ChinaDrone.Request a quote ↗
COMPONENT

TF03

By BENEWAKE ↗

The Benewake TF03 is a compact LiDAR sensor for UAV, transportation and security warning applications, with a 0.1–180 m range and an enclosure offering up to IP67 protection. It supports selectable interfaces and configurable operating parameters. Separate housing-free and UAV-specific versions address different integration needs; conflicting frequency ratings leave its definitive maximum frame rate unresolved.

Request a quote ↗
Benewake TF03 LiDAR sensor with a black housing and front optical window.
Benewake TF03 LiDAR sensor with a black housing and front optical window.
ManufacturerBenewake
ModelTF03
Product type and applicationsThird-generation TF-series LiDAR sensor for UAVs, intelligent transportation and security warning applications.
Dimensions44 mm × 43 mm × 32 mm
InterfacesUART, CAN, RS-232 and RS-485, selected according to application requirements.
Ingress protectionUp to IP67Enclosed configuration.

Product overview

Benewake’s TF03 is a third-generation TF-series LiDAR sensor intended for UAV ranging, intelligent transportation and security warning applications. Its architecture combines an optical system with signal-processing circuitry in a compact enclosure measuring 44 mm × 43 mm × 32 mm. The housing uses aluminum alloy and high-infrared-transmission glass, with protection reaching IP67. At 86 ± 3 g and a power consumption of ≤ 1 W, the enclosed configuration provides defined size, mass and power requirements for integration as a sensing component.

The TF03 has a measurement range of 0.1–180 m, a minimum blind-zone rating of 0.1 m and strong ambient-light resistance rated at 100 KLux. Its frequency specifications are inconsistent: the 1–9800 Hz range and separate maximum frame-rate rating of 7 kHz give different upper limits, leaving the definitive maximum unresolved. Integration options include UART, CAN, RS-232 and RS-485, selected to suit the application. Users can configure output frame rate, baud rate, trigger mode and the out-of-range threshold; a built-in bootloader supports local firmware upgrades.

Configuration selection affects the space and mass allocated to the sensor. The enclosed TF03 is distinct from a separate customized housing-free version weighing 10 g and measuring 31.0 mm × 30.2 mm × 19.2 mm. Those smaller dimensions and lower weight apply specifically to that housing-free configuration. A further customized version is designed for UAV applications. The product is a LiDAR component for integration into a larger system, rather than a supplied flight platform or airframe kit.

Specifications

SpecificationValue & conditions
ManufacturerBenewake
ModelTF03
Product type and applicationsThird-generation TF-series LiDAR sensor for UAVs, intelligent transportation and security warning applications.
Dimensions44 mm × 43 mm × 32 mm
InterfacesUART, CAN, RS-232 and RS-485, selected according to application requirements.
Ingress protectionUp to IP67Enclosed configuration.
Measurement range0.1–180 m
Measurement frequency1–9800 Hz; a separate maximum frame-rate rating of 7 kHz conflicts with this upper limit.
Maximum frame-rate ratingMaximum 7 kHz; conflicts with the separately specified 1–9800 Hz frequency range.
Power consumption≤ 1 W
Weight86 ± 3 g
Minimum blind zoneMinimum 0.1 m
Strong ambient-light resistance100 KLux
Optical and electronic architectureOptical system combined with signal-processing circuitry.
Housing materialsAluminum alloy and high-infrared-transmission glass.Enclosed configuration.
Configurable operating parametersOutput frame rate, baud rate, trigger mode and out-of-range threshold.
Firmware updatingBuilt-in bootloader supports local firmware upgrades.
Housing-free configurationSeparate customized housing-free version.Separate customized configuration without a housing.
Housing-free weight10 gSeparate customized configuration without a housing.
Housing-free dimensions31.0 mm × 30.2 mm × 19.2 mmSeparate customized configuration without a housing.
UAV-specific configurationSeparate customized version designed for UAV applications.Separate customized configuration designed for UAV applications.
SOURCE WITH CHINADRONE

Request a quote for TF03

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Cameras & sensors

CADDX Ratel 2

By Caddx

The CADDX Ratel 2 is a compact analog FPV camera for freestyle and racing applications on most FPV drones of 3 inches and above. It combines a 1/1.8-inch sensor, 1200TVL resolution and Super WDR with selectable 165°/160° views, a 19mm × 19mm format and DC 4.5-36V input.

Cameras & sensors

SU04

By RadioLink

The RadioLink SU04 is a compact ultrasonic sensor accessory for flight-controller-based obstacle avoidance and altitude holding. Its single-detector transceiver weighs 8g and measures 20 × 22 × 19 mm. It supports I2C and UART with MAVLink, and includes connection wires for Mini Pix and PIXHAWK.

LINPOWAVE V100 Vehicle 4D mmWave Radar without case, showing the circuit board and antenna array
Cameras & sensors

V100 Vehicle 4D mmWave Radar

By Beijing Linpowave Co., Ltd

The LINPOWAVE V100 Vehicle 4D mmWave Radar is a compact front-facing sensor for UAV altitude measurement, forward obstacle sensing, robotics and ADAS. It combines position and velocity output with configurable 0.2–100-meter detection. Open-board and housed configurations support different installations, while the unhoused module weighs approximately 10g.