Rctimer HP4215 630KV 18N24P Multirotor Brushless Motor
By RCTimerThe Rctimer HP4215 630KV 18N24P is a multirotor brushless motor for 2–6S battery integration. It combines NSK bearings, 0.20mm laminations and a dynamically balanced rotor with flexible silicone-insulated leads and preinstalled 3.5mm bullet connectors. Its specified no-load current is 0.75 Amp.
Explore product ↗industryRctimer LT5x4.5 Bullnose Propeller - Blue(4Pairs)
By RCTimerThe Rctimer LT5x4.5 Bullnose Propeller - Blue(4Pairs) is an eight-propeller replacement set with two blades per propeller and 5mm hub openings. It includes four clockwise and four counterclockwise units in blue, each weighing 0.14oz (3.95g), with a specified size of 5045 (5x4.5).
Explore product ↗industryRctimer LT6x4.5 BN Propeller - Black(4Pairs)
By RCTimerThe Rctimer LT6x4.5 BN Propeller - Black(4Pairs) supplies eight black, two-blade bullnose propellers for replacement use. Specified as size 6045 (6x4.5), each has a 5mm hub internal diameter and weighs 5.65g. The package includes four clockwise and four counterclockwise propellers.
Explore product ↗industryM2x16mm Aluminium Standoff Female/Femal Aluminum Textured Spacers (10pcs)
By RCTimerRCTimer’s M2x16mm Aluminium Standoff Female/Female Aluminum Textured Spacers, product code B216, are supplied in a ten-piece pack for airframe assembly and servicing. These lightweight aluminum standoffs combine an anodized finish with a textured grip surface that helps users hold them while working.
Explore product ↗industryM3 RC Vibration Bobbins VV 8x8mm (10pcs/bag)
By RCTimerRCTimer’s M3 RC Vibration Bobbins VV 8x8mm (10pcs/bag) are silicone-based vibration mounts for multirotor camera platforms and flight controllers. The V88M3 package supplies ten bobbins, each weighing 1.7g, with I, D and H dimensions of 8mm and an M3 specification.
Explore product ↗industryM3 Stainless Steel Lock Nut (10pcs/bag)
By RCTimerThe RCTimer M3 Stainless Steel Lock Nut (10pcs/bag) is stainless steel fastening hardware for airframe customization and securing propellers. Supplied in bags of ten, each M3 nut weighs 0.42g and has specified h, m and S dimensions of 3.9mm, 2.4mm and 5.5mm respectively.
Explore product ↗industryM3x15mm 18mm 30mm 35mm 38mm Aluminium Standoff Female/Femal Aluminum Textured Spacers (10pcs)
By RCTimerRCTimer’s M3 female/female aluminum standoffs are airframe hardware supplied in packs of ten. Size options are M3x15mm, M3x18mm, M3x30mm, M3x35mm and M3x38mm. The 15mm spacers are lightweight and anodized, with a textured grip surface that eases holding during airframe assembly and servicing.
Explore product ↗industryRctimer M3x8mm M3x10mm Nylon Hex Standoff Black(10pc)
By RCTimerThe Rctimer M3x8mm M3x10mm Nylon Hex Standoff Black(10pc) is a pack of black nylon hex standoffs for mounting multirotor control boards. The quantity is 10Pcs, with listed sizes of M3x8mm and M3x10mm for this component mounting hardware.
Explore product ↗industryM5 M6 Aluminum Flange Lock Nut
By RCTimerThe RCTimer M5 M6 Aluminum Flange Lock Nut is an ultra-light aluminum fastener for airframe customization and securing propellers. Supplied in a quantity of 10 pieces, it offers M5 and M6 options, five colors, and respective unit weights of 0.6g and 0.95g.
Explore product ↗industryMicro Deans Knockoffs OT04 (10pcs)
By RCTimerRctimer Micro Deans Knockoffs OT04 (10pcs) is a 10-piece micro connector pack for applications below 12 Amp. Each connector pair weighs 0.8g. Intended applications include Slow and Park Flyers and 1/18 scale Micro cars.
Explore product ↗industryRctimer Mini BLHeli OPTO ESC20A (OneShot125)
By RCTimerThe Rctimer Mini BLHeli OPTO ESC20A (OneShot125) is a compact multicopter electronic speed controller with BLHeli 14.1 firmware, enabled OneShot and damped light, and a 20A output specification. It accepts 6-16.8V from 2-4S LiPo batteries, measures 23*12*4.5mm and weighs 2.0g without wires. No BEC is included.
Explore product ↗industryRctimer Mini ESC20A OPTO SimonK Firmware
By RCTimerThe Rctimer Mini ESC20A OPTO SimonK Firmware is a compact multicopter electronic speed controller with a 20A output and 6-16.8V input for 2-4S LiPo batteries. It uses SimonK firmware and twisted-pair throttle wiring, measures 23 × 12 × 4.5mm, and weighs 6.0g with wires. No BEC is included.
Explore product ↗