ChinaDroneRequest a quote →

DJI Matrice 350 RTK vs DJI Matrice 300 RTK: Procurement Guide

Updated · 8 min read

Compare surveying payloads, controllers, battery pairs and support status when replacing or extending a Matrice fleet.

A survey department that owns a Zenmuse P1 can move that camera to a Matrice 350 RTK and keep its established image-processing workflow. The harder question is which parts of the field kit can move with it. Budget for a controller, count batteries in usable pairs, and identify who will service each aircraft. Those details matter more to this purchase than flight time. DJI gives the Matrice 350 RTK and Matrice 300 RTK the same maximum of 55 minutes.

Compare the aircraft as working kits

DJI Matrice 350 RTK vs DJI Matrice 300 RTK procurement comparisonMaximum flight time describes a manufacturer test. Mounted instruments and landing reserves reduce usable collection time.
PartWhat to look forMatching products
AirframeDJI lists a 9.2 kg maximum takeoff weight for the M350 and 9 kg for the M300, with up to 55 minutes of flight for each.
Ingress protectionM350 is rated IP55. M300 is rated IP45.
Flight batteriesM350 uses TB65 pairs and also accepts TB60 pairs. The original M300 kit uses TB60 pairs.
ControllerM350 uses DJI RC Plus. M300 can use its original controller or a suitably updated RC Plus.
Mapping payloadsDJI lists Zenmuse P1 and L1 for both platforms.
LifecycleDJI lists M350 alongside the newer Matrice 400 and places M300 in its no-longer-available group.

Send this list as it is and get one price for every part.

Quote the full parts list →

The M350 is the more straightforward choice for a crew setting up a survey kit from scratch. DJI places the M300 among products it no longer supplies. An existing M300 can still earn its place on repeat surveys if its condition, service arrangements and output meet the contract. A replacement bought from remaining stock needs its own condition assessment. DJI also lists the newer Matrice 400, so a purchase request that specifies the latest Matrice generation should be clarified before naming the M350.

Consider a quarry that commissions a surface model every month. If the last survey passed acceptance, start with the records from that job. Identify the camera, lens, correction source, processing settings and checkpoints. Moving the same P1 to an M350 lets the department test the airframe change while retaining much of the proven survey setup. If the present M300 has already missed visits because packs were unavailable, include the battery inventory in the evaluation. A second airframe alone would leave the scheduling problem unresolved.

Specify the instrument and the survey result

For photogrammetry, ask for one complete P1 dataset from the proposed configuration. Give the original images to the analyst who produces the client deliverable. Check that the coordinates arrive in the intended reference system and that the surface model meets the agreed checkpoint tolerance. Keep a copy of the processing report with the kit record. The letters RTK identify a positioning capability. The quality of a final map also depends on the camera setup, control, processing and independent checks.

For a crew using a Zenmuse L1, a preview of the point cloud on a controller is only the beginning of the handover. Ask the supplier for the complete job folder and have the office reconstruct a short section containing a roof edge, a slope and open ground. Check for offsets between adjacent passes and confirm that the analyst can recover the observations needed for processing. Both airframes support L1, so an incomplete folder can undermine an otherwise sensible decision to reuse a sensor.

Treat custom instruments separately from DJI payloads. DJI says some third-party systems using SkyPort V2 or X-Port can work on M350 after adapter and payload firmware updates. Ask the instrument maker to identify the tested versions and demonstrate a recorded measurement. Include the adapter in the equipment list even if it usually stays attached to the camera. A loaned instrument in a demonstration may carry a different adapter revision from the one already sitting in the survey department's case.

Work out how many complete field kits you own

Check controller compatibility in both directions. The original M300 controller cannot operate an M350. DJI supports a suitably updated RC Plus on the M300 after the operator selects the model in DJI Pilot 2 and links the aircraft. For a single crew replacing an aircraft, that gives the new controller a second use. For crews working at separate sites, allocate a controller to each site and verify that both operators can load their jobs before they leave the office.

Need a quote for this? Tell us what you need →

M350 takes a pair of TB65 batteries or a pair of TB60 batteries. A shelf containing one healthy pack of each type provides no complete pair. Record the serial numbers, condition and recent operating history of the packs that will travel together. Count the pairs that remain after removing any pack awaiting inspection. Include the battery station model and its power lead on the order. For legacy equipment, ask to see the station charge the actual pair offered with the aircraft.

Charging capacity can change the kit count. The BS65 has room for eight TB65 packs and charges two TB65 packs at once. A full station at the start of a shift and a station connected to power between jobs serve different schedules. Have the field lead draw up a day with two visits, travel between them and the usual access to mains power. Identify which pairs must leave the depot charged and when a depleted pair can realistically return to service.

DJI permits M300 propellers on the M350 when the aircraft uses one type throughout. Check the markings on loose spares before treating them as shared stock. At handover, pack each aircraft with a complete approved set and label the spares by type. Apply the same discipline to gimbal mounts and transport cases. Ask the operator to pack and unpack the proposed combination with the items the crew actually carries, including the station and any equipment for position corrections.

Set realistic acceptance conditions

DJI measured the M350 maximum flight time without a payload, in still air, flying until the battery reached zero. A useful scheduling figure is the time spent collecting accepted data with the survey instrument installed. Record transit, collection and the operator's normal landing reserve separately on a representative job. If access to the site is limited to a morning window, use those observations to decide how much of the work one crew can finish during that window.

The M350 airframe carries an IP55 rating and the M300 carries IP45. DJI notes that the M350's protection can diminish with wear. Ask for a close inspection of seals and covers on a used aircraft and check the environmental limits for the attached instrument. A survey kit includes the controller and equipment on the ground as well. For wet sites, identify a sheltered place to change batteries, handle recording media and pack the instrument at the end of the job.

Specify how crews will obtain RTK corrections. DJI documents network corrections and the D-RTK 2 Mobile Station for the M350. If crews rely on a network service, demonstrate the connection under the organization's own field arrangements. If they routinely use a base, include its mounting equipment and power supply in the packing check. Have the analyst confirm the stated base position and reference system against the project records before accepting the trial result.

If the new aircraft will share one P1 with the old one, rehearse the changeover at the depot. Time how long it takes to remove the camera, mount it on the second aircraft, confirm the settings and record a usable test image. That interval belongs in the schedule whenever two surveys depend on one instrument.

For a legacy purchase, request a record of repairs, a battery report and written service options for the destination. Agree on an acceptance window that gives the survey analyst time to process the files. Keep the serial numbers of the demonstrated aircraft, controller and instrument together so a substitution can be checked before dispatch. Contact our team with your payload models, controller inventory, working battery pairs and the survey output you need. Those details allow the inquiry to specify a complete kit for each crew.

Frequently asked questions

Can a crew keep its P1?

Yes. DJI lists P1 for both aircraft. Include the mount and lens in the acceptance test and process a sample block before releasing the kit.

Can we install one TB60 and one TB65?

DJI requires two of the same battery model on M350. Count serviceable pairs when sizing the fleet.

Will the original M300 controller operate M350?

No. Specify RC Plus for M350. An updated RC Plus can also link to M300 after selecting the aircraft in DJI Pilot 2.

How much survey time should we allow per pair?

Measure a representative collection block with your payload and landing reserve. The published 55 minutes is a flight maximum.

Is M300 still a new-platform option from DJI?

DJI lists it as no longer available. Verify the origin, condition and service options for any individual unit on offer.