DJI Matrice 4T vs DJI Mavic 3 Thermal: Procurement Guide
Compare native thermal detail, lens coverage, radiometric files, visible cameras and field kits for roof, solar and maintenance inspections.
Choose DJI Matrice 4T if an inspector needs a tighter thermal view of individual components and a medium telephoto image to place each finding on the asset. Choose the original DJI Mavic 3 Thermal, also called Mavic 3T, when a wider thermal frame helps a crew document a whole roof or when the team needs a lighter aircraft for a walking inspection. Both produce native 640 by 512 thermal images. At a given distance, the difference an inspector will see first is how much of the asset fits in the frame.
Compare the aircraft and camera configurations
| Part | What to look for | Matching products |
|---|---|---|
| Native thermal image and lens | Both capture 640 × 512 at 30 Hz. Matrice 4T has approximately 45° diagonal coverage. Original Mavic 3T covers 61°. | |
| Thermal measurement | Both span −20 to 150 °C in high gain. Low gain spans 0 to 550 °C on Matrice 4T and 0 to 500 °C on Mavic 3T. | |
| Visible framing | Matrice 4T offers 24, 70 and 168 mm-equivalent views. Original Mavic 3T offers 24 and 162 mm equivalents. | |
| Aircraft weight | DJI lists 1219 g for Matrice 4T with standard propellers and 920 g for Mavic 3T with propellers and without accessories. | |
| Flight-time maximum | Matrice 4T reaches 49 minutes with standard propellers. Mavic 3T reaches 45 minutes with its standard battery and Enterprise propellers. | |
| Controller and RTK | Matrice 4T pairs with RC Plus 2 Enterprise controllers and includes RTK. Mavic 3T uses RC Pro Enterprise and an optional RTK module. |
Send this list as it is and get one price for every part.
Quote the full parts list →The Mavic figures here apply to the original 3T. DJI also lists a Mavic 3T Advanced with a different thermal lens and pixel pitch. The Matrice 4T has itself been followed by the Matrice 5T, introduced in November 2026. DJI continues to identify the older series in its enterprise maintenance information, with regional differences in coverage. The sources reviewed give no worldwide end-of-production date for either aircraft in this comparison. Ask for the model label, condition and service eligibility of the actual unit before approving a substitution or older-stock order.
Choose a field of view for the inspection report
For roof surveys, start with the image that will go into the building owner's report. The original Mavic's 61-degree diagonal thermal field of view includes more roof around a suspect patch than the Matrice's roughly 45-degree view from the same position. A parapet, drain or skylight in that frame can help the maintenance crew locate the patch on foot. Take a visible image from the same viewpoint and ask a colleague unfamiliar with the roof to mark the area on a plan. Their result is a practical test of the context you captured.
For an inspection of a solar array, the Matrice's narrower thermal view assigns more of the native image to an individual panel at the same distance. Its 70 mm-equivalent visible camera gives the inspector a framing option between a wide site overview and a tight component view. Ask for a sample set showing the row, the panel and the thermal finding. Give the files to the technician who will raise the work order. Check whether they can identify the panel unambiguously and recover enough detail for the report.
An archive of previous inspections can change the decision. If the client compares the same roof section from year to year, lay last year's Mavic image beside a proposed Matrice capture. Check whether the reference features still fit around the area of interest. If the new view crops them out, decide whether a second overview image is acceptable and update the shot list. Conversely, when earlier reports repeatedly asked for a closer view of one component, test that framing first on the Matrice.
Evaluate temperature data and file handling
Both aircraft can save 16-bit radiometric JPEG stills and support spot and area measurement. Ask for original radiometric files from the exact model and gain mode proposed. Have the analyst open them on the workstation used for paid work, select an area, adjust the measurement settings needed for that surface and export the report. A colored preview can show where a feature appears, while the original measurement file lets the analyst revisit the reading. Specify which files the client receives and which the operator retains.
Need a quote for this? Tell us what you need →
The Matrice can produce 1280 by 1024 thermal stills with Super Resolution enabled. If an inspection specification calls for a minimum detector resolution, record the native value separately from that output size. For an image-quality trial, ask for native and processed frames of the same component captured from the same position. Judge them at the size used in the maintenance report. Include a small feature and a surface with little temperature variation so the reviewer can see where processing changes the appearance.
Agree on a naming convention for paired images before the demonstration. An inspector may return with several similar views of adjacent rows, each with a plausible warm feature. Have the reviewer match the files to the asset register using only the information that will accompany a real inspection. If the match depends on the pilot remembering a particular row, include an additional visible overview or a recorded asset identifier in the capture procedure.
The published low-gain upper limit is higher on Matrice 4T. Before assigning value to that difference, ask the asset engineer what surface temperatures must be documented and which gain mode the inspection normally uses. Have the thermographer specify the acceptable measurement uncertainty, surface assumptions and reference method. Reflections on metal, a small feature filling only part of a pixel, or a change in viewing angle can affect an interpretation. Include the scene conditions in a sample report so the acceptance decision can be repeated.
Size the field kit around a real shift
A lighter airframe is valuable when an inspector walks between buildings. Weigh the ready-to-carry case with controller, packs, charger and accessories, then have the crew carry it on their usual route. On a vehicle-based job, available charging power and the number of simultaneous crews may matter more than the airframe weight. Time one representative inspection from case opening to file handover. Mark how much time goes to positioning, capture, review and changing batteries before using an endurance specification to decide the order.
DJI publishes windless maximum flight times of 49 minutes for the standard-propeller Matrice kit and 45 minutes for a standard Mavic configuration. Both tests run the battery to zero. Plan the working shift around the organization's landing reserve and the time taken to return from the asset. If low-noise propellers or a different regional battery are proposed, ask for the matching figures and repeat the field estimate. Include stationary inspection time when evaluating a route that involves extended observation of one component.
The controller and positioning hardware belong on separate order lines. The Matrice uses the RC Plus 2 Enterprise family and has an integrated RTK module. The Mavic uses RC Pro Enterprise and can take an accessory RTK module. If precise position records are required, specify access to the correction service and ask for an example file with the metadata your system reads. For each aircraft, identify batteries, charging hub, power supply, propellers and storage media by model. Keep a controller with each kit that goes to a separate field site.
Agree on what receiving staff will check
For a mixed fleet, label cases with the aircraft and controller models and keep the relevant camera settings with each inspection template. Ask both crews to document the same reference asset and hand off their original files without renaming them first. The analyst can then check how the files enter the archive, whether visible and thermal pairs stay together, and how to recognize the camera and mode used. Resolve those questions on one sample kit before ordering enough units for several sites.
For an older-stock purchase, record the battery condition, warranty region and service contact against the serial number. Check that the quotation identifies any optional RTK equipment and that the available software can still open the original radiometric files. Send our team a sample report, the required field of view or component size, the destination, the controllers already owned and the number of crews working concurrently. Those details make it possible to specify a kit around the inspection the client actually buys.
Frequently asked questions
Which model shows more roof from the same position?
The original Mavic 3T has the wider thermal field of view. Check that the feature of interest still occupies enough pixels for the report.
Is the Matrice 4T detector native 1280 by 1024?
Its detector is 640 by 512. Super Resolution produces the larger output. State the native requirement explicitly in a tender.
Which files should we request for temperature analysis?
Request original 16-bit R-JPEG stills with the capture settings and paired visible images. Test them in the analyst's reporting software.
Should an aircraft-only Mavic order include RTK?
Add the accessory module if the inspection workflow requires RTK and the crew has no compatible spare. Include the correction source in the field test.
Does a Mavic 3T Advanced offer match this comparison?
It has different thermal optics. Request a revised specification and a sample from that variant before accepting the substitution.