Product overview
The CNHL Black Series 1100mAh is a LiPo power pack for FPV drone integration. Its four-cell 4S1P arrangement provides a specified 14.8V, with discharge ratings of 100C continuous and 200C burst. The physical package measures 30x34x76mm, with a stated 1–5mm dimensional difference, and weighs approximately 146g with a ±5g allowance. These dimensions and weight define the battery space and mass that an installation must accommodate. Electrical connections comprise an XT60 output, a JST / XH balance connector and 12# AWG wire.
The product identity specifies two packs, while the package specification lists one battery with an XT60 plug, leaving the supplied quantity inconsistent. Integration requires matching voltage and plug. Charging is limited to 5C maximum and must stop immediately when any cell reaches 4.2V; the stated normal cell voltage range is 3.7V~4.2V. Before use, the battery surface and voltage must be checked. Procurement therefore needs to account for the connector arrangement, dimensional allowance, charging limits and conflicting quantity descriptions.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product | CNHL — 2 Packs CNHL Black Series 1100mAh 14.8V 4S 100C Lipo Battery with XT60 Plug |
| Stock number | 1101004BK |
| Capacity | 1100mAh |
| Voltage and cell configuration | 14.8V / 4-Cell / 4S1P |
| Continuous discharge rate | 100CContinuous discharge. |
| Burst discharge rate | 200CBurst discharge. |
| Charge rate | 5C MaxMaximum charging rate. |
| Dimensions | 30x34x76mm1–5mm dimensional difference. |
| Weight | Approximately 146g (±5g)Approximate weight; ±5g. |
| Output connector | XT60 |
| Balance connector | JST / XH |
| Wire gauge | 12# AWG |
| Supplied quantity descriptions | Package specification: 1 × CNHL Black Series 1100mAh 14.8V 4S 100C LiPo battery with XT60 plug; product identity specifies 2 packs.Product title specifies 2 packs; package specification lists 1 battery. |
| Intended application | Battery power for long-range FPV drones.Voltage and plug must match. |
| Electrical fit requirement | Matching voltage and plug are required.RC battery integration. |
| Charge termination voltage | Stop charging immediately at 4.2V per cell.During charging; voltage per cell. |
| Normal cell voltage range | 3.7V~4.2VVoltage per cell. |
| Battery inspection | Check the battery surface condition and voltage before use.Before use. |
Ask for the 2 Packs CNHL Black Series 1100mAh 14.8V 4S 100C Lipo Battery with XT60 Plug price ↑
