Product overview
The BrotherHobby Avenger LR 2004 Motor (CW) is an Avenger Series motor for FPV drone propulsion. Its physical construction combines an Al 7075 base casing and bell cap with a titanium alloy shaft. The electromagnetic assembly uses a 12N14P configuration, a 0.15mm Nippon silicon-steel stator and N52H arc magnets. Japanese NSK bearings measuring 8x3x4mm complete the specified bearing arrangement. This is a motor component for integration into a drone, rather than a complete flight platform or airframe kit.
Integration details include an M2 bolt pattern on 12X12mm spacing and 24AWG wiring specified at 16cm long. The motor weighs 16.8g with short wire, making that wiring qualification relevant when accounting for installed mass. The specified LiPo battery range is 2S-6S. Its 1650KV entry carries a separate qualification of 2S operation with a 7-inch triblade propeller; that propeller configuration should remain distinct from the broader battery cell-count range when selecting the surrounding propulsion hardware.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | BrotherHobby Avenger LR 2004 Motor (CW) |
| Product type | Avenger Series FPV drone motor |
| KV rating | 1650KV2S with a 7-inch triblade propeller. |
| Base casing | Al 7075 |
| Stator | 0.15mm Nippon silicon steel |
| Motor configuration | 12N14P |
| Shaft material | Titanium alloy |
| LiPo cell count | 2S-6S |
| Bolt pattern | M2 (12X12mm) |
| Bearings | Japanese NSK 8x3x4mm |
| Rotor magnets | N52H arc magnets |
| Weight | 16.8gWith short wire. |
| Wire gauge and length | 24AWG, 16cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger LR 2004 Motor (CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
