ChinaDroneRequest a quote →
CKESC STONE 40A-M V1.0 electronic speed controller with yellow casing and attached wiresCKESC STONE 40A-M V1.0 electronic speed controller with yellow casing and attached wires

CKESC STONE 40A-M V1.0

The CKESC STONE 40A-M V1.0 is a UAV electronic speed controller with PWM communication, adaptive working parameters and throttle phase-loss protection. It supports 6~14S operation, delivers 40A continuous current with specific heat dissipation, and accommodates 80A instantaneous current for less than 3 seconds.

CKESCMotors, ESCs & propellers
Weight
34.4 g
Dimensions
51.7 × 24.7 mm
Voltage
6~14S

Get a free quote

Product overview

The CKESC STONE 40A-M V1.0 electronic speed controller provides UAV throttle control with adaptive working parameters, a starting algorithm designed for headwind starts, and throttle phase-loss protection. It supports 6~14S operation and a continuous operating current of 40A with specific heat dissipation. Its instantaneous operating current is 80A for less than 3 seconds. The unit measures 51.7 × 24.7mm and weighs 34.4g with wire.

PWM communication accepts an input signal level of 3.3~5V. The throttle travel range is 1000~2000us, with a supported refresh rate of 50~500Hz and a recommended range of 100~400Hz. Fast throttle response supports responsive control, while the temperature protection point is 125°C. The controller has no BEC.

Motors & ESCs

Specifications

CKESC STONE 40A-M V1.0 specifications
SpecificationValue & conditions
ModelCKESC STONE 40A-M V1.0
Specification40A 6~14S
Voltage6~14S
Continuous operating current40ASpecific heat dissipation.
Instantaneous operating current80ALess than 3 seconds.
Dimensions51.7 × 24.7mm
Weight34.4gWith wire.
Input signal level3.3~5V
BECNo BEC
CommunicationPWM
Throttle travel range1000~2000us
Throttle refresh rate50~500Hz; 100~400Hz recommended
Temperature protection point125°C
Starting algorithmStarting algorithm designed for headwind starts
Throttle controlThrottle phase-loss protection and fast throttle response
Working parametersAdaptive working parameters

Related guides