DJI Matrice 350 RTK vs DJI Matrice 4TD, with Matrice 400 as an Upgrade Option
Choose between interchangeable survey payloads and an integrated thermal aircraft, and identify where Matrice 400 fits an existing enterprise fleet.
A survey crew that needs a Zenmuse P1 on Monday and a Zenmuse L2 on Thursday has a reason to keep its Matrice 350 RTK. A facilities manager who wants thermal and visible records of the same roof every week has a reason to evaluate the Matrice 4TD. The first purchase secures a carrier for interchangeable instruments. The second puts a known set of cameras at a site, with the option of running them from DJI Dock 3. For teams renewing the carrier itself, DJI's newer modular flagship, Matrice 400, belongs in the comparison.
Compare what the aircraft carries
| Part | What to look for | Matching products |
|---|---|---|
| Aircraft weight with batteries | 350 RTK about 6.47 kg, 4TD about 1.85 kg including cameras, and 400 about 9.74 kg before mission payload. | |
| Maximum takeoff weight | 350 RTK 9.2 kg, 4TD 2.09 kg, 400 15.8 kg. | |
| Payload architecture | 350 RTK carries up to 2.7 kg. The 4TD integrates its mission cameras. The 400 supports up to 6 kg in a specified mount configuration. | |
| Imaging | 350 RTK and 400 accept interchangeable gimbals. The 4TD combines 24, 70 and 168 mm equivalent visible cameras with 640 × 512 native thermal imaging. | |
| Maximum forward flight | 350 RTK 55 minutes without payload, 4TD 54 minutes with its cameras built in, 400 59 minutes with H30T. | |
| Weather protection | DJI rates all three aircraft IP55. Dock 3 has a separate IP56 rating. |
Send this list as it is and get one price for every part.
Quote the full parts list →Read the endurance figures with the payload attached to each test in mind. DJI measured the 350 flying without a mission payload. Its test of the 400 included an H30T. The 4TD carried its integrated cameras, flew forward in controlled conditions and took no pictures during its endurance test. A one-minute difference between two catalog figures tells a thermal inspector very little about time available over a roof. Ask for a trial that includes the climb, inspection stops, return flight and your required landing reserve.
For a mobile survey crew, start with the deliverable
Write down the last three jobs the fleet completed and the file the client accepted for each one. An orthomosaic from a camera survey and a classified point cloud from a laser survey may depict the same site, but the acquisition and processing work differ. If the crew already owns a P1 or L2 and has a validated process for its files, the 350 can preserve that investment. Put the exact instrument, mount and processing software in the inquiry so a proposed replacement can be evaluated against the same deliverable.
The 4TD makes more sense when a job calls for several views of one asset on each visit. Its thermal camera can show an area of interest, the wide camera can place that area on the roof, and the longer lenses can record visible details. Give the inspector sample files from the proposed aircraft. Have them locate the same feature in the thermal and visible images and attach both to an ordinary work order. That checks whether the records answer the maintenance team's question at the distance the crew can use.
For sites visited only occasionally, compare a manually flown 4TD with a docked installation. DJI supports standalone use with DJI RC Plus 2 Enterprise. A pilot can therefore evaluate the integrated cameras at several sites before the organization commits to a permanent installation. Ask for separate equipment lists for those two configurations. A controller, field charging equipment and a carrying case serve a traveling crew, while a fixed installation brings power, network and service access into the purchase.
Decide whether a dock earns its place
A weekly inspection can justify a dock when travel and site access consume a substantial part of every visit. Review several months of work orders with the facilities manager. Count how many visits covered the same assets and how many required a technician on the roof anyway. Then identify who will review the images and assign follow-up work. Those details help determine whether recurring flights would save a journey or simply add another set of files to the maintenance queue.
Walk the proposed dock site with the people responsible for facilities and networking. Allow space for the cover to open and for a technician to reach the equipment. Record who can authorize electrical work, restore connectivity and provide access after hours. Ask for a demonstration of how the remote operator learns that an inspection was missed and how a local technician returns the system to service. Include installation, commissioning and operator permissions as separate items so ownership of each task is clear at handover.
Need a quote for this? Tell us what you need →
Audit payloads and accessories before changing carriers
The 350 supports DJI's H20 family as well as H30-series payloads, L2 and P1. The 400 has its own compatibility list, including H30T, L2 and P1. A team with several H20-series cameras should request explicit confirmation for each proposed migration. In the inventory, record the camera version and connector alongside the asset number. A familiar family name on a quote is insufficient when a particular mount or a specific camera within the family determines whether a crew can take a job.
Pay particular attention to the 400's headline load rating. DJI specifies 6 kg at sea level using the third gimbal connector with screw fastening. The quick-release arrangement on that connector is rated for 3 kg, and the other mounting positions have their own limits. Ask the integrator to identify the mounting position, fastening method and total installed weight on a drawing of the proposed assembly. Review clearance around the instrument and request an example data capture with that assembly before accepting a custom configuration.
For a 350 already in service, list the paired TB65 batteries, station and controller that would follow the aircraft to its next crew. For a 400 proposal, request the specified battery, station and controller as individual lines. Record which pieces can be reassigned and which would leave an existing crew short. Include duplicate leads or stations where crews depart from different depots. The warehouse may show a spare charger in stock while the survey team needs it on the other side of the service area.
Set procurement and handover criteria
DJI introduced the 400 as its new enterprise flagship in June 2025. Treat the 350 as the earlier modular generation and confirm local orderability, service arrangements and battery supply in writing. The launch establishes the change in flagship position. It does not establish a worldwide end-of-service date. For an earlier unit, ask for pack histories and maintenance records and check whether the proposed configuration qualifies for service in the destination region. A functioning aircraft with an unserviceable mission camera can still leave the project without its required deliverable.
In the acceptance trial, hand the captured files to the person who normally processes the work. For a mapping order, have that person check the coordinate reference, open the dataset and compare the result against independent project checks. For thermal inspection, check the native thermal file and the visible reference image together. For dock work, verify that the remote reviewer can retrieve both after the flight and that the site team can identify the matching inspection. Record any manual step that must be repeated on every visit.
A useful final comparison fits on one job sheet. Enter the sensor needed, where the crew will launch, who will process the files, and what happens if the assigned aircraft is away for repair. A 350 may let the team move an instrument to another compatible carrier. A docked 4TD may keep the required sensors at the property between inspections. A 400 may accommodate a planned instrument that exceeds the older carrier's capacity. Test the assumption that matters to the contract before approving the equipment list.
Have the data owner sign off on one exported deliverable before releasing a fleet order. Keep its source files and configuration record for comparison when a replacement payload arrives.
Contact our team with your payload inventory, sample deliverable, intended sites and any dock requirement. Include the destination and the number of crews that need to operate simultaneously.
Frequently asked questions
Which model can keep our Zenmuse P1 in use?
DJI lists P1 for both modular carriers. Specify the mount and validate a complete survey file on the selected aircraft.
Does a 4TD order require Dock 3?
No. DJI supports standalone flight with RC Plus 2 Enterprise. Include field charging equipment for a traveling crew.
Can a single downward mount carry 6 kg on the 400?
No. The 6 kg rating applies to screw fastening on the third gimbal connector at sea level.
Should a thermal inspection contract use the catalog flight time?
Use measured time with the required camera, inspection stops, local conditions and landing reserve.
Which newer aircraft follows the 350 for modular work?
Matrice 400 is the newer modular flagship. The 4TD fits recurring inspections that can use its built-in cameras.