Product overview
The CNHL Lightning LiHV 7200mAh 15.2V 4S 120C Battery with XT90 Plug supplies electrical power for demanding RC installations, including airplanes, EDF jets, helicopters, boats, and 1/8 scale cars and trucks. Its configuration combines a 4S LiHV pack with an XT90 output connector, 10 AWG wiring, and a JST-XHP-5P balance connector. Capacity is 7200mAh, with discharge ratings of 120C continuous and 240C burst. This is a battery component for integration into a compatible electric platform.
Installation must accommodate a 149 × 51 × 37 mm pack weighing approximately 556g. The separate approximate 145 × 48 × 34 mm tray guidance is smaller than those pack dimensions, creating a material fit discrepancy. Electrical integration requires compatible voltage and connectors in a 4S LiPo/LiHV system. Charging requires a LiHV-compatible balance charger, with a maximum charge rate of 5C and a ceiling of 4.35V per cell. Inspect the battery before first use.
Specifications
| Specification | Value & conditions |
|---|---|
| Model identification | Lightning LiHV 7200mAh 15.2V 4S 120C with XT90The documented 4S XT90 variant. |
| Maximum charge voltage | 4.35V per cellDo not exceed this voltage; use compatible voltage and connectors. |
| Capacity | 7200mAh |
| Voltage and cell configuration | 15.2V / 4S LiHV |
| Discharge rate | 120C Continuous / 240C BurstContinuous / burst discharge. |
| Output connector | XT90 |
| Dimensions | 149 × 51 × 37 mmLength × width × height. |
| Weight | Approx. 556g |
| Charge rate | 5C MaxMaximum charge rate. |
| Balance connector | JST-XHP-5P |
| Wire gauge | 10 AWG |
| Stock number | HV7201204XT90 |
| System compatibility | 4S LiPo / LiHV compatible system; voltage and connector compatibility required before use.Requires a 4S LiPo / LiHV compatible system. |
| Battery tray guidance | Approx 145 × 48 × 34 mm battery tray; this is smaller than the specified 149 × 51 × 37 mm pack dimensions.Quick-fit battery tray guidance. |
| Charging equipment and voltage limit | LiHV-compatible balance charger capable of 4.35V per cell; do not charge above 4.35V per cell.Use a LiHV-compatible balance charger. |
| Intended applications | 1/8 scale RC cars and trucks, RC airplanes and EDF jets, RC helicopters, RC boats, and high-power electric RC platforms. |
| Initial battery preparation | Inspect before first use. If it initially does not hold charge, cycle it several times using a balance charger.Before first use; balance-charger cycling applies if the battery initially does not hold charge. |
Request a quote for CNHL Lightning LiHV 7200mAh 15.2V 4S 120C Battery with XT90 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
