ChinaDroneRequest a quote →

DJI Matrice 4E vs DJI Mavic 3 Enterprise Procurement Guide

Updated · 8 min read

Compare survey camera intervals, RTK hardware, inspection views and region-specific battery configurations for a mapping crew.

Choose Matrice 4E when the same crew maps a site and photographs individual assets, or when image spacing limits the speed of a survey. Its integrated RTK module also simplifies issuing a complete positioning kit to each crew. Mavic 3 Enterprise, or Mavic 3E, remains a sensible purchase for repeat mapping where the established method already meets the client's tolerance. A fleet manager can make that decision from two records the survey team probably already keeps. Compare the last project's checkpoint report and the time spent collecting and processing its images.

Compare the survey configurations

DJI Matrice 4E vs DJI Mavic 3 Enterprise at a glanceIntervals refer to timed wide-camera stills. Endurance varies with the battery and propellers fitted.
PartWhat to look forMatching products
Survey cameraBoth offer a mechanical shutter, 20 MP Four Thirds sensor and 24 mm-equivalent wide lens.
Shortest intervalMatrice 4E records JPEG every 0.5 s or JPEG plus RAW every 2 s. Mavic 3E records them every 0.7 s or 3 s respectively.
Inspection opticsMatrice 4E adds 48 MP cameras at 70 and 168 mm equivalent and a laser rangefinder. Mavic 3E has a 12 MP tele camera at 162 mm equivalent.
RTK hardwareIntegrated on Matrice 4E. Order the top-mounted RTK module for Mavic 3E if needed.
Environmental sensingBoth have omnidirectional binocular vision with downward infrared sensing. Matrice 4E specifies a downward three-dimensional infrared sensor.
Standard flight and hoverWindless maxima with standard configurations are 49 and 42 minutes for Matrice 4E, versus 45 and 38 minutes for Mavic 3E.

Send this list as it is and get one price for every part.

Quote the full parts list →

Both wide cameras use a mechanical shutter and a 20 MP Four Thirds sensor. They give a mapping team similar starting points for planning ground coverage from a given height. The important timing difference depends on the files the surveyor intends to save. The shortest wide-camera JPEG intervals are 0.5 seconds for Matrice 4E and 0.7 seconds for Mavic 3E. With JPEG and RAW saved together, the respective minima are two and three seconds. Check the project archive policy before specifying a flight around the faster figures.

At a constant ground speed of ten metres per second, half a second between exposures puts successive camera positions five metres apart. Seven tenths of a second puts them seven metres apart. These are illustrative distances along a straight line. The survey designer still needs the image footprint, required overlap and local terrain to choose a working speed. If the crew already flies slowly enough to achieve the necessary spacing on Mavic 3E, the shorter interval alone offers little reason to replace a proven kit.

Choose by the deliverable

For a recurring earthworks survey, retrieve one accepted project and note the specified ground sampling distance, coordinate reference system and independent checkpoint results. Ask the supplier to provide a comparable sample dataset, including original photos and their position information. Process it with the software and settings the survey office actually uses. Compare the finished surface at checkpoints and around changes in grade where a visually tidy reconstruction can conceal a measurement error.

For a facilities inspection, give the buyer and the engineer the same short list of required photographs. A typical report might need the whole roof, the location of a particular vent within that roof and the condition of the flashing beside it. Matrice 4E offers 24, 70 and 168 mm equivalent views. The middle lens can keep enough surrounding structure in the frame to locate a defect on the drawing. Mavic 3E has a 24 mm wide view and a 162 mm telephoto view. Have the engineer judge both sets at the scale used in the maintenance record.

Matrice 4E also carries a laser rangefinder. If an inspection form has a field for distance, identify what its author wants measured. A line-of-sight reading to a visible building surface and a vertical dimension on a drawing describe different quantities. Ask the receiving engineer to review an example with the subject, camera position and measured point clearly identified. For a job that only requires photographs keyed to an asset number, the additional measurement may have little bearing on the order.

Specify positioning and verify the finished map

RTK is built into Matrice 4E. Mavic 3E uses an optional module fitted to the aircraft's top accessory port. Count modules by the number of crews that must collect corrected imagery simultaneously. A shared module can work for aircraft assigned to alternate shifts, provided someone has responsibility for moving it and verifying the next kit. For crews sent to separate sites before dawn, put the module in each case and include its presence in the dispatch check.

Need a quote for this? Tell us what you need →

Agree with the survey lead on a correction source, how it will be accessed on site and the coordinate system for delivery. Include any required service access or base equipment in the inquiry. During acceptance, have an operator obtain a fixed solution, capture the sample and hand the files to another person for processing. Ask the processor to verify the reference frame and height convention. Precise camera positions can still produce a deliverable in the wrong datum.

Keep independent checkpoints out of the data used to fit the model. Select the check locations before examining the results and document how their coordinates were measured. The buyer can then compare the delivered map against an agreed tolerance. A specification for receiver positioning describes one component of the measurement chain. Terrain, camera geometry, image quality and processing decisions all affect the final result, so a blanket promise of centimetre accuracy would give the buyer little basis for acceptance.

One issue worth checking in a repeat survey is whether the new camera files line up with the office archive. Give the processor a prior deliverable and the new flight data without changing the project's coordinate settings. Ask for a comparison over stable ground as well as the new works. A shift across the entire site is a reason to investigate the reference settings before interpreting local differences as construction progress.

Count the equipment needed for a full shift

DJI rates Matrice 4E at up to 49 minutes in windless forward flight with standard propellers, or 46 minutes with low-noise propellers. Mavic 3E reaches up to 45 minutes with the standard battery and enterprise propellers. The EU C1 battery and low-noise propeller combination has a published maximum of 36 minutes. Have the survey crew estimate working time with its return reserve, transit to the survey block and any interruptions for site traffic. Match the estimate to the aircraft configuration the supplier is offering.

Count controllers and charging equipment separately for the two fleets. DJI identifies RC Plus 2 Enterprise for Matrice 4E and RC Pro Enterprise for Mavic 3E. The Matrice hub takes its own series battery and charges up to four packs in sequence. List spare packs, hubs, power adapters, cards and replacement propellers by part number. At a remote job, record what can be charged between flights using the vehicle or site supply that will actually be available.

Order the intended regional version

Request the aircraft's exact sales designation and region, the battery designation and the fitted propeller set. This matters particularly for the European C1 version of Mavic 3E. DJI describes approval at the complete-system level. Installing the lighter battery alone cannot convert another aircraft into the certified configuration, and using a standard pack on the C1 aircraft invalidates that configuration's C1 status. Obtain the markings and documentation for the delivered system if classification affects the project.

For transport planning, DJI lists 99.5 Wh for the Matrice pack, 77 Wh for the standard Mavic pack and 65.15 Wh for the Mavic EU C1 pack. Send the carrier the exact pack labels, quantities, route and packing arrangement. Ask for the packaging instructions and battery test documents required for that consignment. Include travel by the survey crew in a separate airline check when the aircraft or spare packs will accompany personnel.

A useful handover ends with a processor opening the dataset and a field technician repacking the complete kit for the next shift. Keep the packing list, firmware versions, correction method, test images and checkpoint report together so the next purchase can be evaluated on the same basis. Contact our team with the intended survey product, required tolerance, inspection views, destination and existing RTK equipment for an itemized fleet inquiry.

Frequently asked questions

Which kit needs a separate RTK module?

Mavic 3E uses the optional top-mounted module. Matrice 4E includes RTK hardware. Specify the correction source for either aircraft.

Can we collect RAW at the fastest advertised interval?

For wide-camera JPEG plus RAW, the shortest settings are two seconds on Matrice 4E and three seconds on Mavic 3E.

Which offers an intermediate inspection view?

Matrice 4E has a 70 mm-equivalent camera between its wide and telephoto views, useful when a report needs to show a component in context.

Does the lighter Mavic battery confer C1 status?

DJI requires the approved complete configuration. Verify the airframe version, pack, propellers and documentation together.

How should we evaluate mapping accuracy?

Process a representative dataset and measure errors at independent surveyed checkpoints in the specified coordinate system.