ChinaDroneRequest a quote →

CNHL Bison XT STOL 1750mm Prop – Replacement Propeller 18×6

The CNHL Bison XT STOL 1750mm Prop – Replacement Propeller 18×6 is the original factory replacement for the Bison XT STOL series. Supplied as an OEM replacement propeller, it supports repairs after damage from gravel, tip strikes or rough landings.

CNHLDrone propeller
Size
18×6

Get a free quote

Product overview

The CNHL Bison XT STOL 1750mm Prop is an 18×6 OEM replacement propeller for the Bison XT STOL series, identified by stock number OZBN007. This original factory replacement serves repairs following propeller damage from gravel, a tip strike or a rough landing. Replacing a damaged propeller can help restore smooth throttle response and reduce vibration.

Disconnect the battery before working near the propeller. After fitting the replacement, perform a short low-throttle test for vibration. If unusual vibration occurs, stop and re-check the propeller seating, nut tightness and blade condition.

Motors & ESCs

Specifications

CNHL Bison XT STOL 1750mm Prop – Replacement Propeller 18×6 specifications
SpecificationValue & conditions
Product identityCNHL Bison XT STOL 1750mm Prop – Replacement Propeller 18×6
Stock numberOZBN007
Size18×6
Product typeOEM replacement propeller; not an aftermarket upgrade
ApplicationOriginal factory replacement propeller for the CNHL Bison XT STOL series
Battery disconnectionAlways disconnect the battery.Before working near the propeller.
Installation testPerform a short low-throttle vibration test. If unusual vibration occurs, stop and re-check seating, nut tightness, and blade condition.After installation.

Related guides