Product overview
The BETAFPV Pavo360 FPV Quadcopter is a flight platform for panoramic filming with the separately purchased SMO 360 camera. Its thin, flat architecture is designed to keep the aircraft out of the panoramic recording, while retractable landing gear provides clearance for the camera lens on most flat landing surfaces. The aircraft has a 168mm wheelbase and weighs 326g. Its construction descriptions identify PA12 for the frame and carbon fiber for the frame kit. The camera mount accepts only the SMO360.
Both video-system versions combine Black 2204-2400KV (6S) motors, transparent grey GF D76-5B propellers and an F7 6S AIO 35A Toothpick flight controller. The HD digital configuration uses a Caddx Polar Vista Kit; the analog configuration uses a Caddx Ratel with an A02 800MW transmitter. Receiver configurations are PNP or TBS Crossfire, and FPV camera tilt adjusts through 0-60°. The battery specification is 3S 850mAh 75C, with about five minutes of smooth flight. The package includes two XT30 batteries and four additional propellers.
Camera installation requires removing the top plate cover, and the SMO 360 remote recording and power cables require soldering to the flight controller before those functions can be used. Landing gear defaults to transmitter channel eight after binding and must use Servo 0; additional lens protection remains necessary. The supplied product is new, unused and functional but has been stored for approximately three years. Its battery may be swollen, over-discharged or at low voltage, and product defects and performance issues are excluded from warranty coverage.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BETAFPV Pavo360 FPV Quadcopter |
| Motor | Black 2204-2400KV (6S) |
| Power connection | XT30 double-end aircraft model power connector, red and black wire plus subboard |
| Propeller | Transparent grey GF D76-5B |
| Flight controller | F7 6S AIO 35A Toothpick Flight Controller |
| Battery | 3S 850mAh 75C battery |
| FPV camera and video transmitter | Caddx Polar Vista KitHD digital version. |
| FPV camera and video transmitter | Caddx Ratel+ A02 800MWAnalog version. |
| FPV camera tilt angle | 0-60° |
| Weight | 326g |
| Wheelbase | 168mm |
| Receiver configuration | PNP/TBS Crossfire receiver |
| Flight time | About 5 minutesSmooth flight. |
| Panoramic filming architecture | Ultra-thin, flat frame designed for unobstructed 360-degree recording.With the SMO 360 camera. |
| Frame materials | PA12 frame material. |
| Frame kit construction | Carbon fiber construction.Pavo360 frame kit. |
| Panoramic camera compatibility | SMO360 Camera only; other cameras cannot be installed in the mount.Both analog and HD digital versions. |
| Camera integration access | Remove the top plate cover to install the camera directly.SMO 360 camera installation. |
| Supplied configuration | 1 Pavo360 FPV Quadcopter without SMO 360 Camera; 2 CW and 2 CCW Gemfan D76 5-Blades Propellers; 1 Pavo360 Sticker; 2 3S 850mAh 75C XT30 batteries. |
| Landing gear purpose | Landing gear protects the camera lens during landing.Landing on most flat surfaces. |
| Additional lens protection | Further lens protection is necessary; a lens guard is strongly recommended.With the SMO 360 camera. |
| Landing gear control | Extension and retraction use the transmitter's 8th-channel toggle switch by default; the setting can be changed on the transmitter or flight controller.After binding; default transmitter settings. |
| Active servo restriction | Only Servo 0 is active; assigning another servo prevents landing gear operation.Landing gear servo configuration. |
| Factory wiring limitation | Remote recording and power cables are not factory-soldered to the flight controller; soldering is required to use these functions.SMO 360 remote recording and power functions. |
| Storage and battery condition | New, unused and functional, with approximately three years of storage; the battery may be swollen, over-discharged or have low voltage.Product stored for approximately three years. |
| Warranty limitation | Product defects and performance issues are not covered under warranty. |