RadioMaster Boxer vs RadioMaster TX16S MKII: Choosing a Fleet Radio
Match receiver protocols, screens, physical controls and power accessories to the pilots who will use a Boxer or TX16S Mark II.
Buy the Boxer for a pilot who wants full-size sticks in a compact field kit and makes few changes to a model after setup. Give the TX16S Mark II the first trial for an instructor who spends much of the day explaining model settings or a pilot who needs two accessible side sliders. Either can be a sensible fleet radio. Start with the receivers already installed in the aircraft. A radio that feels right in the hand can still be the wrong order if its internal module cannot talk to those receivers.
Compare the standard Mode 2 radios
| Part | What to look for | Matching products |
|---|---|---|
| Screen | Boxer has a 128 × 64 monochrome LCD. TX16S Mark II has a 480 × 272 color touchscreen measuring 4.3 inches. | |
| Control layout | Boxer includes a programmable six-position control. TX16S Mark II includes side sliders and rotary knobs with center detents. | |
| Internal RF choices | Boxer lists ELRS, CC2500 and 4-in-1 order variants. TX16S Mark II offers ELRS or 4-in-1. Check regional variants. | |
| Gimbals | Boxer comes with full-size V4.0 Hall gimbals and supports an AG01 upgrade. TX16S Mark II offers V4.0 Hall or AG01 configurations. | |
| Expansion and firmware | Both use EdgeTX and provide a JR-compatible external module bay. | |
| Channels | Each supports up to 16 channels depending on the receiver. |
Send this list as it is and get one price for every part.
Quote the full parts list →On paper the two radios have much in common, including EdgeTX and a JR-compatible external module bay. In the hand, the screen and the position of the controls change how a pilot uses them. A useful trial takes place in two settings. First, sit at the bench and set up a model while someone else follows along. Then put the radio on its strap and use the assigned controls while looking ahead. The radio that makes the first exercise easier may feel more cumbersome during the second.
Choose for the pilot and the model
Consider a pilot carrying a quad, goggles and tools to a club flying site. Once the model is configured, that pilot may use the screen mainly to select a model and check settings before putting on the goggles. The Boxer's monochrome display is a reasonable fit for that routine. RadioMaster includes a carry case and a gimbal protector with the standard Boxer. Try the complete kit in the pilot's usual bag. A removable gimbal protector only does its job if there is room to carry the radio with it fitted.
At a teaching bench the priorities change. A student needs to see which model is active, follow a menu change and repeat the operation without prompting. The TX16S Mark II's 4.3-inch color touchscreen gives instructor and student more room to view the same page. Put the radio where it will actually sit, with the trainer and student on their usual sides of the desk. Check whether both can read it and whether touching the display moves the radio around. This is a more relevant classroom test than comparing photographs of the screens.
For a glider club, write down which functions require proportional adjustment and which need a repeatable switch position. The TX16S has left and right side sliders with center detents. Ask a pilot to find the center by feel while maintaining a normal grip on both sticks. For a model that uses discrete selections, try the Boxer's programmable six-position control instead. Have different pilots describe which position they selected without looking down. Their answers will tell you whether the proposed control assignment belongs on the club's standard setup sheet.
Match the radio module to the receivers
Build a receiver list before requesting a particular transmitter version. Record the model label, protocol, frequency band and any known firmware or regional setting for each receiver family. Group aircraft that can use the same configuration. If most use compatible 2.4 GHz ExpressLRS receivers, consider the internal ELRS version of either handset. If the group owns several older receiver families, check each one against the multiprotocol variant being offered. The words “2.4 GHz” describe a frequency band and leave the question of protocol compatibility open.
Need a quote for this? Tell us what you need →
The Boxer ordering page distinguishes ELRS, 4-in-1 and CC2500. A request for a “multiprotocol Boxer” leaves two possible interpretations, particularly when buyers are looking at different regional versions. Record the exact variant against the receiver list. The TX16S Mark II offers internal ELRS or 4-in-1. For either radio, ask the supplier to identify the regional version on the order and demonstrate the intended pairing with a representative receiver. Put that receiver's model number on the acceptance record so another department can reproduce the check.
An external module can give an existing radio another role, but it changes the kit the pilot handles. Both radios have a JR-compatible bay. Check the proposed module's mechanical fit, power requirements and firmware support on the chosen radio. Test it with the battery and carry case you intend to issue. If a club shares one external module across several radios, specify where it is stored and who takes it to the field. Two pilots flying at once cannot share the same physical module.
Specify power, gimbals and the field kit
The Boxer takes a suitable two-cell lithium-polymer pack or two 18650 lithium-ion cells. Its standard package includes an 18650 tray, with the cells supplied separately. Ask someone to unpack the proposed kit and point out exactly what powers it. Treat a radio body, a battery holder and a ready-to-use power source as separate entries when comparing offers. For TX16S orders, identify the pack or holder being supplied and check fit and charging instructions for that exact combination.
RadioMaster lists V4.0 Hall gimbals and an AG01 option for the standard TX16S Mark II. The standard Boxer has V4.0 Hall gimbals and can be upgraded to AG01. If a pilot reports a preference during a trial, record which gimbals were fitted and how the sticks were adjusted. A showroom sample with different springs or stick height can skew the decision. Have a thumb pilot and a pinch pilot each reach the controls with their usual grip before standardizing the purchase across a group.
Decide what happens when a radio changes hands. Save the approved model configuration, photograph the assigned controls and attach a plain-language control map to the field case. On the spare radio, restore the configuration and verify each function with the propulsion system disabled. Check direction, travel, switch position and the indicated model name. A shared operating system helps with training, but switch assignments still need review when the physical layout changes.
Use a sample order to settle the choice
For a school buying several radios, run a handover exercise. Give one instructor the written setup and ask another to take over halfway through a bench session. Record which steps require them to ask the first instructor a question. If most of the delays come from finding settings on screen, try the TX16S on the same exercise. If the setup is already quick and the problem is carrying several radios between sites, repeat with the Boxer packed alongside the rest of the class equipment.
Include left-handed pilots and anyone who uses a different stick mode in the trial. Hand them the radio with the intended strap and ask them to adjust it without disturbing their grip. Record which controls they can reach comfortably. If two groups need different setups, mark the case with the stick mode as well as the receiver family so that the right radio reaches the right pilot at checkout.
Agree what counts as an acceptable spare before signing the order. It should power up with an issued pack, select the correct model and operate the required receiver and controls using the instructions in its case. If a substitution changes the module, gimbals or stick mode, review it against those same checks. For an itemized inquiry, send our team your receiver list, control assignments, preferred stick mode, destination and number of pilots working at once. Include photographs of any external modules or packs you intend to keep.
Frequently asked questions
Which radio suits an instructor demonstrating settings?
Try the TX16S Mark II first. The color touchscreen gives two people a larger shared view during setup.
Is the Boxer CC2500 the same order as the 4-in-1?
They are distinct RF variants. Match the receiver protocol and regional version before choosing either.
Do both radios support an external module?
Yes. Both have a JR-compatible bay. Check the specific module and test the complete assembly.
Does the standard Boxer include 18650 cells?
RadioMaster lists a tray in the package. Order suitable cells separately or specify an appropriate pack.
Can a spare radio use our existing model setup?
Review the physical control assignments and receiver pairing, then test the model on the spare before issuing it.