DJI Mavic 3T vs DJI Matrice 30T: Procurement Guide
Choose a thermal inspection aircraft by comparing normal image resolution, weather limits, aircraft weight, field power and dock compatibility.
Choose the DJI Mavic 3T for a walking inspection when one person must carry the aircraft, controller and spare power between buildings. Choose the DJI Matrice 30T for evaluation when the job calls for a weather-rated aircraft, an integrated laser rangefinder or a vehicle-based crew that can support paired batteries. Both produce a 640 × 512 thermal image in normal operation. If the tender asks for more thermal detail, examine the source files before assigning extra credit to the larger aircraft.
Compare the aircraft as they will be delivered
| Part | What to look for | Matching products |
|---|---|---|
| Aircraft weight | Mavic 3T is 920 g with propellers and no accessories. M30T is 3,770 ± 10 g including two batteries. | |
| Maximum flight time | Mavic 3T reaches 45 min with its standard pack and propellers, or 36 min with the EU C1 pack and low-noise propellers. M30T is rated for 41 min. | |
| Thermal images | Mavic 3T records 640 × 512. M30T records 640 × 512 in normal mode or 1280 × 1024 in super-resolution mode. | |
| Weather and temperature | DJI describes the Mavic series here as unsuitable for water exposure and specifies −10 to 40 °C for operation. M30T carries an IP55 rating and operates from −20 to 50 °C. | |
| Distance measurement | Mavic 3T has wide, telephoto and thermal cameras. M30T adds a laser rangefinder rated for 3–1,200 m on DJI's specified reference surface. | |
| Field power | Mavic 3T uses one flight pack and supports the Mavic 3 100 W charging hub. M30T uses paired TB30 batteries and the BS30 station. |
Send this list as it is and get one price for every part.
Quote the full parts list →The weights in the table describe the aircraft in the configurations DJI specifies. For a roof inspection, weigh the bag the technician actually carries up the stairs, with spare batteries, controller, cards and any required accessories. For a crew working from a van, measure the shelf space taken by the charging station and the clearance needed to remove packs. Those measurements tell the buyer more about daily use than a comparison of folded airframes alone.
The model suffix also matters. This comparison covers the original Mavic 3T. DJI separately specifies a Mavic 3T Advanced with a different thermal lens. An offer for the Advanced model needs its own sample images because a different field of view changes what appears in a frame from the same observation point. On the Matrice side, specify M30T when thermal imaging is part of the job. The standard M30 omits the thermal camera.
Match the image to the inspection decision
For a roof survey, ask the operator to deliver a visible overview and a thermal image of the same section. Give those files to the facilities technician who normally opens the work order. Can that person locate the area on the correct roof, distinguish it from adjacent equipment and decide where a follow-up inspection is needed? A lightweight kit earns its place when its output passes that test and the technician can carry it between sites without another vehicle trip.
For a plant inspection, test the smallest feature the maintenance team needs to distinguish from its surroundings. Use an accessible training asset with a known condition, record the permitted observation position and have each aircraft capture the same view. Keep the original files and inspect them at the size used in the maintenance report. The M30T can save a larger thermal image in its super-resolution mode. Label that mode on sample files so reviewers can judge how much additional detail they can actually use.
Both systems offer spot and area temperature measurements. Agree with the thermographer on the required output before a demonstration. A colored overview may be enough to flag an area for a return visit. A report that assigns a temperature to a component needs an original file suitable for analysis, a record of the surface being assessed and a repeatable way to select the measurement area. Have the analyst reopen the saved data on the organization's workstation before signing off on either kit.
The M30T rangefinder can be relevant when a maintenance report includes a distance to a facade or structure. DJI's published range has conditions for surface size, orientation and reflectivity. Ask for a demonstration on the kinds of surfaces the crew visits and specify how the distance appears in the delivered record. If the facilities team already identifies every asset by bay and equipment number, check whether a distance reading would actually change the report or its follow-up.
Plan for weather and a full shift
A crew that reschedules routine roof work in wet weather may have little use for the larger airframe's IP55 rating. For a crew servicing exposed sites through the year, start with the site's operating policy and decide which conditions normally cause a cancellation. Review the limits of the aircraft, controller and accessories together. On stored or used equipment, inspect seals and covers and ask about repairs that could affect protection. Include the crew's decision to postpone a flight in the operating plan.
Need a quote for this? Tell us what you need →
Use flight-time figures to identify which configuration a supplier has offered. The Mavic's advertised maximum changes with the battery and propellers. Specify that combination on the order. Then test the normal inspection route with the organization's landing reserve and record the time spent obtaining usable images. A long transit between the launch area and the first roof can change the number of completed inspections per battery even when two aircraft have similar published endurance.
Order the ground equipment by model
For the Mavic, include the DJI RC Pro Enterprise and identify the power adapter and hub. If the survey workflow needs RTK positioning, itemize the Mavic 3 Enterprise Series RTK Module and arrange a test with the crew's correction source. Ask the operator to confirm the positioning status and show the analyst where the required information appears in the saved deliverable. The presence of an accessory in the case is only the first part of accepting that workflow.
The M30T uses the DJI RC Plus and flies with two TB30 packs. Count spare power in complete flight pairs. An offer with two flight batteries supplies the set needed to fly the aircraft once. For longer shifts, work backward from the frequency of landings, space in the BS30 station and the supply available at the worksite. Have the crew mark the packs it intends to use together and demonstrate a full changeover before setting the number of spares.
If a remotely operated installation is planned, identify the dock generation and aircraft version on the same purchase line. DJI specifies the M30 series Dock version for the original DJI Dock. An ordinary M30T bought for a manual crew will not become that version by adding a dock later. A newer installation using DJI Dock 3 belongs to a different aircraft family. An offer that says only “dock compatible” leaves a material part of the configuration unresolved.
Check service coverage and accept the files
Both aircraft belong to earlier product generations. DJI has since introduced the Matrice 4T for compact thermal work and the Matrice 4TD for the Dock 3 system. DJI's public service suspension notice reviewed for this comparison gives no service cutoff for either the Mavic 3T or M30T. Ask for a written statement of local stock condition, repair eligibility and battery availability for the serial numbers offered. A published manual alone cannot establish that a factory order is available in the destination market.
Before accepting a fleet lot, select one complete kit and run a representative job from unpacking through report delivery. Have the field technician change a pack, restore the aircraft to its case and pass the card to a colleague. Ask that colleague to recover the originals by asset and visit date using the usual filing procedure. Record any manual steps needed to match visible and thermal frames. If two crews collect data on the same day, verify that their naming convention keeps both jobs distinct.
Write the accepted aircraft variant, controller, battery configuration and image modes into the receiving record. Include one example of the report the maintenance team approved so that a later substitution can be checked against the same task. Contact our team with the destination, typical site access, weather limits, reporting requirements and any existing controller or dock inventory to request a configuration for each crew.
Frequently asked questions
Does the M30T have twice the native thermal resolution?
Its 1280 × 1024 output uses super-resolution. Compare its normal 640 × 512 images with original Mavic 3T files first.
Which kit is easier to carry across multiple roofs?
Start with Mavic 3T. Weigh the packed inspection kit and include the number of spare batteries the route requires.
Can the regular M30T work with the original DJI Dock?
The original Dock requires an M30 series Dock version. Specify M30T Dock version for thermal imaging.
How many TB30 batteries make one flight set?
Two. Check whether the quoted quantity includes the installed pair when counting spare sets.
Will the same thermal framing apply to a Mavic 3T Advanced?
DJI lists a 61° diagonal thermal view for Mavic 3T and 41.2° for Mavic 3T Advanced. Request samples from the exact variant.