ChinaDroneRequest a quote →

DJI O4 Air Unit vs DJI O4 Air Unit Pro Procurement Guide

Updated · 8 min read

Select an O4 video unit for a small FPV trainer or filming quad. Compare installed weight, power input, recording modes, storage and headset compatibility.

Choose the standard DJI O4 Air Unit when the frame has little room for a camera and transmitter, or when the buyer needs a light indoor practice quad with onboard video. Choose the O4 Air Unit Pro when the camera will deliver footage for an editor who needs high-frame-rate 4K, a grading profile or removable media. Both deliver a digital view to compatible goggles. A useful purchase specification begins with the space and power available on the aircraft and ends with how the recorded clip reaches the editor.

Compare the parts that go on the aircraft

DJI O4 Air Unit vs DJI O4 Air Unit ProDJI lists antenna weights separately. Weigh a complete fitted assembly before approving a frame configuration.
PartWhat to look forMatching products
Camera and recordingStandard O4 uses a 1/2-inch sensor and records up to 4K/60 fps. Pro uses a 1/1.3-inch sensor and records up to 4K/120 fps, with a 10-bit D-Log M option.
Weight with cameraStandard is about 8.2 g without the lens mount or 9.2 g with it. Pro is about 32 g with camera.
Transmitter envelopeStandard measures 30 × 30 × 6 mm. Pro measures 33.5 × 33.5 × 13 mm.
Power inputStandard accepts 3.7–13.2 V. Pro accepts 7.4–26.4 V.
StorageStandard has 23 GB internal and no microSD slot. Pro has 4 GB internal and takes microSD cards up to 512 GB.
Camera cableStandard has a 50 mm coaxial cable. Pro has a 130 mm coaxial cable.

Send this list as it is and get one price for every part.

Quote the full parts list →

DJI points buyers of small frames toward the standard unit and identifies larger frames as candidates for Pro. Propeller size is only a starting point. Two frames sold in the same size class can leave different amounts of space behind the camera or above the flight controller. Ask for the drawing of the specific frame revision, including camera side plates and top plate. For a prebuilt quad, ask for a photograph of the actual assembly with the camera set to its working angle.

Decide whether the installation fits the job

For a club ordering a set of small trainers, weigh one complete aircraft as it will enter the classroom. The standard unit's headline weight excludes its lens mount, and both variants need parts beyond the camera and transmitter. Include the antenna equipment, brackets, cables and fasteners the builder proposes. Compare the resulting mass with the limit set for that trainer. Put the complete list in the order so that a change of bracket on the production batch gets reviewed before it changes the finished aircraft.

Camera placement deserves its own check on a filming quad. A transmitter can fit beneath the top plate while the lens sits too far back behind the front of the frame. Ask for a sample clip in the intended camera mode and look closely at the corners for guards or frame parts. Check that an operator can reach the recording media or data connection after the canopy is fitted. Removing several body screws after each session can turn a workable prototype into an awkward production kit.

The two units also have different power requirements. Give the integrator the manufacturer's input range for the exact unit ordered and ask them to identify the supply used on the proposed aircraft. A description such as “compatible with digital video” leaves that question open. Have the builder confirm the match across the aircraft's normal battery operating range and document the completed installation. For a replacement order, check the power arrangement again if a different revision of the trainer or filming quad is being supplied.

Choose recording features with the editor

For training footage, a normal-speed 4K file from standard O4 may already exceed what the instructor needs to review a circuit or show a student where a turn began. Request a short lesson clip and play it on the classroom computer. Check whether a student can distinguish the features the instructor refers to and whether the computer can move through the file smoothly. If that workflow passes, extra capture modes add little to this particular order.

Need a quote for this? Tell us what you need →

Pro is the better candidate for a filmmaker who has to slow a shot substantially or match it to graded material from other cameras. Its 4K/120 fps option gives the editor more captured frames to spread across a slower sequence. The 10-bit D-Log M option gives the colorist another starting point. Ask for footage from the exact combination of settings intended for the job. Review the result after stabilization, cropping and export to the delivery format, since the final composition may differ from what the pilot saw.

For an interior walkthrough, compare clips from a bright doorway into a darker room using a representative route and the client's requested framing. Look at detail in the shaded portion, bright surfaces near the door and changes in exposure as the camera turns. The Pro sensor is larger, but a sensor specification cannot establish whether the footage meets a client's brief. Let the editor choose from labeled original files and keep the chosen settings with the accepted sample. This makes future repeat orders easier to evaluate.

Plan media and accessory compatibility

Storage changes how the crew works between takes. Standard O4 has more internal capacity than Pro, but the crew must offload its recordings before reusing that space. For an event with several short sessions, time a real transfer to the laptop that will be on site. Allow for checking the copied files and identifying the aircraft they came from. If the laptop travels with a different operator, decide where and when the aircraft will be available for that handover.

Pro lets the crew exchange microSD cards. Specify cards suitable for the recording mode, a reader the editor can use and a place to keep full cards apart from empty ones. Test a sustained recording on the proposed card, then check playback at the beginning and end of the file. Pro's internal storage is modest compared with the standard unit. Give the pilot a way to confirm where the last take was saved before the aircraft goes to the next crew.

Write down the goggles and radio models already in use. DJI lists both air units with Goggles 3 or N3 paired with DJI FPV Remote Controller 3. For Goggles 2 or Integra, the DJI radio pairing uses FPV Remote Controller 2. A separate third-party radio arrangement requires a suitable receiver. Ask for the configuration that matches each kit. A school that owns two generations of headsets may need more than one labeled ground kit even if all aircraft use the same air unit.

The Pro camera accepts DJI's Avata 2 ND filter set. For a crew that already owns those filters, try one on the assembled aircraft and confirm that the mount still protects the camera and the image stays clear at the edges. Specify the exact camera module and cable when ordering spares. The standard and Pro cable lengths differ, and a photo showing the connector alone gives the buyer little basis for accepting a substitute. Keep a photograph of the approved parts alongside their identifiers.

Accept a sample before ordering matching units

Ask the builder to demonstrate a typical full work cycle with the sample aircraft, including preflight preparation, recording and file transfer. Check that the pilot sees the expected live image with the assigned goggles and that the saved master meets the editor's request. If a club also uses racing mode, test that use separately. DJI describes a fixed recording and transmission format in racing mode, so evaluate the production recording in the mode that will actually be used for filming.

Record the frame revision, camera and transmitter model, fitted weight, storage arrangement and firmware versions in the acceptance notes. For overseas orders, identify the destination and confirm which party handles service for a failed module and whether the aircraft must be returned with it. Contact our team with the frame drawing, available supply, goggles and radio inventory, and an example of the video you need to deliver. Include the number of working aircraft and the parts you want to hold as spares.

Frequently asked questions

Which unit should we sample for a small indoor trainer?

Start with standard O4. Check the complete fitted weight and dimensions against the trainer frame, including the camera mount and antenna.

Which one can record a 4K slow-motion master at 120 fps?

Select Pro for that requirement. Ask the editor to check a file captured with the intended field of view and color settings.

Can an operator swap cards on the standard unit?

No. Standard O4 records internally. Plan time and access for copying files. Pro supports removable microSD media.

Can we retain Goggles Integra for either unit?

Yes. DJI lists Goggles Integra for both. If using a DJI radio with that headset, the specified pairing uses DJI FPV Remote Controller 2.

Which model takes our Avata 2 ND filters?

DJI lists the Avata 2 ND filter set for the O4 Air Unit Pro camera. Check filter clearance in the actual frame before counting the set as shared stock.