ChinaDroneRequest a quote →
CKESC STONE 40A-M V2.0 electronic speed controller circuit board with attached wiresCKESC STONE 40A-M V2.0 electronic speed controller circuit board with attached wires

CKESC STONE 40A-M V2.0

The CKESC STONE 40A-M V2.0 is a UAV electronic speed controller rated for 6~14S operation. It combines PWM control, adaptive working parameters and throttle phase-loss protection, with a 40A continuous current rating under specific heat dissipation conditions.

CKESCMotors, ESCs & propellers
Weight
32.2 g
Dimensions
51*47.5 mm
Voltage
6~14S

Get a free quote

Product overview

The STONE 40A-M V2.0 supports headwind starting through its starting algorithm and combines throttle phase-loss protection with fast throttle response. Adaptive working parameters support its control operation. Its 40A continuous operating current requires specific heat dissipation, while its 60A instantaneous operating current is limited to less than 3 seconds. The controller measures 51*47.5mm and weighs 32.2g with wire.

PWM control uses a 3.3~5V input signal level and a throttle travel range of 1000~2000us. The throttle refresh rate spans 50~500Hz, with 100~400Hz recommended. A temperature protection point of 125℃ provides the controller’s thermal protection threshold. The STONE 40A-M V2.0 has no BEC.

Motors & ESCs

Specifications

CKESC STONE 40A-M V2.0 specifications
SpecificationValue & conditions
Model and product typeCKESC STONE 40A-M V2.0 UAV electronic speed controller
Specification40A 6~14S
Voltage6~14S
Continuous operating current40ASpecific heat dissipation.
Instantaneous operating current60ALess than 3 seconds.
Dimensions51*47.5mm
Weight32.2gWith wire.
Input signal level3.3~5V
BECNo BEC
CommunicationPWM
Throttle travel range1000~2000us
Throttle refresh rate50~500Hz (100~400Hz recommended)
Temperature protection point125℃
Starting algorithmStarting algorithm designed for reliable starts in headwindsHeadwind starting.
Throttle functionsThrottle phase-loss protection and fast throttle response
Adaptive parametersAdaptive working parameters

Related guides