ChinaDroneRequest a quote →

DJI Goggles N3 vs DJI Goggles 3 Procurement Guide

Updated · 8 min read

Compare DJI Goggles N3 and Goggles 3 for glasses wearers, shared Avata 2 training kits and mixed O3/O4 fleets. Check display fit, controller pairing and accessories.

Choose DJI Goggles N3 for a shared FPV kit if operators want to keep their everyday glasses on and can read the whole display comfortably. Choose DJI Goggles 3 when existing DJI O3 Air Units must stay in use, or when a regular pilot benefits from adjustable optics and a faster display. An Avata 2 owner can consider either headset. For a club, school or production crew, the purchase hinges on who will wear it next, which aircraft they will pair and what the instructor or director needs to see.

Compare the headsets as worn

DJI Goggles N3 vs DJI Goggles 3Refresh rate describes the goggles display. Video transmission settings depend on the paired aircraft or air unit.
PartWhat to look forMatching products
DisplayN3 has a 3.5-inch 1920 × 1080 display rated up to 60 Hz. Goggles 3 has 0.49-inch 1920 × 1080 displays rated up to 100 Hz.
Field of viewDJI lists 54° for N3 and 44° per screen for Goggles 3.
Optical fitN3 accommodates personal glasses. Goggles 3 has a 56–72 mm interpupillary adjustment and a built-in diopter range of −6.0 to +2.0 D.
Headset weightN3 weighs 536 g including headband and battery. DJI lists Goggles 3 at approximately 470 g including battery.
Viewing the surroundingsGoggles 3 offers Real View picture-in-picture. N3 lacks Real View.
StorageBoth take microSD cards up to 512 GB for supported recording and playback functions.

Send this list as it is and get one price for every part.

Quote the full parts list →

A wider field of view can make a scene feel more immersive, yet an instructor also needs novices to notice messages near the edge of the picture. Put both headsets on the same user and show the same scene with the normal screen information visible. Ask the wearer to read the smallest text they expect to use and identify a symbol in each corner. Repeat the comparison after removing and refitting the headset. That second attempt matters in a class where a new person adjusts the strap every few minutes.

Fit for glasses wearers and regular pilots

N3 has space for personal glasses and requires no adjustment for the distance between the eyes. It suits a demonstration where visitors arrive with different prescriptions. Frame shape matters as much as lens correction. Ask volunteers with narrow and wide frames to put the headset on, wear it through a typical lesson and remove it without catching the temples in the padding. Check whether tightening the strap shifts their glasses enough to blur small text. A brief look across a trade-show table can miss that problem.

Goggles 3 lets each wearer set eye spacing and diopter correction. For a pilot who uses the same headset every day, take time to get each eye clear and write down the settings. DJI describes fitting prescription lenses for wearers who need astigmatism correction or whose needs fall outside the built-in adjustment. If the order includes inserts, specify whose headset they belong to and how they will be identified. A shared case with unlabeled inserts creates extra work every time an instructor hands it to another pilot.

Compare pressure on the forehead and cheeks with the headband adjusted as it would be for a full session. Give a seated editor or instructor a turn as well as the pilot if both will use the equipment. A person who only needs to observe may prefer a separate preview on another screen. Establish who actually needs a fitted headset before deciding how many pairs to buy. This can also simplify cleaning and reduce the number of prescription fittings the organization has to manage.

Match the goggles to the aircraft already owned

Make an inventory using the label on each aircraft or video unit. “DJI digital” in an old equipment spreadsheet gives too little information. Both goggles are options for Avata 2, Neo and the O4 Air Unit series. Goggles 3 also has documented O3 Air Unit support. A club with O3-equipped training aircraft therefore has a concrete reason to specify Goggles 3 even if a member prefers the fit of N3. Identify the pairing needed for every class before standardizing on one model.

Need a quote for this? Tell us what you need →

The remote controller is a separate line on that inventory. For O4 Air Unit equipment using DJI's own radio, DJI pairs either of these headsets with DJI FPV Remote Controller 3. Third-party radio systems have their own receiver requirements. For Avata 2, note whether the lesson uses motion control or conventional sticks and run the demonstration with that controller. If an aircraft belongs to a different team, make sure the checkout process leaves enough time to restore its usual pairing before returning it.

Decide what the pilot and the observer must see

The two models have the same nominal screen resolution, but screen size, field of view and refresh rate differ. With a suitable source, Goggles 3 can display up to 100 Hz. N3 has a 60 Hz panel even when the aircraft transmits a higher frame rate. For an indoor filming rehearsal, compare the view during a slow pan past door frames or vertical signs. Use the same aircraft, lighting and transmission settings, and let the pilots judge whether the difference affects their ability to frame the shot.

Goggles 3 offers Real View picture-in-picture, which can help a seated operator locate a nearby item while wearing the headset. N3 users should plan to lift or remove it when they need to see the room. Try the actual handoff during a training session. Check whether the wearer can set the controller down, take instruction, refit the headset and regain a clear view without an assistant readjusting it. That sequence can matter more to class scheduling than the time spent changing aircraft batteries.

An instructor who needs to follow the pilot's screen should test the viewing arrangement as part of the purchase. Bring the phone, cable and app planned for the class, check that the instructor can read the prompts from their usual position, and confirm that the preview returns after a headset change. If sessions will be recorded, play back a sample to check whether it contains the information the instructor wants to discuss. Keep the recording card and the device used for viewing on the kit list.

Specify accessories, care and acceptance

Both headsets have integrated batteries and support charging from a power bank during use. Think through a teaching day with short gaps between sessions. Identify where each headset sits during breaks, whether a power cable reaches that spot and who checks the charge before the next class. A charging point shared with aircraft and phones can become the limiting resource. Try an ordinary teaching schedule with a loan kit before buying enough equipment for several groups to run at once.

DJI lists replaceable foam for both models. Order padding for the named headset and have staff practice removing and refitting it before estimating changeover time. Provide a clean place to put the headset down and a way to protect its lenses from direct sunlight between sessions. If kits travel between classrooms, keep any individual lens inserts in labeled protective cases. Check fit with the actual case closed, including cables and spare padding, so the optics do not rub against loose parts during transport.

For a mixed fleet, put the aircraft and controller names on the outside of each case. During the trial, hand the closed case to an instructor who did not assemble it and ask them to start a lesson. If they have to call the pilot to identify a compatible controller, revise the labels and packing list before ordering the remaining sets.

At acceptance, verify the model label, inspect the lenses and show a bright and a dark scene to each intended wearer. Pair one unit with the oldest aircraft the order must cover and another with the newest. Document the working firmware versions, controller model and viewing arrangement for repeat orders. For an inquiry, send our team the destination, aircraft and air-unit inventory, controller types, typical session length and number of people sharing each headset. Include any prescription or observer-screen requirements that affect the kit contents.

Frequently asked questions

Which is easier to share among people who wear glasses?

Start with N3 and test the actual frames. Goggles 3 suits users who can set the optics for themselves or use individually fitted inserts.

Can both headsets serve an Avata 2 class?

Yes. Test each headset with the Avata 2 aircraft and controller the class will use, including any features the instructor intends to demonstrate.

Will N3 cover an existing O3 Air Unit?

DJI lists O3 support for Goggles 3. Its N3 compatibility guidance lists the O4 Air Unit series. Select Goggles 3 for a kit that must cover O3.

Will a 100 fps feed make the N3 screen refresh at 100 Hz?

The N3 display is rated up to 60 Hz. The incoming transmission frame rate and the panel refresh rate describe separate stages.

Can either headset run from a power bank during a break?

DJI supports USB-C power-bank charging during use on both. Test the cable and power bank that will travel with each kit.