Product overview
The CNHL MiniStar package supplies four 850mAh LiPo batteries for 150- and 180-size FPV multirotors, including micro FPV racing drones. Each battery has a three-cell 3S1P configuration rated at 11.1V, an XT60 output connector and a JST / XH balance connector. Each pack measures 25 × 30 × 62mm, with a stated dimensional difference of 1–5mm, and weighs approximately 86g with a ±5g allowance. Installation requires matching the battery voltage and plug to the aircraft.
Each battery carries discharge ratings of 70C continuous and 140C burst, with a maximum charge rate of 5C. Charging must stop immediately when cell voltage reaches 4.2V; the normal cell-voltage range is 3.7V–4.2V. Before use, inspect the battery surface and check that its voltage is normal. If a new battery fails to hold a full charge or loses charge very quickly, the charging guidance calls for several initial charge cycles using a balance charger.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | 4 Packs CNHL MiniStar 850mAh 11.1V 3S 70C Lipo Battery with XT60 Plug |
| Stock number | 85703G |
| Battery chemistry | LiPo |
| Capacity | 850mAh |
| Voltage and cell configuration | 11.1V / 3-Cell / 3S1P |
| Continuous discharge rate | 70CContinuous discharge. |
| Burst discharge rate | 140CBurst discharge. |
| Charge rate | 5C MaxMaximum charge rate. |
| Dimensions | 25 × 30 × 62mm1–5mm dimensional difference. |
| Weight | Approximately 86g (±5g)Approximate weight, ±5g. |
| Output connector | XT60 |
| Balance connector | JST / XH |
| Package contents | 4 × CNHL MiniStar 850mAh 11.1V 3S 70C LiPo batteries with XT60 plugsSupplied four-pack configuration. |
| Intended application | 150- and 180-size FPV multirotors, particularly micro FPV racing dronesVoltage and plug must match the RC model. |
| Electrical fit requirement | Matching voltage and plug are required. |
| Cell charging cutoff | Stop charging immediately when cell voltage reaches 4.2V.During charging. |
| Cell voltage range | 3.7V–4.2VNormal cell voltage. |
| Battery inspection | Check the battery surface and confirm normal voltage before use.Before use. |
| Initial charging guidance | Use a balance charger to charge and cycle the battery several times first.If a new battery will not hold a full charge or loses charge very quickly. |
Request a quote for 4 Packs CNHL MiniStar 850mAh 11.1V 3S 70C Lipo Battery with XT60 Plug
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
