ChinaDrone.Request a quote ↗
COMPONENT

2 Packs CNHL MiniStar 850mAh 11.1V 3S 70C Lipo Battery with XT60 Plug

By CNHL ↗

The CNHL MiniStar 850mAh 11.1V 3S 70C LiPo package supplies two batteries with XT60 output plugs and JST / XH balance connectors. Designed for 150 and 180 size FPV multirotors with matching voltage and plugs, each pack uses a 3S1P configuration and supports 70C continuous and 140C burst discharge.

Request a quote ↗
CNHL MiniStar 850mAh 11.1V 3S 70C LiPo battery with XT60 plug and dimension annotations
CNHL MiniStar 850mAh 11.1V 3S 70C LiPo battery with XT60 plug and dimension annotations
Product2 Packs CNHL MiniStar 850mAh 11.1V 3S 70C Lipo Battery with XT60 Plug
Stock number85703G
Capacity850mAh
Voltage and cell configuration11.1V / 3-Cell / 3S1P
Discharge rate70C continuous / 140C burst
Maximum charge rate5C Max

Product overview

The CNHL MiniStar package supplies two 850mAh 11.1V 3S 70C LiPo batteries with XT60 plugs for 150 and 180 size FPV multirotors, principally micro FPV racing drones. Integration requires matching voltage and plug type. Each battery has a three-cell 3S1P configuration, an XT60 output connector and a JST / XH balance connector. Each pack measures 25 × 30 × 62mm, with a stated 1–5mm dimensional difference, and weighs approximately 86g with a ±5g allowance. The supplied hardware consists of two battery packs.

The batteries carry discharge ratings of 70C continuous and 140C burst, with a maximum charge rate of 5C. Charging must stop immediately when cell voltage reaches 4.2V; the normal cell-voltage range is 3.7V–4.2V. Check the battery surface on receipt and check for normal voltage before use. If a new pack does not hold a full charge or loses charge very quickly, the prescribed initial procedure is to use a balance charger to charge and cycle it several times.

Specifications

SpecificationValue & conditions
Product2 Packs CNHL MiniStar 850mAh 11.1V 3S 70C Lipo Battery with XT60 Plug
Stock number85703G
Capacity850mAh
Voltage and cell configuration11.1V / 3-Cell / 3S1P
Discharge rate70C continuous / 140C burst
Maximum charge rate5C Max
Dimensions25X30X62mm1–5mm dimensional difference.
Weight86gApproximate; ±5g.
Output connectorXT60
Balance connectorJST / XH
Package contentsTwo CNHL MiniStar 850mAh 11.1V 3S 70C LiPo batteries with XT60 plugs.
Intended application150 and 180 size FPV multirotors, principally micro FPV racing drones.Voltage and plug must match.
Charging cutoffStop charging immediately at 4.2V.During charging; per cell.
Normal voltage range3.7V~4.2VPer cell.
InspectionCheck the battery surface condition and normal voltage.On receipt and before use.
Initial charging guidanceUse a balance charger to charge and cycle the battery several times first.If a new battery will not hold a full charge or loses charge very quickly.
Warranty90 days.From purchase; unless otherwise stated in the product listing; covers original defects in materials and workmanship.
Warranty exclusionsNormal wear and tear, puffing, swelling, over-discharge, over-charge, improper storage, crash or water damage, connector changes, and damage from misuse or mishandling.Warranty coverage.
SOURCE WITH CHINADRONE

Request a quote for 2 Packs CNHL MiniStar 850mAh 11.1V 3S 70C Lipo Battery with XT60 Plug

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗