ChinaDrone.Request a quote ↗
COMPONENT

2 Packs CNHL Black Series 1500mAh 7.4V 2S 130C Lipo Battery with XT60 Plug

By CNHL ↗

The CNHL Black Series 1500mAh 7.4V 2S 130C battery package contains two LiPo packs with XT60 plugs. Each uses a 2S1P cell arrangement, JST / XH balance connection and 12 AWG wire. Integration requires matching voltage and connectors, allowance for dimensional tolerances, and charging that stops at 4.2V per cell.

Get a free sourcing quote for 2 Packs CNHL Black Series 1500mAh 7.4V 2S 130C Lipo Battery with XT60 Plug

Get a free quote

CNHL Black Series 1500mAh 7.4V 2S 130C LiPo battery with red and black leads and an X2 two-pack marking.
CNHL Black Series 1500mAh 7.4V 2S 130C LiPo battery with red and black leads and an X2 two-pack marking.
ProductCNHL Black Series 1500mAh 7.4V 2S 130C LiPo Battery with XT60 Plug; two-pack
Stock number1501302BK
Capacity1500mAh
Voltage and cell configuration7.4 V / 2-Cell / 2S1P
Discharge rate130C continuous / 260C burst
Maximum charge rate5C Max

Product overview

The CNHL Black Series 1500mAh 7.4V 2S 130C is a lithium polymer battery supplied as a pair of packs with XT60 output plugs. Each pack uses a two-cell 2S1P configuration and provides 1500mAh capacity at 7.4 V. Its discharge ratings distinguish 130C continuous operation from 260C burst discharge, while charging is limited to 5C maximum. Stock number 1501302BK identifies this configuration. The supplied hardware consists of two batteries, each with an XT60 output connection, a JST / XH balance connector and 12 AWG wire.

For installation space, each pack measures 78 × 39 × 15mm, with a stated dimensional difference of 1–5mm. Approximate weight is 94g with a ±5g tolerance. Electrical fit requires the equipment’s voltage and plug to match the battery. Charging must stop immediately when a cell reaches 4.2V; the normal cell-voltage range is 3.7V–4.2V. Before use, inspect the battery surface and check its voltage. If a new pack fails to retain a full charge or loses charge rapidly, the charging guidance calls for several cycles using a balance charger.

Specifications

SpecificationValue & conditions
ProductCNHL Black Series 1500mAh 7.4V 2S 130C LiPo Battery with XT60 Plug; two-pack
Stock number1501302BK
Capacity1500mAh
Voltage and cell configuration7.4 V / 2-Cell / 2S1P
Discharge rate130C continuous / 260C burst
Maximum charge rate5C Max
Dimensions78 × 39 × 15mm1–5mm dimensional difference.
WeightApproximately 94gApproximate weight; ±5g.
Output connectorXT60
Balance connectorJST / XH
Wire gauge12 AWG
Package contentsTwo CNHL Black Series 1500mAh 7.4V 2S 130C LiPo batteries with XT60 plugs
Electrical fit requirementRequires matching voltage and plugVoltage and plug must match the intended equipment.
Cell charge stopping voltageStop charging immediately at 4.2V per cellDuring charging.
Cell voltage range3.7V–4.2VNormal cell voltage.
Initial inspectionCheck battery surface condition and voltageBefore use.
Balance charging guidanceUse a balance charger for several charge cycles firstIf a new battery will not hold a full charge or loses charge very quickly.

Ask for the 2 Packs CNHL Black Series 1500mAh 7.4V 2S 130C Lipo Battery with XT60 Plug price ↑

Related guides

UHS350P automatic drone station shown open with a drone above its landing platform
Component

UHS350P Drone Hangar

By Yifei Zhineng

The Yifei Zhineng UHS350P is a fixed automatic drone station supporting DJI Mavic 3T and Mavic 3M aircraft. It combines a rotating-door hangar, contact charging, UPS power and air conditioning with drone management software supporting private cloud deployment. Construction-site monitoring is a stated application, and aircraft configuration is governed by the delivery contract.

Grepow Tattu R-Line 3.0 battery packs with attached leads and connectors.
Component

Grepow Tattu R-Line 3.0 Battery Series

By Grepow

The Grepow Tattu R-Line 3.0 Battery Series comprises battery packs for professional FPV racing, with capacities from 1050mAh to 2000mAh and discharge rates up to 120C. Listed 4S1P, 5S1P and 6S1P configurations provide distinct voltage, size and weight options for integration into racing drone setups.

CUAV IC-HUB Pro bus expansion module with silver enclosure and two visible CAN connectors
Component

CUAV IC-HUB Pro Power Module

By CUAV

The CUAV IC-HUB Pro is an eight-output I2C/CAN bus expansion and regulated power module for unmanned-system peripherals. It accepts 8–70V input from 2S–16S lithium battery packs and provides 5V outputs in a compact aluminum enclosure, with a 7A total current rating and individual 2A port protection.

QIHEHUI D2K tethered power supply box with control screen, connectors and carrying handles
Component

QIHEHUI D2K Tethered System

QIHEHUI

Shanghai Qi He Hui Aviation Technology Co., Ltd.’s QIHEHUI D2K is a tethered power supply for the DJI M30, pairing a G3 tethered box with a G2K onboard supply. It supports extended flight, fiber optic HD video downlink and mission equipment including lighting, communications, electro-optical systems and radar.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC Storm LiPo 2S 500mAh 95C battery with attached leads and yellow connector
Batteries & charging

GEPRC Storm LiPo 2S 500mAh 95C Battery

By GEPRC

The GEPRC Storm LiPo 2S 500mAh 95C Battery is a power pack for freestyle and racing quadcopters. Supplied as one battery, it combines a 2S1P LiPo configuration, 7.4V nominal voltage and XT30 connections in a 29.3g package. Charging, discharge and storage require specific cell-voltage and temperature limits.

AL-15A Cable cross-section diagram showing red and black conductors and labeled cable layers
Batteries & charging

Airfly AL-15A Cable

By Nanjing Airfly Electronic Technology Co., Ltd.

The Kitefly AL-15A Cable from Nanjing Airfly Electronic Technology Co., Ltd. is a tethered power cable using 0.5 mm² multi-strand lightweight alloy conductors. Three red and three black conductors use same-color parallel connections. High-temperature-resistant insulation and black aviation-grade high-strength fiber braiding complete the construction, with an outer diameter of Φ5.2 mm ± 0.2 mm.