XAG P100 Pro vs DJI Agras T50 Procurement Guide
Compare farm spray and spreading modules, material limits, field power and transport needs for two agricultural aircraft.
For farms that spend much of the day refilling at a single field entrance, evaluate the P100 Pro first. Its 50 L spray tank can carry more water per fill than the 40 L tank on the Agras T50, provided the load stays within the applicable mass limit. For a contractor already running DJI agricultural equipment, assess a complete T50 kit against the existing service and charging arrangements. For dry fertilizer or seed, both spreading systems carry up to 50 kg. The more useful distinctions are hopper volume, compatible granule size and how evenly each unit distributes the farm's material.
Compare the application equipment
| Part | What to look for | Matching products |
|---|---|---|
| Liquid load | P100 Pro RevoSpray 3 holds 50 L with a 50 kg rated load. T50 holds 40 L with a 40 kg operating payload. | |
| Liquid delivery | P100 Pro reaches 22 L/min. T50 reaches 16 L/min with two sprinklers or 24 L/min with four. | |
| Published spray width | P100 Pro lists 5–10 m depending on operating conditions. T50 lists 4–11 m at 3 m above crops. | |
| Dry hopper | RevoCast 3 holds 80 L and takes 1–6 mm granules. T50 holds 75 L and takes dry granules of 0.5–5 mm. Both list 50 kg. | |
| Published spread width | RevoCast 3 lists 3–7 m. T50 lists 8 m. Verify coverage with the intended seed or fertilizer. | |
| Battery identification | P100 Pro global specifications list B13960S, 20,000 mAh and 962 Wh. T50 uses DB1560, 30,000 mAh and 52.22 V. |
Send this list as it is and get one price for every part.
Quote the full parts list →A farm buying for the first time should ask for separate packing lists for spraying and spreading. A tank quoted in litres gives a volume, while the rated payload in kilograms sets a mass limit. Both figures matter. A bulky seed lot may fill the hopper well before the scale reaches 50 kg. A dense material may reach the mass limit with space still visible above it. Have the farm weigh a known volume of the intended material before estimating how many bags a crew can load at each stop.
Choose for the work that occupies the crew
On a farm with large adjacent plots, a larger liquid tank may reduce visits to the refill point. Look at last season's records for the number of fills and the minutes spent waiting for water. If the tender vehicle was frequently empty when the aircraft returned, ask how the larger tank would change the vehicle's own refill schedule. For widely separated small fields, time spent folding, securing, unloading and preparing the aircraft again may dominate the day. Have the people who drive the vehicle try that sequence with both machines.
The T50's published maximum liquid flow depends on the installed sprinklers. DJI lists 16 L/min with two and 24 L/min with four. A proposal citing the higher value should identify the additional sprinkler equipment on the packing list. XAG lists 22 L/min for the P100 Pro's RevoSpray 3 system. For both offers, ask the agronomist which approved crop jobs actually need the proposed equipment. An attachment that only serves a small portion of the season can be itemized separately so the buyer can decide which crews need it.
For seed and granular fertilizer, start with the product the cooperative buys most often. Check the supplier's size distribution, including fines, against the spreader's specified material range. Ask for an evenness check using that product and a record of the material collected across the test area. The RevoCast 3 maximum of 150 kg/min was measured with urea. DJI lists a maximum of 108 kg/min for the T50 spreading system. A mass discharged in a minute gives no direct measure of uniformity across a strip or of the number of fields a crew will finish before dark.
Evaluate a representative field day
Bring the farm manager, operator and person responsible for loading to a demonstration. Use clean water for the liquid-handling trial and an appropriate dry farm material for the spreading trial. Record setup, filling, field work, battery changes, cleaning and packing as separate activities. Start the clock when the vehicle reaches the gate and stop it when the equipment is ready to move. This captures time the farm pays for even while the aircraft is standing still.
Need a quote for this? Tell us what you need →
Ask to see how the operator reviews the field boundary and terrain information on the supplied controller. XAG specifies imaging radar and a separate terrain radar. DJI specifies forward and rear phased-array radar with binocular vision. Walk the intended work area with the operator and identify places that need to be excluded, such as overhead services and field margins beside occupied buildings. Record whether the crew can review and revise those exclusions on the delivered setup. Compare visibility of the screen from the loading point and the clarity of the status information during a normal job.
Buy compatible modules and field power
Name RevoSpray 3 and RevoCast 3 individually in a P100 Pro inquiry. For T50, name the spray configuration and T50 spreading system separately. Request the parts needed for a changeover and a demonstration by the person who will maintain the equipment. Check where a removed module rests, how its connectors are protected and how the crew keeps dry material away from rinse water. A contractor offering both services on the same day needs enough clean, secure storage on the vehicle for the second module.
Compare complete charging stations. XAG's global P100 Pro specification lists the B13960S pack and CM13600 charger. That charger has different published output ratings on different mains supplies, so a plug adapter alone tells the buyer little about turnaround. DJI specifies the DB1560 battery for the T50. Ask for the matching charging equipment, leads and any cooling equipment included in the offer. Have the farm's electrical contact review the input requirements against the power available where the crew actually loads.
Assign someone to record when a used pack returns, when it is ready for charging and when it is ready for issue again. Repeat across several cycles under representative conditions. Compare the queue of waiting batteries with the queue at the refill point. This reveals whether the next purchase should be more packs, additional charging capacity or better water handling. A single fast charge demonstrated with a prepared pack gives little insight into the busiest hour of a field day.
Check whether the field vehicle can carry the charging equipment once the second module and cleaning supplies are aboard. Have operators load the vehicle in departure order and unload it in working order. If the first item needed at the gate is buried beneath a full shift's supplies, revise the packing plan during the trial. Include any racks or restraints that the crew relied on in the final equipment list.
Specify the destination, shipment and handover
Request the market version of the aircraft, controller, battery, charger and all application modules. Include the destination supply voltage, plug, intended language for training and who can service each major assembly. Ask for the exact replacement part numbers for the items the local technician expects to consume during the first season. Where a farm already owns equipment from the same manufacturer, record its model numbers and obtain confirmation for each proposed pairing before counting those parts toward the new kit.
Arrange battery freight from the actual labels. XAG lists 962 Wh for the B13960S. DJI identifies the DB1560 as a 30,000 mAh pack at 52.22 V. Ask for the manufacturer's transport documents and the watt-hour marking on the packs being shipped. Supply the freight specialist with the number of packs, whether they travel separately or with equipment, the origin, destination and proposed route. Obtain written carrier acceptance and packing instructions before arranging collection, including a separate process for any future return of a damaged pack.
At handover, have the receiving crew identify each module, verify the pack and charger labels and complete the clean-water and dry-material checks agreed with the supplier. Keep the resulting weights, coverage observations and turnaround times with the delivery record. For a configuration inquiry, contact our team with the crop work, intended granular materials, field layout, available power, destination and number of crews. Those details make it possible to compare two complete field systems on the same terms.
Frequently asked questions
Which carries more liquid?
P100 Pro has a 50 L tank and 50 kg rated spray load. T50 has a 40 L tank and 40 kg operating payload. Check the allowed load for the site.
Does every T50 spray kit reach 24 L/min?
The four-sprinkler configuration has that maximum. DJI lists 16 L/min for the two-sprinkler setup.
Which hopper carries more seed?
Both allow up to 50 kg. The 80 L RevoCast 3 may hold more of a low-density seed than the 75 L T50 hopper before reaching the volume limit.
Can published discharge rates predict daily output?
Estimate daily output from a representative field trial that includes loading, charging, material coverage and movement between fields.
What should a battery freight inquiry include?
Provide pack models, label photographs, quantities, packing arrangement and route so the carrier can assess the consignment and specify documentation.