cell configuration | 3S1P |
| Fully charged voltage | 13.05V in LiHV Mode / 12.60V at Standard LiPo LimitLiHV mode or standard LiPo charge limit, respectively. |
| Discharge rate | 120C Continuous / 240C BurstContinuous discharge or burst discharge, respectively. |
| Maximum charge rate | 5CMaximum charge rate. |
| Output connector | XT30 Plug |
| Balance connector | JST-XH 4-Pin |
| Dimensions | 78 × 21 × 22mmLength × width × height. |
| Weight | 61gApproximate weight. |
| Wire gauge | 16AWG |
| Stock number | HV751203 |
| Size and weight tolerances | Dimensions may vary by approximately 1–5mm; weight tolerance approximately ±5g.Approximate dimensional variation and weight tolerance. |
| Intended application | Battery for compact 3S CineWhoops, micro FPV drones, small freestyle builds and other RC models.Compatible aircraft accepting the battery's dimensions, weight and electrical requirements. |
| Per-cell charging limits | Maximum 4.35V per cell using dedicated 3S LiHV balance charging; 13.05V fully charged.Full LiHV charging requires complete aircraft power-system support for the resulting voltage. |
| Standard LiPo charging option | Charge to 4.20V per cell; reduced maximum voltage and available energy.Where full LiHV voltage has not been approved. |
| Connector integration | Supplied XT30 output plug connects to a corresponding XT30 device-side connector.Direct connection requires matching XT30 connectors with correct polarity and orientation. |
| Mounting clearance | Requires 3S operation and secure mounting without obstructing ducts, camera mount, GPS, receiver antenna or other equipment.Aircraft installation must accommodate the battery securely. |
Request a quote for CNHL Lightning LiHV 750mAh 11.4V 3S 120C Battery with XT30 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
