Product overview
The CADDX Gofilm 20 combines a compact FPV flight platform with a Walksnail Avatar imaging system for indoor flying, racing and outdoor filming. Its Moonlight Kit video transmitter and Starlight sensor provide recording options up to 4K at 60fps, with a 160° field of view and selectable 4:3 or 16:9 framing. Gyroflow support provides a route to post-production stabilization. Recording uses MP4, with a maximum bitrate of 150Mbps and U3 microSD storage support up to 256G.
The aircraft measures 133x123x39mm on a 94mm wheelbase and weighs approximately 115g excluding its battery. Its injection-molded frame incorporates a damped camera mounting arrangement, while concealed power wiring connects through a built-in XT30 connector. The AIO flight controller integrates an ELRS 2.4GHz receiver, and propulsion uses 1303-6000KV motors with HQprop T2x2x3 propellers. For integration planning, the camera measures 19.6mmx19mmx24mm and the video transmitter measures 15.3mmx34.5mmx34.5mm; mounting provisions offer 20mm and 25.5mm hole patterns.
The supplied configuration is a GOFILM 20 FPV set with imaging, control and propulsion hardware, accompanied by an ND8 filter, 2-inch propellers, battery strap, cables, fasteners, hex key and manual. The propulsion system supports 2-4S, while the separate wide power-input specification is 7.4V-25.2V. Flight time is approximately 5.5 minutes with a 4S 650mAh battery, making that battery configuration material to endurance planning. Video transmission distance is specified as 4 KM, and the listed power is 1200mw.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | CADDX Gofilm 20 |
| Video system | Walksnail Avatar |
| Image sensor | Starlight sensor |
| Aspect ratios | 4:3, 16:9 |
| Video resolutions and frame rates | 4K@30/60fps; 2.7K@30/60fps; 1080p@100/60fps; 720p@60fps |
| Field of view | 160° |
| Flight controller | CADDXF4_AIO_ELRS |
| Video transmitter | Moonlight Kit |
| Gyroflow support | Supported |
| Power | 1200mw |
| Wheelbase | 94mm |
| Brushless motors | 1303-6000KV |
| Propellers | HQprop T2x2x3 |
| Flight time | Approximately 5.5minWith a 4S 650mAh battery. |
| Receiver | ELRS 2.4GHz |
| Battery connector | XT30 |
| Video transmission distance | 4 KM |
| ISO range | 100-25600 |
| Maximum bitrate | 150Mbps |
| Video format | MP4 |
| Wide power input | 7.4V-25.2V |
| Storage card | U3 microSD, Max 256G |
| Aircraft dimensions | 133x123x39mm |
| Camera dimensions | 19.6mmx19mmx24mm |
| Video transmitter dimensions | 15.3mmx34.5mmx34.5mm |
| Aircraft weight | Approximately 115gExcluding battery. |
| Product purpose | FPV aircraft for indoor flying, competitive racing and outdoor filming. |
| Physical and control architecture | Injection-molded frame, damped camera mounting, concealed power wiring with a built-in XT30 connector, and an AIO flight controller with an integrated ELRS receiver.Propulsion system supports 2-4S. |
| Video transmitter mounting provisions | 20mm and 25.5mm mounting-hole provisions for video transmitter integration. |
| Supplied configuration | GOFILM 20 FPV set, instruction manual, flight-controller USB cable, 15*180mm battery strap, ND8 filter, 2-inch propellers, screw pack, 1.5mm hex key and 6Pin USB cable.Included package equipment. |
Request a quote for CADDX Gofilm 20
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.