MT2610-920KV MultiRotor CW CCW Brushless Motor (2pcs bag)
By RCTimerThe RCTimer MT2610-920KV MultiRotor CW CCW Brushless Motor (2pcs bag) supplies one CW and one CCW motor set for multirotor propulsion. Its 12N14P configuration supports 3-4S LiPo power, with preinstalled 2.0mm bullet connectors. Maximum continuous ratings of 30A and 450W each carry a 180-second duration.
Explore product ↗industryRctimer NEO-6M GPS module & MAG v1.2
By RCTimerThe Rctimer NEO-6M GPS module & MAG v1.2 is a GPS and compass accessory for autopilot integration. It combines a u-blox NEO-6M receiver, HMC5883L compass and ceramic patch antenna in a 40 x 40 x 9mm module. APM and miniAPM cables are included; Fixhawk and Pixhawk installation requires a plug-shell change.
Explore product ↗industryRctimer NEO-7M GPS & MAG V2.0
By RCTimerThe Rctimer NEO-7M GPS & MAG V2.0 is a GPS and compass module for flight-controller integration. It combines a u-blox receiver, HMC5883L compass and ceramic patch antenna, with an Arduflyer/APM cable included. Fixhawk/Pixhawk connection requires a plug-shell change, and the default navigation rate is 1Hz.
Explore product ↗industryRctimer NEO-M8N GPS & MAG(Compass) V2.1
By RCTimerThe Rctimer NEO-M8N GPS & MAG(Compass) V2.1 is a navigation and compass module for APM and Pixhawk integration. It combines a ceramic patch antenna, HMC5883L compass and protected TTL UART interface. A Pixhawk cable is included; APM requires a plug-shell change, and controller firmware overrides default communication settings.
Explore product ↗industryRCTimer PX-SW Switch for Fixhawk/PX4/Pixhawk
By RCTimerThe RCTimer PX-SW is a switch accessory for Fixhawk, PX4 and Pixhawk systems, with a wire length of 250mm. The product combines the PX-SW model designation with a switch and its associated wire.
Explore product ↗industryQuick Release Connector QC10P
By RCTimerThe Quick Release Connector QC10P is intended for fixed-wing aircraft applications. The QC10P designation identifies this quick-release connector, whose stated purpose is to provide a quick-release connection for the specified type of aircraft.
Explore product ↗industryQuick Release Connector QC2-4P
By RCTimerThe RCTimer Quick Release Connector QC2-4P is intended for fixed-wing aircraft.
Explore product ↗industryQuick Release Connector QC2-6P
By RCTimerThe Quick Release Connector QC2-6P is a quick-release hardware connector for fixed-wing aircraft and aircraft applications.
Explore product ↗industryQuick Release Connector QC2-8P
By RCTimerThe Quick Release Connector QC2-8P is a quick-release connection component intended for fixed-wing aircraft. It is identified by the QC2-8P model designation and serves as connection hardware for that stated aircraft application.
Explore product ↗industryQuick Release Connector QC6P
By RCTimerThe Quick Release Connector QC6P is a hardware component intended for fixed-wing aircraft. Its product identity combines a quick-release connector designation with the QC6P model name, identifying an aircraft connection accessory rather than a flight platform.
Explore product ↗industryRCT800 (CNC) Carbon Fiber Landing Gear
By RCTimerThe Rctimer RCT800 (CNC) Carbon Fiber Landing Gear, identified as RCT800-L02, is a carbon fiber landing gear accessory for the RCT800. It is supplied as landing gear only, excluding the RCT800 itself, battery tray and IMU mount.
Explore product ↗industryRctimer/DJI S800 Blue Retractable Landing Skid
By RCTimerThe Rctimer/DJI S800 Blue Retractable Landing Skid is a retractable landing accessory compatible with the DJI S800. The supplied configuration includes a controller board and two servos, and its stated weight is 0.8kg.
Explore product ↗