ChinaDroneRequest a quote →
CYS BLS5808 F1 helicopter tail servo with black metal housing and silver output splineCYS BLS5808 F1 helicopter tail servo with black metal housing and silver output spline

CYS BLS5808 F1

The CYS BLS5808 F1 is an all-metal brushless digital tail servo for 700 helicopters. Built with titanium gears, dual bearings and a 25T output spline, it operates on 6.0-7.4V and uses PWM control. Its 40*20*39.35mm body weighs 72g±1g and carries a 300mm cable.

Weight
72g±1g
Dimensions
40*20*39.35 mm
Operating voltage
6.0-7.4 V

Get a free quote

Product overview

The CYS BLS5808 F1 is an all-metal brushless digital tail servo for 700 helicopters. Its construction combines a brushless motor, titanium gears and dual bearings, with a 25T output spline. The servo measures 40*20*39.35mm and weighs 72g±1g. A 300mm cable provides the electrical connection, with brown/black identifying the negative wire, red the positive wire and orange/white the signal wire. PWM control uses a neutral position of 1500usec and a signal range of 1000usec ~ 2000 usec.

Operating on 6.0-7.4V, the servo delivers 4.5kg.cm of torque at 6.0V and 6.0kg.cm at 7.4V. No-load travel takes 0.029sec/60° at 6.0V and 0.024sec/60° at 7.4V. Total angular travel is 90°, with 45° on each side, and the operating direction is reverse. Standby current is 20mA at either voltage; no-load current is 80mA at 6.0V and 100mA at 7.4V. The control characteristics include 1usec sensitivity and a 2usec deadband.

Specifications

CYS BLS5808 F1 specifications
SpecificationValue & conditions
ProductCYS BLS5808 F1 all-metal brushless tail servo for 700 helicopters
Servo typeAll-metal brushless digital servo
Weight72g±1g
Dimensions40*20*39.35mm
Control methodPWM signal control; neutral position 1500usec
Operating voltage6.0-7.4V
No-load speed0.029sec/60°At 6.0V; no load.
No-load speed0.024sec/60°At 7.4V; no load.
Torque4.5kg.cmAt 6.0V.
Torque6.0kg.cmAt 7.4V.
Operating angle90° total; 45° each side
Operating direction and signal rangeReverse; range 1000usec ~ 2000 usec
Standby / no-load current20mA/ 80mAAt 6.0V.
Standby / no-load current20mA/ 100mAAt 7.4V.
Deadband2usec
Motor typeBrushless
Bearing typeDual bearings
Output spline25T
Gear typeTitanium gears
Cable length300mm
Torque range4.5Kg.cm ~6.0Kg.cm
Speed range0.029sec ~ 0.024sec/60 °
Voltage range6.0Volts ~7.4Volts
Sensitivity1usec
Wire identification
  • Negative: brown/black;
  • positive: red;
  • signal: orange/white