Product overview
The CNHL Black Series 5000mAh 22.2V 6S 65C Battery with XT90 is a lithium-polymer energy pack for larger electric RC equipment and selected FPV installations. Its intended applications include 90mm EDF jets, sport aircraft, 600–700 size electric helicopters, large RC boats, and suitable large multirotors. For UAV installations, it targets larger 6S platforms, including 7-inch cruising and cinematic long-range builds where capacity matters more than minimum battery weight. The product is a battery component rather than a complete aircraft.
The six-cell pack measures 146 × 51 × 56 mm in length, width, and height and weighs approximately 790g. Its supplied electrical configuration comprises an XT90 output connector, a JST-XH balance connector, and 10 AWG wiring. Integration requires matching the platform’s voltage, connector, available space, and acceptable battery weight. On larger FPV aircraft, battery dimensions, strap fit, plug type, and final takeoff weight require attention alongside center of gravity and mounting security. The pack is too heavy for most 5-inch freestyle drones.
Discharge ratings are 65C continuous and 130C burst, with a maximum charge rate of 5C. Charging must stop when each cell reaches 4.2V. Any adapter must be high quality and appropriate for the current load. Before first use, inspect the battery surface and voltage; if initial performance is incomplete, perform several balance charge cycles. These electrical limits and handling requirements accompany the pack’s capacity-focused role, while its dimensions and approximate 790g mass remain material constraints when selecting an aircraft installation.
Specifications
| Specification | Value & conditions |
|---|---|
| Listed battery variant and application | 5000mAh, 22.2V, 6S, 65C, XT90; 6–7-inch rigs carrying GoPro or Insta360 cameras.Source describes the intended rig size and camera payload. |
| Product identity and type | CNHL Black Series 5000mAh 22.2V 6S 65C Battery with XT90; lithium-polymer battery pack. |
| Capacity | 5000mAh |
| Voltage and cell configuration | 22.2V / 6S / 6 Cell |
| Discharge rate | 65C Continuous / 130C BurstContinuous discharge / burst discharge. |
| Output connector | XT90 |
| Dimensions | 146 × 51 × 56 mmLength × width × height. |
| Weight | Approx. 790g |
| Charge rate | 5C MaxMaximum charge rate. |
| Balance connector | JST-XH |
| Wire gauge | 10 AWG |
| Stock number | 500656BKZ |
| Applications | 90mm EDF jets and sport aircraft; 600–700 size electric helicopters; large RC boats and high-power electric platforms; 7-inch FPV cruising or cinematic long-range builds; suitable large multirotors.For large multirotors where 6S 5000mAh capacity is appropriate. |
| FPV weight limitation | Too heavy for most 5-inch freestyle drones.For most 5-inch freestyle drones. |
| Electrical and physical integration | Compatibility depends on matching voltage, connector, dimensions, and acceptable weight. |
| Mounting and aircraft integration | Check battery dimensions, strap fit, plug type, and final takeoff weight; account for battery weight, center of gravity, connector resistance, and mounting security.Before flying larger FPV drones. |
| Cell charging limit | Stop charging when each cell reaches 4.2V.During charging. |
| Adapter requirements | Adapters must be high quality and appropriate for the current load.When using adapters. |
| Initial inspection | Inspect the battery surface and voltage.Before first use. |
| Initial balance charging | Perform several balance charge cycles.If the battery does not reach full performance initially. |
Request a quote for CNHL Black Series 5000mAh 22.2V 6S 65C Battery with XT90
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
