GEP-F722-35A AIO (F722 FC 35A 2-6S 8bits BLS ESC 25.5mm)
By GEPRCThe GEPRC GEP-F722-35A AIO is a compact flight-controller and ESC electronics package for UAV integration. It combines an STM32F722 controller, five UARTs and a DJI air-unit connector on an 8.8g board. It accepts 2~6S LiPo input, provides 35A continuous current and uses a current mounting pattern of 25.5×25.5mm.
Explore product ↗industryGEPRC GEP-F722-45A AIO V2
By GEPRCThe GEPRC GEP-F722-45A AIO V2 is an integrated flight controller and ESC board for drone builds. It combines an STM32F722 processor, 42688 motion sensing, five UART ports and a DJI Air Unit connector in a 32x32mm package, supplied with power and connection accessories.
Explore product ↗industryGEP-F722-BT-HD V2 Flight Controller
By GEPRCThe GEPRC GEP-F722-BT-HD V2 Flight Controller combines an STM32F722RET6 MCU, SPI-connected 42688-P IMU and 512MB onboard SD card. This 36x36mm controller includes Type-C USB, five UARTs, BetaFlight OSD and integrated LC filtering, with LiPo 3-6S input and 5V 3A / 12V 3A BEC outputs.
Explore product ↗industryGEP-F722-BT-HD V3 Flight Controller
By GEPRCThe GEPRC GEP-F722-BT-HD V3 is a compact UAV flight controller built around an STM32F722 processor and ICM42688-P IMU. It combines onboard logging, a barometer, OSD and DJI Air Unit connectivity in an 8.2 g board supplied with mounting hardware and cables. The current batch lacks Bluetooth wireless parameter tuning.
Explore product ↗industryGEPRC GEP-GR1106 4500kv Motor
By GEPRCThe GEPRC GEP-GR1106 4500kv Motor pairs a compact 9N12P architecture with recommended 2-3 inch propellers and 3-4S batteries. It measures Φ14.2*14mm and uses N50SH arc magnets, NSK bearings and an Al6061 base casing. Weight figures conflict at 7.1g and 6.8g excluding wire; pulling-force figures also differ.
Explore product ↗industryGEPRC GEP-GR1206 3600/4500/6000/7500kv Motor
By GEPRCThe GEPRC GEP-GR1206 is a micro-FPV quadcopter brushless motor available in four KV versions. Its 9N12P architecture combines N52H arc magnets, NMB 520 bearings and a 7075 aluminum base casing. It weighs 8.3g including wire, with propeller and battery recommendations varying by KV selection.
Explore product ↗industryGEPRC GEP-GR1408 3750kv Motor
By GEPRCThe GEPRC GEP-GR1408 3750kv Motor is a compact brushless propulsion component designed for 3-inch propellers and optimized for 4S LiPo operation. It combines a CNC-machined 7075 aluminum body, N52H curved magnets, NSK bearings and a ventilated bell, with an M5 propeller adapter thread and 100mm electrical leads.
Explore product ↗industryGEP-GR2207 2400kv motors
By GEPRCThe GEPRC GEP-GR2207 2400kv is an individual motor intended for freestyle flight with 4–5S LiPo power. It combines a 22 × 7mm stator, hollow 4mm shaft, NSK bearings and an Al 7075 casing. Supply includes a lock nut and mounting screws; stated motor weights differ between 31g and 32g.
Explore product ↗industryGEP-GR2207 2700kv motors
By GEPRCThe GEPRC GEP-GR2207 2700kv is an individual racing-oriented propulsion motor with a 22mm-diameter, 7mm-long stator, hollow 4mm shaft and CNC-machined 7075 aluminum casing. It accepts 4~5S LiPo power and includes an M5 aluminum lock nut and mounting screws. Motor dimensions are Φ26.7*30.5mm; weight entries differ.
Explore product ↗industryGEP-GR2306 1600kv motors
By GEPRCThe GEPRC GEP-GR2306 1600kv propulsion motor is suitable for 6–7 inch propellers and long-range flight. It combines a 12N14P configuration, hollow 4mm shaft, 7075 aluminum body and N52H arc magnets. Motor weight is 32g excluding wire; LiPo cell-count entries differ between 3~6S and 4~6S.
Explore product ↗industryGEPRC GEP-GR2306 2450kv Motor
By GEPRCThe GEPRC GEP-GR2306 2450kv Motor is a freestyle propulsion component with a 12N14P configuration, hollow shaft, 7075 aluminum construction and NSK bearings. It weighs 32g, supports 3~5S LiPo input, and is recommended for use with a 4S battery and 5–6-inch propellers.
Explore product ↗industryGEP-LC7 Frame
By GEPRCThe GEPRC GEP-LC7 Frame, also named Crocodile7, is a carbon-fiber airframe kit for long-range FPV builds using 6-inch or 7-inch propellers. Its 315mm layout provides multiple video mounting options, a dedicated GPS position and stack space. Supplied parts include frame components, TPU protection and hardware; listed plate thicknesses conflict.
Explore product ↗