The BrotherHobby Hyperbola 5'' Frame Kit is a five-inch-designated frame kit.
The BrotherHobby Hyperbola 5'' Frame Kit is a frame kit bearing the Hyperbola model name and a five-inch designation. Its stated supplied configuration is a frame kit.
| Specification | Value & conditions |
|---|---|
| Manufacturer | BrotherHobby |
| Model and supplied configuration | Hyperbola 5'' Frame Kit |
The AXR 7307 MG-D micro servo combines a coreless motor, metal gears and two bearings for light aircraft control surfaces and compact mechanisms. It weighs 7.1 g, uses PWM control and operates at 4.8–8.4 V. Integration requires attention to mounting geometry, controller settings, delivered version and continuous-load requirements.
The cysmodel CYS-S0070 is an analog landing gear servo with plastic gears, an iron-core motor, dual bearings and a 25T output spline. Measuring 44.1*23*24.4mm and weighing 30g±1g, it uses PWM control and a 6.0-7.4V supply. Travel is 90° total, with voltage-dependent torque and no-load speed.
The GEPRC Vapor O4 Pro Camera Damping Upgrade Kit is a camera mounting accessory for upgrading Vapor frames to use the DJI O4 Air Unit Pro camera module. It combines a four-point suspended damping structure with 7075 aluminum construction and includes brackets, silicone damping balls, installation tools and fasteners.
The ABASS R-A16 digital servo serves consumer drones, model aircraft, robotics and automation applications. It incorporates a brushless coreless motor, all-metal gears and an aluminum-alloy housing. Measuring 40.5 × 20.5 × 25.9mm and weighing 58g, it has voltage-specific no-load speed and stall-torque ratings at 6V, 7.4V and 8.2V.
The HAKRC M2, M3 damping balls are orange silicone shock absorbers for reducing excess vibration in flight control. They install directly into the flight control system’s four corner holes, with size selected to match. Procurement is expressed in individual units.
The EFT E616P is a medium drone training platform featuring an integrated body, wrap-around folding arms and provisions for flight-controller and battery integration. Assembly, transport restraint and rain-and-dust resistance.
The GEPRC GEP-LC7HD Frame is a 7inch carbon airframe kit for Crocodile7 HD long-range FPV builds. Its 315mm motor spacing, 174g frame weight, defined electronics mounting patterns and internal GPS position support component integration. Supplied plates, arms, hardware, mounts and protective parts form the build foundation; flight electronics and propulsion are recommended separately.
The ABASS R-A10 is a digital servo for consumer UAVs, model aircraft, robotics and other automated products. A coreless motor, all-metal gears and aluminum-alloy housing form a 45g component measuring 35.5 × 15 × 31.1mm. Specifications cover three operating voltages, with voltage-dependent no-load speed and stall torque.
The GEPRC GEP-LX6-V4 Leopard Frame is a six-inch True X airframe kit for competition and freestyle builds. Its 255mm-wheelbase structure combines carbon plates with a #7075 aluminum body. Camera side panels, adjustable camera positioning and an included dual-output power distribution board support integration of separately selected flight electronics and propulsion.
The KST A12-T is a wing servo with a seven-phase coreless DC motor, a 30 × 12 × 35.5 mm case with ±0.2 mm tolerance, and a weight of 32 g ±10%. It operates at DC6.0V–8.4V and provides ±60° default travel, with voltage-specific torque and speed ratings.