Product overview
The BrotherHobby Avenger 5210 380KV/470KV Motor(CW) is a motor component for FPV drone propulsion. Its construction combines an Al 7075 base casing and bell cap with a SUS420 shaft. The motor has a 10mm stator, a 24N28P configuration and N52H arc rotor magnets. Bearing dimensions are given as 16*8*5, without a stated unit. The specified motor weight is 213g. The product is identified as an individual motor component.
Mechanical integration is defined by an M4(30*30mm) bolt pattern and an M6 propeller adapter shaft thread. Electrical specifications identify an 8S LiPo battery configuration and 16# AWG wire with a 30cm length. The product identity specifies 380KV/470KV, and the selector gives 380 and 470. A conflicting KV specification of 360KV/400KV/415KV leaves the applicable motor rating unresolved; those three values cannot be treated as established options for this exact model.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | BrotherHobby Avenger 5210 380KV/470KV Motor(CW) |
| KV selector values | 380 / 470 |
| Conflicting KV specification | 360KV/400KV/415KV; conflicts with the 380KV/470KV product identity and 380 / 470 selector values, leaving applicability unresolved. |
| Base casing | Al 7075 |
| Stator | 10mm |
| Motor configuration | 24N28P |
| Propeller adapter shaft thread | M6 |
| Shaft | SUS420 |
| Battery cell count | 8SLiPo battery. |
| Bolt pattern | M4(30*30mm) |
| Bearings | 16*8*5 |
| Rotor | N52H arc magnets |
| Weight | 213g |
| Wire gauge and length | 16# AWG, 30cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 5210 380KV/470KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
