DJI Inspire 3 vs DJI Inspire 2: Procurement Guide
Compare Inspire 3 and an X7-equipped Inspire 2 for cinema work, including capture modes, lenses, media, licensing and service dates.
Choose DJI Inspire 3 if the production needs full-frame 8K originals, synchronized timecode or repeatable camera moves for effects plates. Consider an existing Inspire 2 with Zenmuse X7 when the job must match earlier Super 35 aerial footage and production can cover the risk of a legacy aircraft going out of service. For a buyer starting from an empty case, the strongest reason to choose between them is the file the editor must receive. Settle that question with the cinematographer and post supervisor before writing the equipment list.
Compare the recording configurations
| Part | What to look for | Matching products |
|---|---|---|
| Camera | Inspire 3 pairs the full-frame X9-8K Air with the aircraft. Inspire 2 with X7 captures on a Super 35 sensor. | |
| RAW recording | Inspire 3 reaches 8K/25 fps in CinemaDNG or 8K/75 fps in ProRes RAW. Inspire 2 with X7 reaches 6K/30 fps in either format. | |
| Positioning and sync | Inspire 3 supports RTK and timecode synchronization. DJI lists neither feature for Inspire 2. | |
| Power and media | Inspire 3 uses TB51 and PROSSD. Inspire 2 uses TB50 and CINESSD for the RAW workflow. | |
| Maximum flight time | DJI compares 28 minutes for Inspire 3 with 23 minutes for Inspire 2 carrying X7. |
Send this list as it is and get one price for every part.
Quote the full parts list →The Inspire 2 camera matters as much as the name on the aircraft. This comparison assumes the X7. Ask anyone offering a used package to identify the gimbal camera and lens and provide a camera original from that combination. On the Inspire 3 side, specify X9-8K Air and the recording mode. An offer that says only “8K capable” leaves open whether the necessary license is active and whether the chosen codec supports the frame rate in the shooting brief.
For a production delivering in 4K, ask the editor to show the most demanding reframe expected in the cut. Shoot a test with architectural detail near the edges and a subject moving through the intended crop. Have the editor apply stabilization, crop and grade in the order used on the show. If the X7 file holds up through that sequence, a familiar camera and lens package may be the better choice for a pickup day. If the director needs a tighter crop, test the 8K original through the same sequence.
Match the system to the shot list
For an effects sequence filmed across several visits, put Inspire 3's RTK positioning and Waypoint Pro repeatable routes on the test sheet. Ask the effects supervisor to compare two passes of the same static foreground against a distant background. Small changes in viewpoint can be easy to miss on an outdoor monitor and conspicuous when the plates are overlaid. Save the reference clip, lens choice, framing and camera settings with the shot record so a different crew can prepare for the return visit.
For an interview sequence intercut with location aerials, timecode can matter more than resolution. Inspire 3 supports timecode synchronization. Have the sound or camera department supply the time reference it plans to use and ask editorial to identify the matching take after ingest. Include the relevant connection hardware in the equipment list. For an X7 shoot, agree on a slate or another synchronization procedure with the assistant editor, particularly if several cameras will carry similar file names into the edit.
For archive matching, take a frame from the original Inspire 2 shoot to the test. Mounting a lens of the same focal length on a full-frame camera changes the area it covers compared with Super 35 when using the full sensor width. Match viewpoint and framing first, then compare texture, motion and color on the production monitor. An attractive new image can still be expensive to intercut if the perspective of a familiar building changes halfway through a sequence.
Buy the lenses, power and media as one package
Inventory DJI DL 24, 35 and 50 mm primes individually. DJI lists these focal lengths for both systems. Check the exact mark on the barrel and include the hood, balancing hardware and filters that go with the intended setup. The wider X7 lens in an old case deserves particular attention. DJI lists the 16 mm for X7 and the 18 mm for X9-8K Air. The X7 filter set uses a different diameter from the Inspire 3 DL 18 mm filter. Fit the proposed filter and check the frame edges before committing to a set.
Need a quote for this? Tell us what you need →
The gimbal camera, controller, flight batteries and recording media are generation-specific. An Inspire 3 kit needs TB51 batteries and a compatible hub. Keep TB50 pairs and the means to charge them with Inspire 2 while it remains assigned to shoots. At a two-unit location, count how many complete pairs each crew can take away at call time. A box of spare batteries at the production office offers little help when the two units are filming at different locations.
Inspire 3 records to DJI PROSSD, and the 1 TB drive can be read through a suitable USB-C connection. A legacy Inspire 2 RAW kit needs its CINESSD workflow, including a reader. Ask the digital imaging technician to copy a full test take to two destinations, verify the files and relink them in the edit. Time that process on the laptop and drives that will travel. A package with one recording drive can leave the camera waiting while the technician makes and verifies the second copy.
Put the production requirements on the order
List the codec, frame dimensions, capture rate and intended playback rate together. Inspire 3 reaches its highest published 8K rate in ProRes RAW. Its CinemaDNG maximum at 8K is 25 fps. DJI sells the Inspire 3 RAW license separately, so request proof for the aircraft offered and ask the operator to record the exact mode. Send that file to post with audio or timecode notes as applicable. Confirm that editorial can generate proxies and that finishing can reconnect the original at the correct cadence.
For a two-person aerial unit, give the pilot and gimbal operator their usual positions in the demonstration. On Inspire 3, specify the RC Plus configuration each operator requires and check the director's monitoring connection as a separate item. Ask the camera assistant to read exposure and focus from the monitor that will actually be used outdoors. A clean recording on the aircraft and a usable viewing arrangement for the director are separate acceptance checks, and each has its own cables, power and setup time.
For jobs that mix ordinary motion and slow motion, record a slate at the head of each test clip with the intended playback speed. Send the pair through the actual finishing software and ask the editor to return a short cut. Check the aspect ratio and the transition between the two shots on the delivery screen. It is easier to resolve an unexpected crop or a mistaken playback setting in this test than after the aircraft leaves the location.
Treat endurance as a rehearsal input. DJI's comparison gives a 28-minute maximum for Inspire 3 and 23 minutes for Inspire 2 with X7. DJI's Inspire 3 forward-flight test continued to zero indicated battery in still air. Have the crew time a realistic sequence from setup through rehearsal, recording and landing with its usual reserve. Count how many takes passed review before the battery change. That number gives the production manager a firmer basis for planning a location day.
DJI suspended Inspire 2 production in January 2022. Its US support notice gives December 1, 2026 as the service suspension date. Check the applicable region and arrange a replacement plan before putting a used aircraft on a call sheet that extends beyond that date. Ask for condition records for the gimbal as well as the airframe, and reserve a test day before the first paid shoot. Contact our team with the shot list, required master format, existing DL lenses and media workflow so the inquiry covers everything needed to hand footage to editorial.
Frequently asked questions
Which camera does the 6K comparison assume?
Zenmuse X7 on Inspire 2. Require the camera name, lens and a clip from the actual kit on every used-system offer.
Does the Inspire 3 purchase include RAW recording?
DJI lists the RAW license separately. Check activation and record the required codec during acceptance.
Which X7 lenses should we inventory first?
Start with the DJI DL 24, 35 and 50 mm primes. Confirm the exact lens and balance accessories against the X9-8K Air configuration.
Can our Inspire 2 media go into Inspire 3?
No. Plan the PROSSD workflow for Inspire 3 and keep a working CINESSD reader with the legacy system.
When does DJI list Inspire 2 service suspension?
The US support notice lists December 1, 2026. Confirm arrangements for the serial number and service region before assigning the aircraft to a production.