ChinaDroneRequest a quote →

SIYI ZR10 vs SIYI ZR30 | Optical Gimbal Procurement Guide

Updated · 9 min read

Compare optical reach, mounting clearance, lot-specific power limits, recording media and video interfaces for inspection payloads.

Choose the SIYI ZR10 for a weight-sensitive inspection platform when a 10x optical lens and an Ethernet video connection meet the brief. Evaluate the ZR30 first when the inspector needs tighter optical framing, the client requests a 4K original, or the existing video equipment takes HDMI. One measurement can save considerable integration work. Check the space between the proposed mounting face and the ground with the vehicle resting on its landing gear. The ZR30 specification includes its quick-release board and gives a height of 180 mm.

Compare the two payloads

SIYI ZR10 vs SIYI ZR30 procurement comparisonDimensions refer to the manufacturer's stated assemblies. Optical field of view uses the horizontal axis.
PartWhat to look forMatching products
Envelope and massZR10: 121 by 101 by 78 mm, 381 g. ZR30: 132 by 100 by 180 mm, 668 g including quick-release board.
Lens and sensorZR10: 10x optical, 30x hybrid, 4 MP. ZR30: 30x optical, 180x hybrid, 8 MP.
Horizontal field of viewZR10: 71.5 to 6.7 degrees. ZR30: 58.1 to 2.1 degrees, wide to full optical zoom.
RecordingZR10: 2560 by 1440 at 30 fps. ZR30: 4K at 25 fps, with 4096 by 2160 on the product spec page and 3840 by 2160 in the v1.4 manual. Verify delivered file dimensions.
Video outputsZR10: Ethernet. ZR30: Ethernet and Micro-HDMI.
PowerZR10 averages 4 W. ZR30 averages 5 W. Both list 12 W peak.
SupplyBoth list 11 to 25.2 V on current sheets. Pre-June 2023 ZR10 lots specify 11 to 16.5 V.
Pitch and yaw travelZR10: pitch -135 to +45 degrees, yaw ±160 degrees. ZR30: pitch -90 to +25 degrees, yaw ±270 degrees.
Storage and temperatureClass 10 microSD limits are 32 GB for ZR10 and 128 GB for ZR30. Both specify operation from -10 to 50 °C.
Control interfacesBoth list S.Bus, UART and Ethernet UDP/TCP. Confirm which commands the intended ground station exposes.
Mounting hardwareZR10 documentation lists a mounting board and dampers. ZR30 uses a quick-release board that SIYI lists at 38 g.
Ingress documentationThe ZR10 specification page gives no IP rating. SIYI lists IP4X for ZR30. The rating provides no water-ingress grade.

Send this list as it is and get one price for every part.

Quote the full parts list →

The listed weights differ by 287 g. The installed difference depends on the mounting hardware, cable assemblies and any video conversion equipment each build needs. If the vehicle already exists, have the workshop weigh the components being removed and the proposed replacement assembly. If it is a new design, reserve room for the connector body and the bend in the cable. A camera that fits inside the drawing outline can still pull against its video lead as it moves.

Decide how much optical reach the job needs

Consider a building inspector who needs a picture of a damaged joint and enough surrounding masonry to identify it later. The ZR10 has a wider horizontal view at its wide end. That is useful when a drawing shows several similar joints and the inspector must establish which one appears in the close view. Its 2K recording may already show the defect at the approved inspection position. Ask the person signing the report to review an original frame at the intended print size.

For a roof or tower photographed from a prescribed observation point, the ZR30 offers a narrower view at full optical zoom. Its quoted horizontal field there is 2.1 degrees, compared with 6.7 degrees for the ZR10 at the end of its optical range. The narrower view can reveal a smaller portion of the structure in more detail. It also makes movement more apparent. Ask for a short sequence taken on the proposed mount so reviewers can see how many consecutive frames are usable.

The large hybrid zoom numbers combine optical reach and digital enlargement. Write the acceptance requirement around a feature a reviewer can actually distinguish, such as the edge of a seal or letters on a maintenance placard. Use an example at the expected distance with typical site lighting. Save the wide establishing image and the detail image as a pair. An order that specifies only maximum magnification gives the buyer little basis for judging the delivered result.

Follow the image from the camera to the desk

ZR10 has an Ethernet video output. ZR30 adds Micro-HDMI, which matters when the existing recorder or video transmitter expects an HDMI input. Draw the connection for the proposed kit from the camera to the operator's screen and mark the input on every intermediate device. An Ethernet socket intended for configuration may serve a different purpose from an input intended to receive camera video. Request evidence that the exact receiver and display combination can show a live image after a normal restart.

Separate the display trial from the recording trial. A monitor may show a perfectly usable preview while an editor needs a higher-resolution original from the camera card. SIYI's ZR30 product page specifies 4096 by 2160 at 25 fps, while its v1.4 manual lists 3840 by 2160 at the same frame rate. If the client specifies a frame size, ask for an untouched clip from the offered unit and firmware. Have the editor verify the pixel dimensions and cadence before writing either into the order.

Need a quote for this? Tell us what you need →

Both cameras list S.Bus, UART and Ethernet control. Specify who needs to move the camera, change zoom, begin recording and confirm a clip was saved. A live image verifies just one part of that workflow. SIYI documents its FPV application and lists the HM30, MK15 Enterprise and MK32 in its integration guidance. The manuals identify the power, video and control cables. Check the cable list against the air unit and available inputs. When reusing a third-party ground station, identify its version, the air unit and the control interface. For an ArduPilot or PX4 installation, request a demonstration of the required commands with the exact firmware combination proposed for delivery.

Check power, media and mounting hardware

The most consequential distinction within the ZR10 line is its production lot. SIYI specifies an upper input limit of 16.5 V on early units manufactured before June 2023. The later specification extends to 25.2 V. Ask for written lot identification when buying replacement cameras for a common power harness. A receiving technician should be able to read the approved supply range for a particular unit from the asset register without guessing from its model name.

SIYI gives average and peak consumption separately. Use the peak figure when checking the capacity available at the payload connector and include equipment sharing that supply in the review. The one-watt difference in listed average consumption tells you little about a restart that happens only when the whole camera assembly is operating. Ask the integrator to show that the camera, video link and recorder stay available through the power cycles expected in regular service.

Order cards by camera model. The ZR10 specification lists Class 10 microSD media up to 32 GB, while the ZR30 lists up to 128 GB. Have the team record, stop, remove the card and open the final clip on the computer used for archiving. Repeat with the spare card that will travel in the kit. For work shared across shifts, label the card wallets so the crews can return each card to the camera for which it was accepted.

The ZR30 quick-release board is included in its published dimensions and weight. Ask what remains on the vehicle when the camera comes off and which pieces must accompany a replacement payload. For the ZR10, obtain a drawing of the mounting assembly actually offered. Evaluate travel with the housing, landing gear and cables in place. The two models have different pitch and yaw limits, so an orientation that works for one installation deserves a separate check on the other.

Put the accepted build on the order

SIYI lists both gimbals in its camera range. The reviewed manufacturer materials give no end-of-sale notice for either model. The ZR30 has a different lens, mounting envelope and output selection, so a swap for an unavailable ZR10 requires engineering review. Ask for the version supplied, included cables, board drawings and the process for obtaining a matching spare. For mixed lots, record the ZR10 voltage limit against the individual unit before it enters stores.

For a vehicle with a removable payload, include the changeover in the workshop trial. Ask a second technician to fit the spare from its carrying case and produce a usable clip. Record which screws, tools and cables had to move with it. That list determines whether a spare camera on the shelf is sufficient to return the vehicle to inspection work.

Use one payload as the acceptance sample. Keep a photograph of its installation, its original inspection clip, the card model, a list of controller functions that worked and the identity of the display used for the trial. This gives the service team a way to distinguish a faulty replacement from a kit delivered with a different cable or setting. For an inquiry, send our team the available clearance, installed mass allowance, power supply, video input and one example of the detail your client needs to see.

Frequently asked questions

Can an HDMI-only recorder take ZR10 directly?

ZR10 provides Ethernet video. ZR30 has a Micro-HDMI output. Verify the recorder accepts the proposed output mode.

Is every ZR10 suitable for a 6S supply?

No. Early lots have a 16.5 V upper limit. Obtain the unit's production information before approving the power arrangement.

Which camera offers the wider overview?

ZR10 lists a 71.5-degree horizontal view at the wide end, compared with 58.1 degrees on ZR30.

Can one 128 GB card serve either camera?

That capacity falls within the ZR30 specification. SIYI lists 32 GB as the maximum for ZR10.

What does IP4X establish for ZR30?

The first digit refers to solid-object ingress. The X gives no water-protection rating. Ask for separate evidence if the contract requires water resistance.