Product overview
The BETAFPV Beta85X V2 Whoop Quadcopter is a powered flight platform for FPV flying and carrying a separate HD recording camera. Its inverted pusher arrangement places the cameras and battery above the frame, concentrating equipment around the center of the aircraft. The Beta85X frame carries connector-equipped 1105 5000KV motors and Gemfan 2020 four-blade propellers, with outward propeller rotation configured by default. Aircraft weight is 78g without a battery, and the specified power system is 4S.
The onboard viewing system combines a Caddx Ant analog FPV camera in NTSC 4:3 format with an M02 5.8G video transmitter rated at 25-350mW. The FPV camera adjusts through 25-45°, while the separate recording-camera mount has a 15° angle. Two supplied mounts accommodate either an Insta360 GO or a customized Naked Camera, and a rubber damper provides vibration isolation for the recording camera. Flight control uses the F4 AIO 12A FC V3, with an F405 processor and BLHeli_S.
The package includes the quadcopter, both recording-camera mounts, a Naked Camera V2 case, a BEC board, a Gemfan propeller set containing two clockwise and two counterclockwise propellers, and a screw pack. Batteries and both optional recording cameras are excluded. Receiver choices include Frsky XM+, DSMX, Futaba S-FHSS and TBS Crossfire. Flight duration is 4-5 minutes with a 450mAh 4S 75C battery. The fitted 5000KV motors are intended for 4S operation; 3S use is discouraged because of insufficient power.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | BETAFPV Beta85X V2 Whoop Quadcopter |
| Product configuration | Whoop-style quadcopter with pusher configuration |
| Equipment placement | Cameras and batteries positioned on top of the drone |
| Power system | 4s |
| Weight | 78gWithout battery. |
| Flight controller | F4 AIO 12A FC V3 |
| Frame | Beta85X Frame |
| Motors | 1105 5000KV with connector |
| Propellers | Gemfan 2020 4-Blades Props |
| Receiver options | Frsky XM+ / DSMX / Futaba S-FHSS / TBS Crossfire |
| Battery | 4S 450mAhBattery not included. |
| FPV camera | Caddx Ant Analog FPV Camera; NTSC, 4:3 |
| FPV camera angle adjustment | 25-45° |
| Recording camera mount angle | 15° |
| Video transmitter | M02 25-350mW 5.8G VTX |
| Flight time | 4min - 5minWith 450mAh 4s 75C battery. |
| Recording camera mount options | Two customized HD camera mounts supporting Insta360 GO and Naked Camera |
| Recording camera vibration isolation | Rubber damper for the HD camera |
| Controller processor and ESC firmware | F405 processor; BLHeli_S |
| Controller input battery range | 2-4SF405 2-4S AIO 12A Brushless Flight Controller V3. |
| Current capability | 12A continuous; 13A burstF405 2-4S AIO 12A Brushless Flight Controller V3. |
| Recommended battery voltage | 14.8V with 4S 450mah battery1105 5000KV motors. |
| Motor power limitation | 3S use is discouraged because of insufficient power1105 5000KV motors with 3S power. |
| Propeller direction | Props outDefault configuration. |
| Included equipment | 1 Beta85X V2 Whoop Quadcopter; 1 Insta360 GO camera mount; 1 customized Naked Camera mount; 1 Case for Naked Camera V2; 1 BEC board; 1 Gemfan 2020 four-blade propeller set (2CW+2CCW); 1 screw packSupplied package. |
| Excluded equipment | Batteries, Insta360 GO and Naked Camera are not includedSupplied package. |